|
| 1 | Boundry wallExcavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.5 M and lead upto30M including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the E/I upto a distance of 30m from the foundation trenches including royality.PWD SOR ITEM NO. 251 (07-04-2022) |
| 2 | Concrete with 4cm guage stone ballast,course sand of 2.75 fineness modulous and cement in proportion of 8:4:1 in foundation and under floor, including supply of all material, labour and T&P etc. required for proper completion of the work.PWD SOR ITEM NO. 273 (07-04-2022) |
| 3 | RCC work with cement, approved coarse sand & 2cms guage approved crushed stone grit in proportion of 1:1½:3 in raft foundation & footing excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire and including necessary centering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of work.PWD SOR ITEM NO. 287+diff of 283 &284A. (07-04-2022) |
| 4 | Same as item no.3 but for column PWD SOR ITEM No. 289 (07-04-2022) |
| 5 | Same as item no.3 but for beamPWD SOR ITEM No.289 (07-04-2022) |
| 6 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in as over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. PWD SOR ITEM No-504 (07-04-2022) |
| 7 | M-150 brick work 1:4 cement and coarse sand mortar 9\" wall in foundation including suppply of all material labour and T&P complete.PWD SOR ITEM No. 305 (07-04-2022) |
| 8 | M-150 brick work 1:4 cement and coarse sand mortar 9\" wall in Super Structure including suppply of all material labour and T&P complete.PWD SOR ITEM NO. 305+309+310 |
| 9 | 12mm thick plaster with 1:4 ( one part cement & four parts of coarse sand of 2.75 F.M.) over brick work minimum thickness not to be less than 1 cms including supply of all material, labour, T&P etc. required for proper completion of the work PWD SOR ITEM No-584(i)) (07-04-2022) |
| 10 | Providing and laying ofWall Putty 2mm thick including supply of all material labour T&P S. PWD SOR ITEM NO. 13.26 (07-04-2022) |
| 11 | Finishing walls with Acrylic Smooth emuilsionpaint two or more coats to give an even shade including all material labour and T&P PWD SOR ITEM NO. 13.46.1 |
| 12 | Mild steel or iron work in heavy size such as gates etc inlcuidng cutting welding drilling, fixing and supply of all material labour T&PPWD SOR ITEM NO. 503 (07-04-2022) |
| 13 | Earth work in filling in ordinary soil including leveling dressing and ramming and also including cartage4.00 Km distance Including loading unloading cost of earth royalty etc. all complete as per direction of E/I Excluding royality (Suitable for Plantation)PWD SOR ITEM No.253+ cartage+ cost of earth etc |
| 14 | Plantation of Trees by MIYAWAKI METHOD: Creating site plan, Ground Clearing, Excavation of upto 1 feet and refilling with soil of 1.5 feet depth (compacted),Disposal of excavated material from CPP site, Laying irrigation pipelines, adding organic soil enhancers, planting over 30 native species as per approved list and using Miyawaki method, ensuring bamboo support for saplings, laying mulching materials, logistics and transport for daily watering of plantation, daily maintenance and watering for 3 years, ensuring maintenance of water tanks and pipelines, de-weeding on quarterly basis, preparing Monitoring Reports, submitting Monitoring Reports (Approx area - 3298.00Sqm)Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, Indian Mahogany (Swietania Mahogani) Ashoka Tree (Saraca Asoca), Gulmohar Tree (Delonix Regia), Curry Tree (Murraya Koenigii), Peepal Tree (Ficus Religiosa)Banyan Tree (Ficus Benghalensis), Arjuna Tree (Terminalia Arjuna), Neem Tree (Azadirachta Indica), Karanj (Pongamia glabra), Lagerstroemia speciosa, Jamun (Syzygium cumini)Mango - Mangifera indica, Imli - Tamarandus indica, Khirni - Manilkara hexandra, Bael Patra - Aegle Marmelos, Amaltas - Cassia fistula, Jacaranda - Jacaranda mimosifolia, Tichoma gorichori -, Champa - Magnolia champaca, Kadamb - Anthocephalus kadamba, Acacia auriculiformis - Acacia, Bauhinia blakeana, Cassia siamea, Dalbergia sissoo - seesam, Grevillea robusta (Silver Oak), Jacaranda mimosifolia, Mimusops elengi (Maulsri), Pongamia glabra (Papri), Caesalpinia pulcherrima, Harshingar - Nyctanthes arbor-tristis, Bougainvillea - Hibiscus - Hibiscus syriacus Kaner - Nerium oleander. |
