Tender For Maintenance And Repair Of Tender For Civil Mr Works Of Ee Edd Barhaj Office Building District Deoria
Tender Value
5.28 Lakhs
Estimated cost
Bid Submission
15 Apr 2024
0 days left
EMD
11000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
barhaj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance And Repair Of Civil Mr Works Of Ee Edd Barhaj Office Building District Deoria
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. (CSI No. 15.01) |
| 2 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) |
| 3 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 4 | 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all materiallabour and T&P etc for proper completion of work.(CSI No. 11.06) |
| 5 | S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) |
| 6 | Water proofing Treatment of roof by using eniroof E.M.B. highly elastomeric water proofing coating two coats, Aquacrete 30% two coats, Aquaguard 50% two coats, Fibre Glass, D.I. Primer S.B.R. one coat, white cement and coarse sand including supply of all materials, labour and T&P etc. as required for proper completion of the work. (NSI) |
| 7 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07) |
| 8 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) |
| 9 | Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. (CSI No. 15.05) |
| 10 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18) |
| 11 | S/F 8mm thick white glazed Somany, Johnson etcin Flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and Tools and Plants etc. required for proper completion of the work. CSI 12.11 |
| 12 | S/F 6 mm thick white glazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and Tools and Plants etc. required for proper completion of the work. CSI 12.12 |
| 13 | Providing and fixing white glazed China earthen ware water closet squatting \" Orisa type\" pan weaper size 580mmx140mm Hindustan Make or other equivalent approved make of Ist quality with 100mm dia. White glazed P or S trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3\" thick c.c. in proportion of 12:6:1 including cost of all materials, labour(C.S.I.No. 27.01+27.23) |
| 14 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sandand cement in proportion of 4:2:1including supply of all materials,labour,side shuttering ifrequired and T&P etc. required for proper completion of work. (CSI No. 5.06) |
| 15 | Providing & fixing half turn 25mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05c) |
| 16 | Providing and fixing PVC BALL FLOAT VALVE 20 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06b) |
| 17 | Providing and fixing PVC CONNECTION PIPE, 300x15 with 2 brass uints ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No.26.09a) |
| 18 | Providing and fixing PVC Connection pipe 450x15mm with 2 Brass Units.ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.09b) |
| 19 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours T&P etc required for proper completion of work. (CSI No. 26.12) |
| 20 | P/F of CP BRASS BIB COCK 15 mm dia HEAVY QUALITY (400gm) (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16a) |
| 21 | P/F CP BRASS STOP COCK 15mm dia HEAVY QUALITY (400gm) ( L&K and equi.) (CSI No. 26.16C) |
| 22 | P/F of CP BRASS SHOWER HEAVY QUALITY (>225 gms) (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16E) |
| 23 | P/F of CP BRASS wall mixture HEAVY QUALITY (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16g) |
| 24 | P/F of CP BRASS angle valveHEAVY QUALITY (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16i) |
| 25 | P/F of CP BRASS piller cockHEAVY QUALITY (L&K and equil.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16j) |
| 26 | Providingand fixing of 110 mm dia PVC Pipe 6 kg/sq.cm for withspecial such as Tee, bend, socket, elbow etc including supply of all labour , material T&P etc. complete required for proper completion of the work. (CSI No. 26.17) |
| 27 | Providing and fixing 15 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.19) |
| 28 | Providing and fixing 20 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.20) |
| 29 | Providing and fixing 25 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.21) |
| 30 | Supply and fixing of health faucet for model no-ALD-573 as per direction of engineer in charge. This include cost of labour, materialT&P etc for proper completion of work.(CSI No. 26.30) |
| 31 | Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09) |
| 32 | Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) |
| 33 | Mild steel or iron work in heavy sizes such as trusses, built-up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work (CSI No. 9.01) |
| 34 | Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion I.E. First part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) |
| 35 | Repair to plaster in 1:6 patches including removal of old plaster racking out joints to 1 cm.(3/8\") depth,watering the area and then replastering the sameincluding supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 11.09+20.02) |
| 36 | Renewing panes of glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 4 mm thick. (CSI No. 20.04) 806b |
| 37 | Providing and fixing 25mm depth glass strips of 3.15 mm thickness in jointsof floor and skirting at the time of laying floors, flush withfloor level including supplyof all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.13) |
| 38 | Supply and replacing of L drops 16 mm dia x 300 long oxidized iron fittings including cost of nuts, bolts etc.complete.( CSI NO. 20.17a ) |
| 39 | Supply and replacing of Tower bolts 10 mm dia x 250 mm longoxidized iron fittings including cost of nuts,bolts etc.complete. ( CSI NO. 20.17b ) |
| 40 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of C.P. Teak wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. (CSI No. 8.43) |
| 41 | Painting or varnishing on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.02+13.03) |
| 42 | Supply and fixing of 32 mm thick single leaf flush door shutter (boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.54) |
| 43 | Applying Birla or equivalent putty on old surface interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.21) |
| 44 | Painting one coat with APEX or equivalent brand weather coat paint onpreviousely treated surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.23+13.24) |
| 45 | Two coatwith Acrylic emulsion paint of Berger/Asian/ICI OR equivalent paint (Paint and water in the ratio 1:1 by volume) over previousaly painted surface of cement concrete, cement plaster and bricks including supply of all materials, labour and T&P etc. required for proper completion of the work. (C.S.I.No.13.27+13.26) |
| 46 | Wiring Point for light with 1.5sq mm FRLSH PVC insulated multisrand single core copper conductor cable in heavy gauge PVC casing caping on surface complete with 14 SWG copper earth contunuity wire,GP Box, modular type switch & ceiling rose/batten holder on 3mm thick phenolic laminated backlite sheet etc completein all respects, as directed including matching colour wash P.S.I. NO. 121(C)-188(A)+187(A) |
| 47 | Wiring point for fan/fresh air fan same as above item P.S.I. No.123(C)-188(B)+187(A) |
| 48 | Wiring point forplug same as above item P.S.I. No.124(C)-188(C)+187(C) |
| 49 | Supply and fixing of LED tube light batten fitting of approved make suitable for 1x22 watt LED tubelight on surface complete in all respect (P.S.I. No. 1413(A)-CAT-AA) |
| 50 | Supplying and fixing 32A-240V IC cutout of approved make (Crompton, Anchor or equivalent) on meter board or polished teak ply board complete in all respect (P.S.I. 1112) |
| 51 | S/F ofpower plug with 15 Amp./250 volt flush type switch and 5 pin 15 amp/250 volt flush type modular socketwith 4mm copper conductor on concealed M.S. box with phenolic laminated bakelite sheet cover with supply of all material, labour T&P etc. required for proper completion of work.(P.S.I. No.1139A+211C) |
| 52 | S/wiring Sub main with 2 No. 4sq mm FRLSH PVC insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage PVC condut concealed with wall including one number 2.5 sqmm FR PVC insulated multistand copper cable as earth contuity wire drawn in conduit. (PSI 216 B) |
AI Tender Summary
Tender Timeline
Mar 16, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 15, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender