|
| 1 | Hire charges of Tactor Breaker for excavation in tranches including dressing for searching and opening of leakage in 300 to 750 mmØ C.I./P.S.C./D.I./M.S. including making of water diversion trench near leakage site for dewatering arrangement, and for holding of pipes alignment for proper repairing works, with lifting and taking out the damaged pipe from trench etc. |
| 2 | Hire charges for Diseal Generator set/Electric connection from Electric pole for cutting, welding of M.S. pipe and dewatering work and lighting arrangement etc. complete.l 1 days x 12 month |
| 3 | Charges for lighting,Barricading and traffic diverting from leakage site with safety arrangement during leakage repairing work. i.e. fixing of bulli, coir rope halogen lamp caution board, caution flange for the traffic diversion and removing all these materials after completion of work from site i/c. loading, unloading and transportation etc.1 days x 12 month |
| 4 | Manufacturing of specials and pipes made out of steel plant of HR coils 8mm to 10mm thick plate in shape and size condition i/c cast of steel plate & other electricals & mechenical material i/c suberged are welding i/c cost of transportation, loading & unloading complete pipe and speacials barrel piece, gap piece, spigot & socket end, plain and socket clamp etc as per site condition. |
| 5 | Manufacturing/ providing and fixing of spigot & Socket end, machine end as per site condition suitable for 205/300/400/500/520/600/620/700/750 mm dia pipe and specials etc.(as per IS-3589-2001 or its letter revision/ amendment) |
| 6 | replacement of G.M. check nut in following size of sluice valve made out by single piece. Old material not refendable |
| 7 | 80 mm dia |
| 8 | 100 mm dia |
| 9 | 150 mm dia |
| 10 | 200 mm dia |
| 11 | 250 mm dia |
| 12 | 300 mm dia |
| 13 | 350 mm dia |
| 14 | 400 mm dia |
| 15 | 450 mm dia |
| 16 | 500 mm dia |
| 17 | 600 mm dia |
| 18 | Manufacturingand supply of M.S. valve opening key in following size of sluice valve made out by single piece. As per standard & site conditions. |
| 19 | 80 mm dia |
| 20 | 100 mm dia |
| 21 | 150 mm dia |
| 22 | 200 mm dia |
| 23 | 250 mm dia |
| 24 | 300 mm dia |
| 25 | 350 mm dia |
| 26 | 400 mm dia |
| 27 | 450 mm dia |
| 28 | 500 mm dia |
| 29 | 600 mm dia |
| 30 | Cutting of M.S./C.I./D.I.Pipe with electric Arch machine. |
| 31 | 80 mm dia |
| 32 | 100 mm dia |
| 33 | 150 mm dia |
| 34 | 200 mm dia |
| 35 | 250 mm dia |
| 36 | 300 mm dia |
| 37 | 350 mm dia |
| 38 | 400 mm dia |
| 39 | 450 mm dia |
| 40 | Provision for making arrangement for electricity from MPSEB to rum welding transformer, dewatering pump,& grinding machines, lamps etc. complete at site. |
| 41 | Dewatering arrangment i/c fixing of low head high discharge mud pump with suction of delivery pipe as required. |
| 42 | Painting work of MS pipe line by best quality oil paint |
| 43 | Repairing of honda pump GH 200 line section i/c all matrial such as connecting rod, piston block, bearing, bearing kit, plug, oil seal, water seal, wheel ETC servicing and labour cop. |
| 44 | Labour charges only for repairing of 300 mm dia butter fly valve at water tank inlet & outlet line cutting of old rusted nut bolt & 300 mm dia verticle horizontal CI pipe line by gas cutter dismentling at damaged 300mm dia butter fly valve machining,welding of gear threading of valve & refitting of butter fly valve new nut bolt & welding of pipe complete T&P testing labour charges. |
| 45 | Manufacturing & supply for water level float for indigator of over head tank gambhir line section zone i/c labour charges & all material complete steel float unbreacable, rust proof size 400 mm dia |
| 46 | Fabrication & providing of extra long about 3 mtr MS key as per sample made by MS rod 25 mm thick & MS cap molded on the sluice valve spindle & grouting 50×50×5 mm angle clamp in the chamber wall sluice valve open & close work at gambhir line section. |
| 47 | Providing and fixing Spun yarn Best Quality |
| 48 | 150 mm dia |
| 49 | 200 mm dia |
| 50 | 250 mm dia |
| 51 | 300 mm dia |
| 52 | Providing and fixing of lead wool Containing 90% Lead As per I.S.-318-1981 |
| 53 | 150 mm dia |
| 54 | 200 mm dia |
| 55 | 250 mm dia |
| 56 | 300 mm dia |
| 57 | Providing and fixing Pig lead 99% Pure |
| 58 | 150 mm dia |
| 59 | 200 mm dia |
| 60 | 250 mm dia |
| 61 | 300 mm dia |
| 62 | Providing and Applying of M-seal compound Make Mahindra |
| 63 | 150 mm dia |
| 64 | 200 mm dia |
| 65 | 250 mm dia |
| 66 | 300 mm dia |
| 67 | Providing and fixing of Neoprene Rubber sheet 6mm As per I.S.-638-1979 MAke-TRPL/NAtional/Equivelent |
| 68 | 150 mm dia |
| 69 | 200 mm dia |
| 70 | 250 mm dia |
| 71 | 300 mm dia |
| 72 | Providing and fixing of Nut Bolt Size as per Requirement as per .S.-1363- 1992 & I.S.-4218 part -5-1967MAke TAta/GKW/Standard/Equivelent |
| 73 | 150 mm dia |
| 74 | 200 mm dia |
| 75 | 250 mm dia |
| 76 | 300 mm dia |
| 77 | pipe line work repairing of sluice valve workLabour Work for Sluice valve opening of gear Box taking out of damaged parts like Spar gear & pinion worm shaft half moon gear complete job . |
| 78 | 150-200 mm repairing of sluice valve work |
| 79 | 300-400 mm repairing of sluice valve work |
| 80 | 450 mm repairing of sluice valve work |
| 81 | 500 mm repairing of sluice valve work |
| 82 | 600 mm repairing of sluice valve work |
| 83 | Labour work for Repairing of full round gear damaged teeth metal Refilling and after making of teeth on milling machine complete job for as per original dimension as required gear Boxabove work for. |
| 84 | 150-200 mm repairing of sluice valve work |
| 85 | 300-400 mm repairing of sluice valve work |
| 86 | 450 mm repairing of sluice valve work |
| 87 | 500 mm repairing of sluice valve work |
| 88 | 600 mm repairing of sluice valve work |
| 89 | Repairing of Sluice valve warm & worn shaft making from E.N 8 Material as per original dimension as required gear Box above work for Butter fly valve. |
| 90 | 150-200 mm repairing of sluice valve work |
| 91 | 300-400 mm repairing of sluice valve work |
| 92 | 450 mm repairing of sluice valve work |
| 93 | 500 mm repairing of sluice valve work |
| 94 | 600 mm repairing of sluice valve work |
| 95 | Labour work for Sluice valve refitting of repaired spur gear & pinion worm & worm shaft & dowel pin half moon gear after complete grassing of gear box complete job. At site |
| 96 | 150-200 mm repairing of sluice valve work |
| 97 | 300-400 mm repairing of sluice valve work |
| 98 | 450 mm repairing of sluice valve work |
| 99 | 500 mm repairing of sluice valve work |
| 100 | 600 mm repairing of sluice valve work |
| 101 | Providing and fitting of bearing no. 51211 (SKF or equivelent) on full round gear both side complete job for as per original dimension as required gear box above work for Sluice valve gear box . |
| 102 | 150-200 mm repairing of sluice valve work |
| 103 | 300-400 mm repairing of sluice valve work |
| 104 | 450 mm repairing of sluice valve work |
| 105 | Providing and fitting of bearing no. 51212 (SKF or equivelent) on full round gear both side complete job for as per original dimension as required gear box above work for gear box . |
| 106 | 500 mm repairing of sluice valve work |
| 107 | 600 mm repairing of sluice valve work |
