Tender For 2. Construction Of Radhakrushna Temple And Yaghan Mandap At Village Jambhirapal Self-Rehabilitation Colonyt Village Sampura Self-Rehabilitation Colony Under Periphery Development Work
Tender Value
11.60 Lakhs
Estimated cost
Bid Submission
28 Mar 2024
0 days left
EMD
11700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
suliapada → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
2. Construction Of Radhakrushna Temple And Yaghan Mandap At Village Jambhirapal Self-Rehabilitation Colonyt Village Sampura Self-Rehabilitation Colony Under Periphery Development Work All Items Of Building Work
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation in foundation in hard or gravelly soil within 50m initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department. |
| 2 | Filling in Foundation and Plinth with sand including cost, conveyance and royalty charges: |
| 3 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum by the Engineer-in-charge |
| 4 | M15A40 Cement Concrete (1:2:4) using 40mm & down graded stone aggregates. |
| 5 | RCC work in M25 grade concrete (1:1 :2) with 20mm down grade CBHG chips including cost of centering and shuttering charges, labour and cost, conveyance and royalty of materials etc. complete but excluding cost and labour charges of MS reinforcement. |
| 6 | Rigid smooth centering and shuttering for RCC works including false works and dismantling then after casting including cost, carriage, royalty complete in ground floor and as per the direction of Engineer-in-charge. (i) In RCC foundation, plinth band, footing base of columns, precast slabs - |
| 7 | Rigid smooth centering and shuttering for RCC works including false works and dismantling then after casting including cost, carriage, royalty complete in ground floor and as per the direction of Engineer-in-charge. (ii) In RCC beams,columns, girder, bresmers etc- |
| 8 | Rigid smooth centering and shuttering for RCC works including false works and dismantling then after casting including cost, carriage, royalty complete in ground floor and as per the direction of Engineer-in-charge.(iii) In RCC Lintels |
| 9 | Rigid smooth centering and shuttering for RCC works including false works and dismantling then after casting including cost, carriage, royalty complete in ground floor and as per the direction of Engineer-in-charge. |
| 10 | Providing HYSD reinforcement of approved brandstraightening, cutting, bending, binding and tying the grills and placing in position including lapping or welding where necessary, including cost, carriage of tested reinforcing bars, binding wires of 18 to 20 gauge with all leads, lifts and delifts, cost of all labour, mobilisation and demobilisation, all incidental charges,labour cess & excluding GST etc. to complete the item of work as per approved designs, drawing and specification and direction of the Engineer-in-Charge. (Linear measurement will be taken and quantity will be calculated basing on the standard weight of rod as per BIS code). |
| 11 | Brickwork in Foundation and Plinth with Flyash Bricks of size 25cm x 12cm x 8cm in CM (1:6) having crushing strength not less than to 75kg/cm2including cost, conveyance of all materials and labour charges. |
| 12 | Brickwork in Superstructurewith Flyash Bricks of size 25cm x 12cm x 8cm in CM (1:6) having crushing strength not less than to 75kg/cm2including cost, conveyance of all materials and labour charges. |
| 13 | 12mm thick CP (1:6) over outside smoothsurface of brickworkincluding cost, conveyance of all materials and labour charges. |
| 14 | 16mm thick CP (1:6) over inside rough surface of brickwork including cost, conveyance of all materials and labour charges. |
| 15 | 6mm thick CP (1:4) over RCC works for ceiling plaster including cost, carriage of all materials and labour charges. |
| 16 | 20mm thick CP (1:4) as graded plaster over roof slab including cost, conveyance of materials and labour charges. |
| 17 | Supplying and fixing MS Door and Windows including cost, conveyance, & excluding GST etc. complete. |
| 18 | Finishing walls withtwo coats of water proofing cement paint of approved shade including cost of cement paint. |
| 19 | Priming one coat with any approved primer over door and windowincluding cost of primer. |
| 20 | Painting two coats with synthetic enamel paintto new MS work including cost of paints etc.complete. |
| 21 | Fixing of Vitrified Tiles in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles includingrubbing and polishing including cost of tiles. |
| 22 | Fixing of Tilesin Dados, skirting\"s and rises of steps on 12mm thick bed of cement plaster (1:3) joined with cement slurry including cost of tiles. |
| 23 | Brick on edge flooring over one brick flat set in cement mortal (1:8) wth flyash bricks of size 25 x 12 x 8 cm having crushing strength not less then 75 Kg/cm² with cement of approved brand and approved sharp river sand infoundation & plinth or similar works with curing including all cost, T & P, carriage, royalty, labour cess & excluding GST etc. all complete as per direction of Engineer-in-Charge. |
| 24 | Providing 2.5cm thick artificial stone flooring with in cement concrete (1:2:4) with neat cement punning using 12mm size hard granite crusher broken chips, cement of approved brand and approved clean sharp river sand including all cost, T & P with curing, carriage, royalty, labour cess & excluding GST etc. all complete as per specification and direction of Engineer-in-Charge. |
| 25 | Collecting, supplying and spreading of moorum including cost and conveyance of moorum complete in all respect as per the instruction of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Mar 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 28, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender