|
| 1 | Earth work in excavation in foundation trenches in ordinary soil(Vide classification of soil item-A) and disposal of excaveted earth as obtained to a distance upto 50M including all lifts levelling,ramming the foundation trenches, removing roots of trees,shrubs all complete as per approved design,building specification and direction of E/I./Incharge |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l. |
| 4 | Providing designation 75B one brick flatsoildingjoints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plingth level: 1:2:4(1 cement: 2 course sand(zone-III):4 graded stone aggregate 20mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plingth level: 1:1.5:3(1 cement: 1.5 course sand(zone-III):3 graded stone aggregate 20mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plingth level |
| 8 | Providing designation 75A Brick work in CM (1:6) in Foundation and plingth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints costs of screening, matrials scaffoling, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/l. |
| 9 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4(1 cement: 2 coarse sand (zone-III):4 gradede stone aggregate 20mm nominal size) |
| 10 | Providing designation 100 A brick work with fly ash lime brick(FLAG) confirming to IS 12894 - 1990 ( 9\" x 4.5\" x 3\" ) in C.M. (1:3) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slop 15olanding, baloconies, shelves, chajjas, lintel,band, plai widowssills,staircase and spairal stair case above plinth level upto floor five level excluding the cost of centering,shutterig,finishing and reiforcemet,with 1:1.5:3( 1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate of 20 mm nominal size) |
| 12 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar(1:3) and jointed with grey cement slurry fluse pointing with white cement including rubbing, polishing andcost of curing,taxes and royalty all complete as per building specification and direction of E/I with \"A\" grade white 15X15cm tiles |
| 13 | Providing and laying rectified vitrified floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), @ 3.3 kg/sqmincluding grouting the joints with white cement and matching pigments etc., complete. |
| 14 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I |
| 15 | Providing 6mm cement plaster (1:4) in ceilling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I |
| 16 | ROVIDING AND APPLYING WHITE CEMENT BASED PUTTY OF AVARAGE THICKNESS 1 MM, OF APPROVED BRAND AND MANUFACTURER OVER THE PLASTERED WALL SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH COMPLETE |
| 17 | Finishing walls with premium Acrylic smooth exterior paint with silicone addivites of required shades:new work (two or more coats [email protected]/10sqm over and including priming coat of exterior primer [email protected]/10sqm) |
| 18 | Proving two coats of oil bound distemper of approved shade and make over old surface including washing cleaning and papering the walls,scaffolding,washing of floors and taxes all complete as per building specification and direction E/I |
| 19 | Providing primer one coats of red lead paint of approved over new steel surface includingpreparing the plastered surface smooth with sand paper, soaping, curring and taxes all complete as per building specification and direction of E/l. |
| 20 | Providing two coats of painting with ready mix paint of approved shade and make over new surface includingwashing, cleaning and preparring the walls,scafolding washing of floor and taxes all complete as per building specification and direction of E/l. |
| 21 | SUPPLYING, FITTING AND FIXING 20 GAUGE G.C.I SHEET GATE FITTED ON M.S ANGLE FRAME OF SIZE 60 X 60 X 6 MM. ICLUDING COST OF FABRICATION, PROVIDING NECESSARY LOCKING ARRANGEMENT WITH HASKAL AND DOMNY DULY FIXED IN P.C.C (1:2:4) BLOCKS OF REQUIRED SIZE, APPLYING PRIMING RED LEAD PAINT OVER STEEL WORK, TAXES ALL COMPLETE AS PER DRAWING SPECIFICATION AND DIRECTION OF E/I |
| 22 | Providing and fixing aluminium work for doors, windows,ventilators and partition with extruded build up standard tubular section/appropriate Z section amd other section of approved make conforming to IS:733 and IS:1285, fixingh with dash fasteners of required dia and size, including necessary filling up the gaps at junction, i.e at top,botto and sides with required EPDM rubber / neoprene gasket etc.Aluminium section shall be smooth ,rust free straight,mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing/paneling,C.P brass/stainless steel screws,all complete as per architectural drawing and direction of E/I |
| 23 | Proving and fixing 12mm thick prelaminated particles board flat with decorative lamination on both sides.pressed three layer or graded wood particle board conforming to IS:12823 Grade I type II, in panelling fixed in aluminium doors,windows shutter and partition frames with C.P brass/stainless screw etc.complete as per architectural drawing and direction of E/I |
| 24 | Providing and fixinf glazing in aluminium doors, windows,ventilator shutters and partition etc.wth EPDM rubber/neoprene gasket etc. complete as per architectural drawing and direction of E/I with float glass panes of 5mm thickness (weight not less than 12.50kg/sqm) |
