Construction Of Community Centre At Village Khadiasole Self-Rehabilitation Colony.
Tender Value
25.23 Lakhs
Estimated cost
Bid Submission
28 Mar 2024
0 days left
EMD
25300
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
suliapada → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Centre At Village Khadiasole Self-Rehabilitation Colony.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in foundation in hard or gravelly soil within 50m initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department. |
| 2 | Filling in Foundation and Plinth with sand well watered and rammed including cost, conveyance and royalty charges. |
| 3 | M15A40 Cement Concrete (1:2:4) using 40mm & down graded stone aggregates |
| 4 | RCC work in M25 grade concrete (1:1 :2) with 20mm down grade CBHG chips including cost of centering and shuttering charges, labour and cost, conveyance and royalty of materials etc. complete but excluding cost and labour charges of MS reinforcement in Column base. |
| 5 | RCC work in M25 grade concrete (1:1 :2) with 20mm down grade CBHG chips including cost of centering and shuttering charges, labour and cost, conveyance and royalty of materials etc. complete but excluding cost and labour charges of MS reinforcement in Column and Beams etc. |
| 6 | RCC work in M25 grade concrete (1:1 :2) with 20mm down grade CBHG chips including cost of centering and shuttering charges, labour and cost, conveyance and royalty of materials etc. complete but excluding cost and labour charges of MS reinforcement in Lintel. |
| 7 | RCC work in M25 grade concrete (1:1 :2) with 20mm down grade CBHG chips including cost of centering and shuttering charges, labour and cost, conveyance and royalty of materials etc. complete but excluding cost and labour charges of MS reinforcement in Chajja. |
| 8 | RCC work in M25 grade concrete (1:1 :2) with 20mm down grade CBHG chips including cost of centering and shuttering charges, labour and cost, conveyance and royalty of materials etc. complete but excluding cost and labour charges of MS reinforcement in Roof Slab. |
| 9 | Providing, cutting, bending, binding of MS reinforcementand placing in position including cost of steel, binding wire, T&P and labour etc. complete. |
| 10 | Brickwork in Foundation and Plinth with Flyash Bricks of size 25cm x 12cm x 8cm in CM (1:6) having crushing strength not less than to 75kg/cm2including cost, conveyance of all materials and labour charges. |
| 11 | Brickwork in Superstructurewith Flyash Bricks of size 25cm x 12cm x 8cm in CM (1:6) having crushing strength not less than to 75kg/cm2including cost, conveyance of all materials and labour charges. |
| 12 | 12mm thick CP (1:6) over outside smoothsurface of brickworkincluding cost, conveyance of all materials and labour charges. |
| 13 | 16mm thick CP (1:6) over inside rough surface of brickwork including cost, conveyance of all materials and labour charges. . |
| 14 | 12mm thick Cement Plaster ( 1:4 ) with neat cement punning including cost, conveyance of all materials and labour charges. |
| 15 | 6mm thick CP (1:4) over RCC works for ceiling plaster including cost, carriage of all materials and labour charges. |
| 16 | 20mm thick CP (1:4) as graded plaster over roof slab including cost, conveyance of materials and labour charges. |
| 17 | Fixing of Tilesin Dados, skirting\"s and rises of steps on 12mm thick bed of cement plaster (1:3) joined with cement slurry including cost of tiles. |
| 18 | Fixing of Vitrified Tiles in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles includingrubbing and polishing including cost of tiles. |
| 19 | Supplying and fixing MS Door and Windows including cost, conveyance & excluding GST etc. complete. |
| 20 | Finishing walls withtwo coats of water proofing cement paint of approved shade including cost of cement paint. |
| 21 | Priming one coat with any approved primer over door and windowincluding cost of primer. |
| 22 | Painting two coats with synthetic enamel paintto new MS work including cost of paints etc.complete. |
| 23 | Fitting and fixing of 1no Orissa Pan 500 x 650 mm pan , 100mm dia P trap, PVC sewerage pipe. Vent pipe and making of one manhole including under ground placing of PVC sewerage pipe etc complete in all respect as per the instruction of engineer in charge. |
| 24 | Collecting Supplying & stacking good quality moorumat work site excluding cost and conveyance of moorum. . |
| 25 | Labour for spreading moorum excluding cost and conveyance of moorum. |
| 26 | Providing and supplying 5\" pvc pipe (Hari plast) thread type 15pc ,5\" cone 1 no ,Gravel 5 peti,and mud powder 4 bags including 5\" drilling 75mt depth, filter cutting, washing with compressor4 hrs including transportation of all materials and machines etc complete as per the direction of Engineering in charge. |
| 27 | Providing and supplyingHand pump 1 no.,11/4\" pipe 6 nos , Rod 6nos. Cylinder , Felenger rod 1no.Nipple, Elbowwith all other fittings including ,transportation and labour charges etc complete asper the direction of Engineering in charge. |
| 28 | Providing and supplying12mm Polythene Pipe 25mm Polythene Pipe, 125mm far Round box with 175mm micca cover, 150mm x 100mm GI Box with 175mm x 125mm micca cover, 250mm x 100mm GI Box with 275mm x 125mm micca cover, 200mm x 250mm GI Box with 225mm x 275mm micca cover, 4way MCB Box (M), 10amp MCB (Havels), 32amp Main Switch (Anchor), Angel Holder (Anchor),Cilling Rose (Anchor), 6amp Switch (Anchor), 6amp Switch (Anchor), 6amp Switch (Anchor)6amp Switch (Anchor), Fan Regulator (anchor), PVC Tape, 0.75mm Copper wire (Anchor),1mm Copper wire (Anchor), 1.50mm Copper wire(Anchor), 2.50mm Copper wire(Anchor) wire(Anchor), 9watt LED Bulb(Bajaj), Ceiling Fan(Bajaj),Nail, Screw,24watt LED Battenetc complete asper the direction of Engineering in charge. |
AI Tender Summary
Tender Timeline
Mar 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 28, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender