Highway Department has published Tender For Implementation Of Improvement Measures For 5 High Priority Blackspots Of On Phalodi To Nindar Sh19 And Bikaner Osian Sh 136Mdr 35 Namely Denok Pachori Deu Ghura Bhagwandas And Matora Respectively Under Rshdp Ii In The Districts Of Nagaur A. Submission Date for this Tender is 23-04-2024. Civil Work Tenders in nagaur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2024 | Addendum No. 01 (Date Extended) | Date | 23-04-2024 |
| Sl. No. | Item Description |
| 1 | SITE CLERANCE AND DISMANTLING |
| 2 | Cutting of trees including cutting of trunks, branches and removal of stumps including stacking of serviceable material within a lead of 100 meters and earth filling in the depression/Pit as per Technical clause 201 |
| 3 | (a) Girth 300 mm to 600 mm |
| 4 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplingsand trees girth up to 300 mm, removal of stumps of trees cut earlierand disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201 |
| 5 | a) In area of light jungle |
| 6 | Dismantling of Paver block |
| 7 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per MoRTH specification clause 202. |
| 8 | Bituminous courses |
| 9 | EARTH WORK |
| 10 | Earth work in excavation, including stacking/disposal of surplus material with all lifts and lead up to 50 meters, exclusive of compensation of earth [MoRTH specification : Clause 301 to 305] |
| 11 | Mechanically by power shovel, including mechanical loading and carriage up to 50m. |
| 12 | b)Ordinary Rock using Hydraulic Excavator CK-90 |
| 13 | Construction of embankment with approved material from borrow pits with all leads and lifts complete as per drawings and Technical Specification Clause No. 301 & 305 (with an average distance of transport of 2000 m) |
| 14 | Construction of sub grade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No. 305. |
| 15 | Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Clause No. 305. |
| 16 | Providing Back filling behind abutments, wing walls and return walls, with selected imported granular material of approved quality including all leads and lifts complete as per Technical Specification Clause 305. |
| 17 | GRANULAR SUB-BASE AND BASE COURSES |
| 18 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means with all lead |
| 19 | Providing, laying, spreading and compactingstone aggregate forWet Mix Macadam (as per table 400-12 and 400-13) specification including premixing the material with water to OMC in wet mix plant as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/Front end Loader/paver finisher, in sub base/ base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintenance of diversion etc. (MoRTH specification : Clause 406 & Clause 112)by mechanical means with all lead . |
| 20 | BITUMINOUS / PQC COURSES |
| 21 | Providing and applying primer coat over prepared surface or granular base with bitumen emulsion SS-1 as per IS: 8887 & manufacturer’s specifications @ 6 kg /10 Sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification CI 502 & 112 (Including cleaning of road surface ) |
| 22 | Providing and applying tack coat on the prepared surface, withbitumen emulsion RS-1 as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 ( Including cleaning of bituminous road surface ) (b) On Bituminous surface |
| 23 | Providing and laying bituminous concrete as per design mix on preparedsurface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with Front end loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and filler as per table 500-9 with aggregates in hot mix plant More than 60-90 TPH Transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification : Clause -507 & 112) with all lead. |
| 24 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 & 500-10 and design mix for base/binder course including loading of material with Front end loader, heating of binder (including cost of anti-stripping compound wherever required) aggregate and filler as per table 500-9,in hot mix plant More than 60-90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 505 & 112] with all leads . Speed breaker/speed table |
| 25 | Traffic signs, Road markings and other road appurtunences |
| 26 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 325 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409. |
| 27 | Using concrete mixture |
| 28 | Channel Kerb |
| 29 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing |
| 30 | Informatory signs |
| 31 | Cautionary/ Warning signs ( 900 mm Eq. triangle) |
| 32 | Information signs (800 mm x 600 mm) |
| 33 | Cautionary/ Warning signs ( 600 mm circular) |
| 34 | Mandatory / Regulatory sign (900mm octagon) |
| 35 | Pavement marking with hot applied thermoplastic compound materials for road markings with surface application of glass beads at specified rate complete as per drawing or directed by the Engineer and Technical Specification Clause 803 for 2.5 mm thickness of marking and consisting of: |
| 36 | a) Lane, Centre line, Edge and other marking along strips SpeedTable Bars, Directional arrows |
| 37 | Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive. |
| 38 | One way hazard marker |
| 39 | Two way hazard marker |
| 40 | Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive-(Road studs) |
| 41 | h) Chevron 600 x 750 mm |
| 42 | Providingrumble strips complete as per drawing and Technical Specification Clause 805 |
| 43 | Painting median and footpath Kerbs in alternate bands of 500 mm wide in white and Black as per drawing and Technical Specification |
| 44 | Providing Thermoplastic Bar Marking (TBM) completeas per drawing and Technical Specification |
| 45 | TBM 5mm Thick |
| 46 | TBM 10mm Thick |
| 47 | TBM 15mm Thick |
| 48 | Miscellaneous Works |
| 49 | Providing and fixing of Precast concrete interlocking / Paverblocks of 80mm thick manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class as per IS: 15658-2006. The C.C. interlocking paving blocks be laid on average 30mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. The work includes earth work in cutting of B/T road, cutting of WBM road and disposal of unserviceable material with all leads & lifts and stacking of serviceable material complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lifts & taxes General specification of Blocks. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
