Delhi Jal Board-DJB has published Providing And Fixing Of Ms Sluice Gate Outside Patterson Filter House At Waste Water Line /Drain Channel At Chandrawal Ww-Ii. Submission Date for this Tender is 20-03-2024. Dam Gate Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Breaking of RCC structure in the outlet chamber in Chandrawal Water Works No.II out the filter house near weighing bridge at the depth of approximate 30 feet (10 metre) depth from the top level & taking out all Malba from the site to outside by manual labour to outside of chamber |
2 | Dewatering of complete line by making temporary installation of pump set with electrical connection of panel & delivery pipe for drain of water outside of chamber. This includes the hiring charges of sump pump 10 HP & cable + panel. |
3 | Smoothness of surface of outlet chamber with plastering of wall below the level of 30 feet from top level. |
4 | The M.S. plate of size 920 mm x 3000 mm x 25 mm thick with side support of 75 mm x 3000 mm x 25 mm thick – 2 Nos. on both side of M.S. Plate duly drilled & fixed by anchor bolt with wall & also filling of civil plaster to arrest any type of leakage from the M.S. Plate side. |
5 | Making M.S. Block of size 80 x 80 x 2000 mm long with proper slot of size 27 mm up-to the depth of 25 mm-30 mm for guide of M.S. Flap sheet to move up and down by smooth polishing etc. as required. |
6 | Making the M.S. Flap of size 900 x 3000 x 25 mm thick with proper making smooth on each side with proper levelling etc. as required & also machining of 4 side corners with proper sq. size with 900. |
7 | Making S.S. Shaft at 50 mm dia 10 metre long duly machined threading & also fixing with nut bolt at M.S. Plate & also fixed by 3 Nos.coupler with threading up the length of 1800 mm long. |
8 | G.M. Nut as per site required. |
9 | M.S. Pedestal with 8’’ dia M.S. pipe & taper etc. with bottom fixed on M.S. Platform. |
10 | M.S. Block with G.M. nut thrust bearing, duly machining for drive of spindle to move up & down and also making a spindle for rotation of spindle up & down. |
11 | Fixing of complete M.S. Sluice gate by moving crane at the bottom of 8 metre depth with proper safety arrangement with moving crane & also fixing of guide etc. as required & fixing of S.S. Spindle with guide & guide block. |
12 | Test & Trail run of Sluice Gate complete set. |
13 | Making a platform with fixing of I-Section beam of size 10’’ x 4 ‘’ with M.S. Plate fixing the proper levelling & M.S. Chequered Plate with proper support etc. as required. Painting of complete platform by primer & black enamel paint with railing etc. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail