Tender For Carriage And Assembling Of Ppgi Sheet (16 Rooms Of Size 3.45 M X 3.45 M), Sadhu Shed( 01 Room) And Rfid Shed( 01 Room) Before Yatra And Dismantling And Safe Storage After Yatra At Holy Cave And Lower Holy Cave., jammu-Jammu And Kashmir

Carriage And Assembling Of Ppgi Sheet ( 16 Rooms Of Size 3.45 M X 3.45 M ) , Sadhu Shed ( 01 Room ) And Rfid Shed ( 01 Room ) Before Yatra And Dismantling And Safe Storage After Yatra At Holy Cave And Lower Holy Cave.- 1 Assembling Of Pre-Fab Ppgi Sheet Panels With Repair To Doors, Windows Etc Complete With Ms Tube 50X25x3 Mm And Ppgi Sheet 1 Mm Thick With Proper Nuts & Bolts Including Repairs By Welding Etc Complete & Cost Of Carriage From Sasb Store To Erection Site Before Commencement Of Yatra. 2 Providing And Fixing Pre Coated Galvanized Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Srfaces, Excluding The Cost Of P / -Urlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 3 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Weldingand Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 4 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded 5 Engagement Of Labour For Making Table With Materials Available In Store. 6 Carpenter Ist Class1 No. For 02 Days = 02 Days 7 Helper1 No. For 02 Days = 02 Days 8 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 9 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe With Manually Controlled Device ( Handle Lever ) , Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. 10 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To European Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. 11 Providing And Fixing Unplasticized Pvc Connection Pipe With Brass Unions 45 Cm Length 15 Mm Nominal Bore 12 Providing And Fixing Wash Basin With C.I. Brackets, 15Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : White Vitreous China Flat Back Wash Basin Size 450X300 Mm With Single 15 Mm C.P. Brass Pillar Tap 13 Providing And Fixing White Vitreous China Pedestal For Wash Basin Completely Recessed At The Back For The Reception Of Pipes And Fittings 14 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete Flexible Pipe 32 Mm Dia 15 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 16 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Make Conforming To Is : 8931 17 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. 100 Mm Nominal Dia 18 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With / C.P. Brass Screws And Washers Complete. 19 Providing And Fixing Of Designer Matting & Thermocol Of Approved Brand & Manufacture Including Carriage Etc 20 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories0.50 Mm ( +0.05 % ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete : Ridges Plain ( 500 - 600Mm ) 21 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 22 Providing And Laying Damp-Proofcourse 50 Mm Thick ( Dpc ) With Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete. 23 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) 24 Dismantling Of Ppgi Sheet Panels Including Proper Stacking Of Material At Appropriate Designated Site As Per Direction Of Engineer-In-Charge. 25 Carriage Of Material By Mt From Ganderbal To Dumail 26 Carriage Of Material By Head Load From Dumail To Holy Cave 27 Carriage Of Sand And Bajri By Head Lead For An Avg. Lead Of5 Kms .

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	19-Mar-2024	Corrigendum	Other	22-03-2024
2	22-Mar-2024	Date Extension	Date	25-03-2024
3	25-Mar-2024	Extension	Date	29-03-2024
4	28-Mar-2024	CR	Other	29-03-2024

INR 800 /-

INR 13640.0 /-

INR 6.82 Lakhs /-