| 15 | IRRIGATION SYSTEMDRIP IRRIGATION SYSTEM FOR PLANTATION - ASYSTEM HEAD UNITSNAD FILTER + BACKWASH ASSLY 2.5\" |
| 16 | SCREEN FILTER 2.5\" |
| 17 | ASSLY FOR FILTER 2.5\" |
| 18 | PRESSURE GAUGE + STOP COCK |
| 19 | PRV |
| 20 | NRV |
| 21 | NETWORK- FINOLEX HDPE & PVC PIPESHDPE PIPE 75 MM PN4 (TANK TO PLOT) |
| 22 | PVC PIPE 75 MM 4KG/CM2 |
| 23 | PVC PIPE 63 MM 4KG/CM2 |
| 24 | EMITTING SYSTEMFINOGOL PLAIN LATERAL 16 MM |
| 25 | DRIPPER 8 LPH |
| 26 | START TO END SET FOR DRIP LINE 16 MM |
| 27 | BARBED COUPLER 16 MM |
| 28 | TEE 16 MM |
| 29 | ELBOW 16 MM |
| 30 | ELBOW 16 MM |
| 31 | BALL VALVE 63 MM |
| 32 | FLUSH VALVE 63 MM |
| 33 | VALVE BOX 12\" |
| 34 | FITTINGS & ACCESSORIES |
| 35 | INSTALLATION CHARGES |
| 36 | Pump: Crompton Greaves 10.00 Hp pumpwith necessary accessories.(Market Rate) |
| 37 | Supply, placing and hosting on terrace at all floor levels polyethylene seamless water Storage Tank ISI 12701 mark with cover and suitable locking arrangement and making necessary holes for Inlet, outlet and over flow pipe but without fitting and base support for tank. pwd |
| 38 | Water tank platform& ShedExcavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)P.W.D. 251 |
| 39 | Providing dry / trap /granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 40 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairingstrength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the followinggrades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement contentin design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M15 grade with minimum cementcontent of 240 kg /cumD.S.R. 4.20.1.2 |
| 41 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairingstrength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the followinggrades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement contentin design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M15 grade with minimum cementcontent of 240 kg /cumD.S.R.4.20.1.3 |
| 42 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. P.W.D. 504 |
| 43 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)D.S.R. 7.1.1 |
| 44 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)D.S.R. 7.2.1 |
| 45 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :13.33.1 Flush/ Ruled pointing sqm |
| 46 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.P.W.D 503SHS 60x60x3 Column (5.34Kg/mtr)ISA 40X40X3 (1.83 Kg/mtr)Cleat ( 35X35X3)Base Plate ( 200x200x6)(7850 Kg/Cum)Top Plate ( 200x200x6)Top Plate ( 200x200x6) |
| 47 | G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet |
| 48 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect.P.W.D.SOR Electrical 2018 ITEM No.1421 |
| 49 | Supply & fixing steel tubular pole 7 Metre long designated 410 SP-1 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.P.W.D.SOR Electrical 2018 ITEM No.602 |
| 50 | Supply and fixing of 6 Amp to 32 Amp DP MCB (10KA) (C curve) for polesP.W.D.SOR Electrical 2018 ITEM No.1009 |
| 51 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch mtring instrument & instrument box with CTs etc. in case of TPN complete in all respect.25 Amp SPNP.W.D. SOR Electrical 2018 ITEM No. 807 (b) |
| 52 | Supply and fixing of Bakelite sheet 3 mm thick of suitable size & connectorN.S (P.S.) |
| 53 | SUBHEAD V-CABLESSupply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, themake:Schneider/RR Kabel/Northwest 120 sqmm3.5 corePWD SOR Electrical 2018 ITEM No. 501(o) |
| 54 | 50 sqmm3.5 corePWD SOR Electrical 2018 ITEM No.501(l) |
| 55 | 35 sqmm3.5 corePWD SOR Electrical 2018 ITEM No.501(k) |
| 56 | 25 sqmm3.5 core PWD SOR Electrical 2018 ITEM No.501(j) |
| 57 | 10 sqmm4 core PWD SOR Electrical 2018 ITEM No.501(h) |
| 58 | 10 sqmm2 corePWD SOR Electrical 2018 ITEM No. 501(b) |
| 59 | 6 sqmm2 corePWD SOR Electrical 2018 ITEM No. 501(a) |
| 60 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per diremake:Schneider/RR Kabel/Northwest 120 sqmm3.5 corePWD SOR Electrical 2018 ITEM No. 503(o) |
| 61 | 50 sqmm3.5 core PWD SOR Electrical 2018 ITEM No.503(l) |
| 62 | 35 sqmm3.5 corePWD SOR Electrical 2018 ITEM No. 503(k) |
| 63 | 25 sqmm3.5 corePWD SOR Electrical 2018 ITEM No.503(j) |
| 64 | 10 sqmm4 corePWD SOR Electrical 2018 ITEM No.503(h) |
| 65 | 10 sqmm2 core PWD SOR Electrical 2018 ITEM No.503(b) |
| 66 | 6 sqmm2 core PWD SOR Electrical 2018 ITEM No. 503(a) |
| 67 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.make:Schneider/RR Kabel/Northwest 120 sqmm PWD SOR Electrical 2018 ITEM No. . 504(j) |
| 68 | 70 sqmm PWD SOR Electrical 2018 ITEM No.504(h) |
| 69 | 50 sqmmPWD SOR Electrical 2018 ITEM No.504(g) |
| 70 | 35 sqmm PWD SOR Electrical 2018 ITEM No.504(f) |
| 71 | 25 sqmm PWD SOR Electrical 2018 ITEM No.504(e) |
| 72 | 16 sqmm PWD SOR Electrical 2018 ITEM No.504(d) |
| 73 | 10 sqmm PWD SOR Electrical 2018 ITEM No.504(c) |
| 74 | 6 sqmm PWD SOR Electrical 2018 ITEM No.504(b) |
| 75 | SUBHEAD IV-MAINL. T. PANELS LT PANEL & FEEDER PILLARSupply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection.The panel sheet structure shall undergo seven tank pre-treatment process before painting.The sheet steel shall be all of 2.0mm thick CRCA sheet.All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections.All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable.Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters.Proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions.A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel.Panel shall be so designed at to have minimum 20% spare feeders/space.Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement.All cable terminations shall be from top.The complete panel shall be fuse less type, for control circuits 2A/6A MCB\"s to be used.All bus bars shall be of aluminium, electrolytic grade only.Maximum design density shall not exceed 1 Amps/Sqmm.All bus bars shall be insulated with coloured heat shrinkable PVC sleeved.All bus bar supports shall be non hygroscopic DMC/SMC supports. L.T. PANELSSupply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection.The panel sheet structure shall undergo seven tank pre-treatment process before painting.The sheet steel shall be all of 2.0mm thick CRCA sheet.All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections.All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable.Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters.Proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions.A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel.Panel shall be so designed at to have minimum 20% spare feeders/space.Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement.All cable terminations shall be from top.The complete panel shall be fuse less type, for control circuits 2A/6A MCB\"s to be used.All bus bars shall be of aluminium, electrolytic grade only.Maximum design density shall not exceed 1 Amps/Sqmm.All bus bars shall be insulated with coloured heat shrinkable PVC sleeved.All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm, Main LT Panelmake:Schneider/RR Kabel/Northwest Incoming : One (1) No 200 Amp. 4P MCCB of 50KABreaking capacity mtring :1 Set of CT\"s one of 200/ 5Amp ratio for Multifunction mtr1 Set of CT\"s one of 200/ 5Amp ratio 50/51, 1 Set of CT\"s one of 200/ 5Amp ratio for APFC relay. One (1) Set of Phase Indication Lamp. One (1) Set of B+C Type SPD Bus Bar :One (1) No.300 Amp.TPN aluminimum bus bar of suitable length.50KA, Outgoing Phase indication lamps on nos outgoing to be provided. 02 No.125 Amp 4PMCCB. (25 KA) 01 No.100 Amp 4PMCCB. (25 KA) 03 No.63 Amp 4PMCCB. (25 KA) 04 No.10 Amp DPMCCB. (10 KA) Panel described as abovenN.S |
| 76 | CAPACITOR PANEL-30 KVARSITC APFC Panel of 30 KVAR capacity suitable for operation on 415 + 5% Volt, 3 Phase, 50Hz, AC supply, having MPP type, resin bounded, static5 KVAR capacitors (without oil) in tier formationcomplete with following TPN MCCBas incomer of the panel, 6 step microprocessor based power factor controller relay capable to select the rating from 1 KVAR to multiples thereon up to max rating of the panel, current limiting contactors for nos capacitors protected with MCBs, Ammtr (Analogue type) with CTs, Voltmtr (Analogue type) selector switches indicating lights, cooling fans for panel, earthing the panel with 2 Nos. 25mm x 5mm thick GI steel flat from existing earth bar, connection of APFC panel with suitable size 3.5 core aluminium conductor armoured XLPE cable from main LT panel (maximum length of cable 10 mtrs.) and compression glands etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part automatically as and when requried. Capacity of Static capacitors should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with 1.6mm thick CRCA sheet duly powder coated.Incomingmake:Schneider/RR Kabel/Northwest One (1) No 63 Amp. 4P MCCB of 25 KABreaking capacity BUS BAR1 Set of 100 Amps TPN Aluminium Bus Bars OUT GOING 07 No. 16 Amps. TP MCCB (25 KA)Panel described as aboveN.S |
| 77 | SUBHEAD IV-MISCELLANEOUSProviding, Laying and Fixing following Dia RCC Pipe NP 2 Class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 ( 1 Cement : 2 fine sand)including trenching ( 75 cm) deep and refilling etc. as required.100mm dia DSR -2018 E/M Item No. 14.14.1 |
| 78 | Making of following size of Cable Chamber made of 230 mm thick brick work in cement mortar (1 cement : 6 sand) with PCC 100 mm thick PCC base plastering of inner and outer surface with cement mortar including providing of Heavy Duty C.I Cover complete with digging, refilling and removal of surplus soil complete as required.900 mm x 900 mmx 1000 mm deepN.S |
| 79 | SUBHEAD VIII- SAFETY EQUIPMENTSProvidingandfixingMV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. DSR -2018 E/M Item No. 2.21 |
| 80 | ProvidingandfixingHT danger notice plate 250 mm x 200 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required.DSR -2018 E/M Item No. 2.22 |
| 81 | Supplying andFixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.PWD SOR ELECTRICAL 2018 ITEM NO. 1133 |
| 82 | Supplying & Layingof 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality PWD SOR ELECTRICAL 2018 ITEM NO. 1136 |
| 83 | Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE RulesPWD SOR ELECTRICAL 2018 ITEM NO. 1109 |
| 84 | S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & Pfor proper completion of work.PWD SOR ELECTRICAL 2018 ITEM NO. 1134 |
| 85 | ELECTRICAL WORKSSCHEDULE ITEMS (AS PER PWD SCHE. 2018/DSR 2018/2019)NON - SCHEDULED ITEMS (AS PER MARKET RATES )SUBHEAD I- WIRINGPOINTS Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core Copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 138© |
| 86 | Same as item No. (1) but for fanandlight duty exhaust fan. make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 140© |
| 87 | Same as item No.(1) but for5amp plug point with piano type switch and socket etc.make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 141© |
| 88 | SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANSErection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. Bajaj PhilipsPWD SOR ELECTRICAL 2018 ITEM NO. 1116 |
| 89 | Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed.Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.PWD SOR ELECTRICAL 2018 ITEM NO. 1149 |
| 90 | Supplyfixingofelectronic fan regulator(Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.make:Bajaj/ PhilipsPWD SOR ELECTRICAL 2018 ITEM NO. 1203 (C) |
| 91 | Supply & fixing of LED Tube Light with Metal heavy dutyBox type batten Light fitting 1 x 22 watt suitable for up to 1 x 22 watt LED Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.(CAT: AAA)make:Bajaj/PhilipsPWD SOR ELECTRICAL 2018 ITEM NO. 1413 |
| 92 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required Make : Bajaj/PhilipsDSR 2019 BLDC 1 |
| 93 | SUBHEAD III-DISTRIBUTION BOARDSupply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.(CAT A) make:Schneider/RR Kabel/Northwest 8 Way SPN 1024 (A) |
| 94 | Supply and fixing of 6Amp to 32 Amp (10 KA)SP MCB in existing MCB, DB complete with connections as required. (CAT: A)make:Schneider/RR Kabel/Northwest 1002 |
| 95 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C.make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 1307© |
| 96 | Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 221© |
| 97 | Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 222© |
| 98 | Supply and wiring of submain 2 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 223© |
| 99 | Supply and wiring of submain 2 number 16 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 224© |
| 100 | Supplyfixingand concealing of20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work( forTelephone) make:Schneider/RR Kabel/Northwest PWD SOR ELECTRICAL 2018 ITEM NO. 148(A) |
