Public Works Department-PWD has published Tender For Providing And Laying Of Furniture Of Vwdc Room Alwar. Submission Date for this Tender is 26-03-2024. Computer Furniture Tenders in alwar Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing & laying of Furniture in VWDC Room Alwar |
| 2 | Providing making and fixing dias table furniture ( Racks & leg supports of dias table) by jointing made of 25mm thick Block board of approved ISI make and laminiated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhestive, nails, screws rawl plugs etc. edges of all these members are restored by fixing of plain/ moulded teak wood 27x10 mm beading with the help of nails, adhesive etc. complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in-charge ( Area of block baord will be measured horizontal & Vertical for payment) |
| 3 | Providing making and fixing dias table furniture ( Top of dias table) on rack support made of 35mm thick Block board of approved ISI make and laminiated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhestive, nails, screws rawl plugs etc.all the edges of table top are restored by fixing ofmoulded teak wood 37x25mm beading with the help of nails, adhesive etc. complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in-charge (Top plan area of block board will be measured for payment.) |
| 4 | Providing making & fixingtable amirash shutters made of25mm thick Block board of approved ISI make and laminiated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhestive, nails, screws rawl plugs etc.edges of all these members are restored by fixing of plain/ moulded teak wood 27x10mm beading with the help of nails, adhesive etc. complete with melanmine polish for and required stainless steel fittings such as hinges, handles, tower bolts, magnets, chains & lock (Godrej make) etc. for all sizes as per drawing and the direction of Engieer-in-charges (Area of block baord will be measured horizontal & Vertical for payment.) |
| 5 | Providing making & fixingghana teak wood grade-I frame for dias with 3"x2" main battens at 60cm c/c spacing. 3"x2" cross batens of 60cm c/c spacing and 3"x3" wooden legs at every Junction incluidng antitermite treatment, cost of material and labour completed with all respect as per drawing and the direction of Engieer-in Charge. |
| 6 | Providing, making and fixing dia furniture (top and sides) by jointing, made of 25mm thick block board of approved ISI make and laminated with 1mm thick laminated sheet on one side matching with wall paneling shade and design by means of adhesive, nails, screws rawl plugs etc. edges of all these mambers are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer-in-charge (Area of block board will be measured horizontal & vertical for payment) |
| 7 | Supplying and placing of 3-seater sofa with arm fully cover superior quality PU leatherites/fabric cusion with four legs. Inner size of sofa Seat 5"6" x 21" and back 5"6" X 20". Inner structure made by chir wood frame 1"x1.5", spring fitted on frame with 1.25 mm small steel stopper, nails, four ss legs (202grade) and foaming pasted by adhesive and F-nails compressed by auto nail machine. 40 Density 4" th. foam seat, 32 density 2"th. foam back and 32 density 1"th. foam arms and zik-zek spring 1.5mm th., 12mm th.commercial ply. including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge |
| 8 | Supplying and placing of 1-seater sofa with arm fully cover superior quality PU leatherites/fabric cusion with four legs. Inner size of sofa Seat 21" x 21" and back 21" X 20". Inner structure made by chir wood frame 1"x1.5", spring fitted on frame with 1.25 mm small steel stopper, nails, four ss legs (202grade) and foaming pasted by adhesive and F-nails compressed by auto nail machine. 40 Density 4" th. foam seat, 32 density 2"th. foam back and 32 density 1"th. foam arms and zik-zek spring 1.5mm th., 12mm th.commercial ply. including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge |
| 9 | Supplying and placing of ghana teak wood grade-I wooden centre table (teak wood) 3"X2"X1"6" With 10mm th. Glass top and Melamine polish. Wooden structure are 2"X2" square legs, 3"X1.5" Top, 2"X1.5" bottm cross wooden bars and 1.5" th. Wooden strips at bottom plateform with maximum 50% opening. including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer Incharge. |
| 10 | Supplying and placing of modular office table wooden/pu 6"X4" and 2"6" height. Size make in 42mm th. Prelaminated board base top and side support and other part of table 17mm th. Prelaminated board base comleted. Covered by 2mm th. PVC as bend pasted by glue/adhesive hot melt and trimming by auto as bend machine. Both side of table 15"X42"X28" side unit with storage and computer facility, locks, handles etc including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge |
| 11 | Supplying and placing of best in class executive high back revloving office chair with neek support and superior comfort design with 40 density Pu foam with chrome finish structure, handles upside covered for pu arms rest, tilting mechanisum air gas pump for backward and foreward movement, lcoking for writing position, class three base make in iron moulded 5 Nos legs (1.5 mm th. heavy). Including cost of material and labour completed with all repect as per enclosed drawing andas per direction of Engineer Incharge |
| 12 | Supplying and placing of Computer table Size 4"X2" and height 2"6" make 17mm th. Prelaminted board base Top and one side drawer, storage and key board, CPU, PUS Stand facility atteched including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer Incharge. |
| 13 | Supplying and placing of woring table size 4"x2" and height 2"6" in iron frame 1"x1" square pipe 16 gauge, side box 3nos of drawer with lock and 17,, th. Plb top and PVC beading, spray paint on frame with habdles and locks. Incuding cost of material ad labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. |
| 14 | Supplying and placing of best in class medium back staff chair with spine support and suprior comfort design, capsule pipe frame support in bottom for flexibality and comfart in seating. Use 32 density 2" th. PU leatherites/fabric cusion back 1"66"X1"6" and seat 1"6"X1"6" with pvc arms. including cost of material and labour completed with all repect as per enclosed draing and as per direction of Engineer incharge. |
| 15 | Supplying & Placing Conference round table in completely knock down conditions with an overall size Dia. 1200mm that is to be assemble at site. The table top shall be made up of 25mm thick pre-laminated particle board of appvoed shade. The table top profile shll be in circular shape and the edges shall be sealed with 2mm thick thin strip of imperable PVC. The table shall be supported on rectangular/round ghana teak wooden structure haing corss-section area 50mm x 50mm with four legs. Including cost of material and labour completed with all repect as per enclosed drawing and the direction of Engineer-in-charge. |
| 16 | Supply of Wooden Conference Chair (Ghana Teakc wood grage-1) size 1"6"x1"6" seat and 1"6"x2"6" back.2"x2" legs and rest of structure 1.5" back wooden seat cushion foam with fabric and back wooden strip.with melamine polish. Including cost of material and labour completed with all repect as per enclosed drawing and the direction of Engineer-in-charge. |
| 17 | Supplying & Placing three seater airport sofa. The Seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2m thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin, The armrest shall be made up of mild steel powder coated tube with 1.2mm thck. The base structure shall be supported by MS powder coated with 40-60µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. the seat size shall be 440±10(D) x 405±10 mm (H) from gound. Overall height shall be = 775±10 mm, overall depth = 710±10mm & overall width = 1675±10 mm. Including cost of material and labour completed with all repect as per enclosed draing and the direction of Engineer incharge. |
| 18 | Supplying & Placing four seater airport sofa. The Seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2m thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin, The armrest shall be made up of mild steel powder coated tube with 1.2mm thck. The base structure shall be supported by MS powder coated with 40-60µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. the seat size shall be 440±10(D) x 405±10 mm (H) from gound. Overall height shall be = 775±10 mm, overall depth = 710±10mm & overall width = 2325±10 mm. Including cost of material and labour completed with all repect as per enclosed draing and the direction of Engineer incharge. |
| 19 | Supplying & placing cabinet with an overall size 750mm x 450mm x 600mm. The cabinet shall be made up of Pre-laminated particle board with approved laminate and finish as per approved shade. The top shall be made up of 25mm thick and other parts like side, back, shutter, facia, skirting shall be 18mm thick. The edges shall be sealed wit hthin strip of impermeable PVC, The storage shall be supplied with 2 nos. of shelves, Door shutters shall be provided for opening and closing the cabinet. Including cost of material and labour completed with all repect as per direction of Engineer incharge. |
| 20 | Supplying and placing of Judger chair made in Ghana Teak wood grade-1. Seating H 20" x D 21" x 24" and Bracekts H 50" x W 21" with full arms and Handle 3" and Legs 3" with wooden structure. The seat should be made of 18mm MR Grade plywood and back should be made of 12 mm plywood and frame, legs, handle should be of complete sagwan wood with Melamine Polish. The seat Cushion of the chair should be made up of 50mm thick High Density of 40+2kg, Cub, M and back cushion should be made up of 38mm thick High Density 32+2 Kg./cub.M and good quality approved valvet fabric. Including cost of material and labour completed with all repect as per direction fo Engineer incharge |
| 21 | Supplying and placing of ghana teak wood grade-I stool height 18" and stool Top L12"xW12" Approximate weight 8Kg. Top shall be made of wood and frame should be 2 inch round/square wood with High quality polish. Including cost of material and labour completed with all repect as per direction of Engineer incharge. |
| 22 | Supplying and placing of wooden side table of Size :- 4"2"3"x1"6". Table with work top shall be made of 25MM Laminated medium density fiberboard (MDF Board). Door shutters shall be provided both side for opening and closing the cabinet. The table shall be supplied with 2 nos. of shelves on both side. Handle shall be made of stainless steel provision for Foot Rest. All sides panel shoule be covered with 18mm Laminated MDF Board. All the edges are sealed with equivalent matching 2mm thick PVC. (Machine Edge Beading) beading. The base of table and racks legs fitted with plastic bush.Including cost of material and labour completed with all repect as per direction of Engineer incharge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