| 25 | Supplying,fitting and fixing M.S.grill made of 20X6mm M.S flate as per approved design and drawing,properly fabricated with joints continouus fillet welded and finishing smooth, carriage of grill work site,hoisting as per building specification and direction of E/I |
| 26 | Making plinth protection 50mmthick of cement concrete1:3:6 over 75mm thick bed of dry brick ballast 40mmnominal size, well rammed and consolidatedand grouted with fine sand, including necessary excavation , levelling,dressing and finishing the top smooth |
| 27 | Providing 150 mm wide brick drain in cement mortar (1:6)with av. 150 clear depth and 125mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flate soling in proper grade and slope at the base the drain duly plasterd in C.M (1:3)with punning surface all complete as per building specification and direction of E/I |
| 28 | Providing T.M.T steel reinforcement 8mm dia rods to 12mm dia as per approved design and drawing excluding carriage of rods (straight or in coils) to work site, cutting, bending, bending with anealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification. |
| 29 | Centering and shuttering including strutting,propping etc. and removal of form for suspended floor,roofs,landing , balconies and access platform |
| 30 | Earth work in excavation in foundation trenches in ordinary soil(Vide classification of soil item-A) and disposal of excaveted earth as obtained to a distance upto 50M including all lifts levelling,ramming the foundation trenches, removing roots of trees,shrubs all complete as per approved design,building specification and direction of E/I./Incharge |
| 31 | Extra for earthwork in hard soil as per specification and direction of E/I |
| 32 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l. |
| 33 | Providing designation 75B one brick flatsoildingjoints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plingth level: 1:1.5:3(1 cement: 1.5 course sand(zone-III):3 graded stone aggregate 20mm nominal size) |
| 35 | Providing designation 75A Brick work in CM (1:6) in Foundation and plingth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints costs of screening, matrials scaffoling, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/l. |
| 36 | Reinforced cement concrete work in beams, suspended floors, roofs having slop 15o landing, baloconies, shelves, chajjas, lintel,band, plai widowssills,staircase and spairal stair case above plinth level upto floor five level excluding the cost of centering,shutterig,finishing and reiforcemet,with 1:1.5:3( 1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate of 20 mm nominal size) |
| 37 | Centering and shuttering including strutting,propping etc. and removal of form for suspended floor,roofs,landing , balconies and access platform |
| 38 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound as per building specification and direction of E/I |
| 39 | Providing 1.5 mm cement punning including curing,carriage of water with all leads and liftsas per building specification and direction of E/I |
| 40 | Providing 50mm thick 2nd class patent stone floring (1:2:4) with stone chips in two layers bottum layer 19mm thick (1:2:4) with 12mm to 6mm size graded stone chips and top layer 6mm, thick (1:2) with 6mm down stone chips in panels with carborandum stone taxes and royalty with all complete as per building specification and direction of E/l. |
| 41 | Providing T.M.T steel reinforcement 8mm dia rods to 12mm dia as per approved design and drawing excluding carriage of rods (straight or in coils) to work site, cutting, bending, bending with anealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification. |
| 42 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with bricks and S.W drain pipe 100mm diameter,1.8m long complete as per standard design. With coomon burnt clay F.P.S. bricks of class designation 75B |
| 43 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parryware/Hindustan or any other ISI approved make with 100mm H.C.I. or P trap -do- -do- all complete job. |
| 44 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parryware/Hindustan or any other ISI approved make with 100mm H.C.I. or P trap -do- -do- all complete job. |
| 45 | Bib cock |
| 46 | Angular stop cock |
| 47 | Pressure adjustable shower |
| 48 | Soap dish |
| 49 | 100mm dia steel jali |
| 50 | 40mm dia wast pipe 750mm long |
| 51 | Proving and fixing 110mm dia PVC RWD pipe all complete job as per direction of E/I (for sewerage line) |
| 52 | 15mm dia |
| 53 | 20mm dia |
| 54 | 25mm dia |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 56 | Supply 2HP submersible pump set confirming IS 8034 and motor confirming IS 9283. with copmlete jobs as per direction of E/I |
| 57 | Supply 3 core PVC insulated, PVC sheathed conductor flat submersiblecable 3 core 4.0 sqmm inside the bore well |
| 58 | Panel board to bore well |
| 59 | Carriage of materialsSand |
| 60 | Stone chips |
| 61 | Steel/metal |
| 62 | Brick |
| 63 | G.S.T @ 18% |
| 64 | Labour Cess 1% |
