Construction Of 01(One) No. Tts Barrack Size (40’ X 20’), Half Wall, G.C.I Sheet Walling & Roofing, With 4’ Front Verandah At Raishyabari Under Dhalai District. (Barrack No. I)
Tender Value
9.26 Lakhs
Estimated cost
Bid Submission
02 Apr 2024
0 days left
EMD
9268
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gandacherra → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 01 ( One ) No. Tts Barrack Size ( 40’ X 20’ ) , Half Wall, G.C.I Sheet Walling & Roofing, With 4’ Front Verandah At Raishyabari Under Dhalai District. ( Barrack No. I )
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Mar-2024 | Work title, Description and Location Change | Other | 02-Apr-2024 |
| 2 | 16-Mar-2024 | Work title ,Description and Location Change | Other | 02-Apr-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed. (All kinds of soil) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil) |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (find) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level. |
| 5 | 1:2:4 (1 Cement : 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 6 | 1:2:8 (1 Cement : 2 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (All kinds of soil) |
| 8 | Centering shuttering including strutting, propping etc and removal of form work for. Columns, Plillars, Piers, Posts and Struts with wooden plank. |
| 9 | First class brick work in foundation and plinth including cost of all materials as required complete:- (1) In cement mortar 1:4 (1 cement : 4 fine sand) |
| 10 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete-a) in cement mortar 1:4 ( 1 cement : 4 fine sand) |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete a Hot finished welded type tubes. |
| 12 | Providing and fixing muli bamboo champakampa tarja ( 75 mm wide) ceiling strengthening with single split bamboo battens ( both side) at 300 mm centre to centre and tied with G.I. wire1.0 mm complete (over required beams or fixed with a frame of suitable type, which will be paid separately) as per specification. |
| 13 | Providing corrugated GS sheet roofing including vertical/curved surface fixed with Zink coated high quality Hex flanged self drilling screw (size 12 x 55 mm) by drill machine but excluding cost purlins, rafters and trusses in/c. cutting to the size and shape wherever required complete as per direction of Engineer- in –charge a) 0.63 mm GS sheet thick with Zink coating not less than 275 gm/sqm |
| 14 | Providing ridge or hips of width 45 cm (Tata shakti/jindal) fixed with Zink coated high quality Hex flanged self drilling screw (size 12 x 55 mm) by drill machine in/c. washer complete as per direction of Engineer- in-charge) 0.35 mm thick with Zink coating not less than 275 gm /sqm. |
| 15 | Steel work welded in built up section/framed work including cutting, hoisting, in position and applying a priming coat of approved steel primer using steel etc. complete as required-i)in grating, guard bar, ralling, brackets, gates and similar works, all complete |
| 16 | 12 mm cement plaster of mix (1) in cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 17 | 12 mm cement plaster of mix in/c. net cement punning a ) in cement mortar 1 : 4 (1 cement : 4 fine sand) |
| 18 | Distempering with 1st quality acrylic distemper ( ready mixed) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade (Payment shall be made after submission of Test Certificate issued by the Manufacturer ) :New work (two or more coats) over and including water thinkable priming coat with cement primer. |
| 19 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture (payment shall be made after submission of Test Certificate issued by the manufacture):New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 20 | Painting with syntheticenamelpaint of approved brand and manufacture of required colour to give an even shade (payment shall be made after submission of Test Certificate issued by the Manufacturer) Two or more coats on new work over an under coat of suitable shade e with ordinary paint (primer) of approved brand and manufacture. |
| 21 | Providing and laying flat brick flooring in cement mortar including cement slurry etc. complete A) in cement mortar 1 : 4 (1 cement : 4 fine sand) |
AI Tender Summary
Tender Timeline
Mar 16, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 02, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 02, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender