Tender For Spr-27019732-Qaqc 27019732 10 10 30 INST. HARD DRIVE & CONFIGURATION OF NVR 1 NO 220 INSTALLATION OF ACCESSORIES 30 LE 70 INST. & COMM. FOR WIRELESS SYSTEM 12 NO 20 INST. OF NEW CCTV CAMERA & CONFIGURATION 27 NO 150 END TO END DATA TERMINATION 237 NO 200 PVC PIPE / CASING CAP LAYING WORK 1,100 M 100 FIBER CORES LIU TERMINATION 4 NO 210 Device & Cable Marking & ferruling 474 LO 90 INSTALLATION OF JUNCTION BOX 36 NO 270 INSTALLATION OF ACCESSORIES 1 LE 120 OFC TESTING WITH OTDR 96 NO 50 INST&CONFIG.WEB MNGD POE NETWORK SWITCH 13 NO 170 Network Rack 15 U 5 NO 110 FO SPLICING CHARGES 96 NO 40 INSTALLATION OF CAMERA HOUSING AND STAND 36 NO 250 INSTALLATION OF ACCESSORIES 35 LE 10 INSTALLATION & CONFIG OF ATTENDANCE SYS 1 NO 240 INSTALLATION OF ACCESSORIES 15 LE 160 UTP Cat 6 Information Outlet Jack 10 NO 60 INST&CONFIG.WEB MNGD POE NETWORK SWITCH 1 NO 80 FIBER LAYING 2,000 M 130 UTP CABLE LAYING 16,775 M 140 EXECUTION OF UTP NODES 250 NO 180 INSTALLATION OF NETWORK RACK 1 NO 190 HDPE PIPE LAYING 2,000 M 230 INSTALLATION OF ACCESSORIES 10 LE 260 INSTALLATION OF ACCESSORIES 50 LE Email : HARSH.YADAV@AMNS.IN Contact : Name : Harsh Yadav Item Details : SCOPE OF WORK FOR NETWORK <(>&<)> CCTV Passive INSTALLATION Scope of work – [ Network Passive Works] SCOPE OF WORK – QTY Service Description Unit Qty Fiber Cable laying Mtr. 2000 24F LIU Installation charges Nos. 4 Fiber Core Splicing charges Nos. 96 OTDR Testing of Fiber Core Nos. 96 Cat6 UTP Cable Laying charges Mtr. 16775 Face Plate and Back Box Installation charges Nos. 250 Cat6 IO Punching charges Nos. 237 24 Port Loaded Patch Panel and Cable Manager Nos. 10 9U/15U Rack Installation and Dressing Nos. 5 42U Rack Installation and Dressing Nos. 1 HDPE PIPE LAYING WORK Nos. 2000 25mm Cassing Capping, Flexible Pipe,PVC Pipe charges Nos. 1100 Cat6 Cable Ferruling and Tagging and Rack Side Patch Cord Tagging Nos. 474 25mm PVC Conduit Accessories (L, T, Joint) Nos. 30 25mm Metal saddle of 100 pcs (Without Base) Box. 10 35x8 Metal Screw Packet of 100Pcs Packet 15 PVC Grip Packet of 100Pcs Packet 35 Tap Roll Roll 50 Bugle Head Black Drywall Screw, Size: 3.5 X 25mm 1000Pcs Nos. 1 Dedicated Supervisor on site with technical team, Vendor should have vast experience of passive networking job (minimum 15 Years) Daily <(>&<)> weekly project report and complete governance 1. Cable pulling <(>&<)> fixing on cable tray/ conduits. 2. Labeling, cable termination <(>&<)> cable routing / dressing at rack / end points. 3. Label the cables, apply ferruling as per numbering scheme, test them <(>&<)> maintain detailed reports for same. 4. Terminate the internal cables in wiring block, data cable in jack panel using standard tools as per structured cabling standards. 5. Test the node using wire scope. 6. Each node will be tested against all required structured cabling standards. Results of same shall be in acceptable window as specified by standards. 7. Cable Tag Tie mandatory on each UTP Cable connected to switch port for identification purpose 8. Proper dressing of all the UTP cables in the Rack 9. Require proper clamping of UTP Cables / Casing capping where tray / conduits are not available. 10 Fixing of power outlets/spike busters for switches and other network equipment in the IT room. 10. Removing unused connections from switch/hub hence making ports free on the switch/hub 11. Shifting of cabling components from stores to IT. 12. Helping AMNS network engineers for carrying out tests or Page 2 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108251 Date 13.03.2024 Submission Date 23.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Chaitali Panchal Contact Email CHAITALI.PANCHAL@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details installation of new equipment. 13. Best efforts will be put to maintain minimum network down time. 14. UTP <(>&<)> Fiber laying 15. HDPE pipe laying 16. Fiber cores splicing <(>&<)> testing 17. Fiber OTDR test result 18. Racks installation 19. Network devices installation (Switch, Router, firewall etc) 20. LIU installation 21. Jack panel <(>&<)> cable manager installation 22. Faceplate, gang box and I/O Termination The work shall consist of the following: Establishing a new communications closet for the building in the space identified Installation and termination of Category-6 network cabling at identified drop locations Labeling and documentation of installed cable plant Category-6 certification testing and test results Installation of single-mode 24-strand count fiber between rack (including rack-mount FTP) and existing building demarcation point (including wall-mount FTP). Terminations will be SC type. Removal and demolition of pre-existing network cable post-migration CABLING GUIDELINES o All network drops shall consist of Category-6 cable, jacks, and patch panels. o The pin-out for all drops is to be 568A. o Cable distance shall not exceed 90 meters (300 ft.) o A 10 ft. service loop will be provided within 10 ft. of each termination. o A minimum bend radius of 1-inch shall be respected for all cabling. o A maximum bundle size of 24 cables shall be respected. o Each drop will make use of a blue keystone termination and appropriate faceplate. o Patch panels shall be Cat-6 rated LABELING AND DOCUMENTATION A six-character labeling scheme, referred to as Jack ID hereafter, shall be used for all network drops as follows: A single letter, A-Z indicating the network closet A numerical digit 0-9 indicating the floor (e.g. 1 for first floor) A three-digit numerical identifier representing the wall or biscuit box for the drop A single letter A-Z indicating the individual jack within the wall box or biscuit. When a box provides multiple jacks, jacks are to be ordered left to right, top to bottom, like reading a book. No punctuation shall be used. Example identifiers: A1001A, A1001B, A1002A ... A2001A. For each cable the Jack ID shall appear using printed permanent labeling in 4 locations: Each end of the cable within 1 ft. of termination. Above each patch panel port On the box or faceplate of the drop, once, omitting the jack letter (e.g. A1001 rather than A1001A and A1001B). A cut sheet of Jack ID to room number mappings will be provided as a deliverable in electronic form. An as-built floor plan with drop locations will be provided in electronic form (CAD or PDF). Page 3 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108251 Date 13.03.2024 Submission Date 23.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Chaitali Panchal Contact Email CHAITALI.PANCHAL@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Test results will be labeled using the Jack ID and provided as a single report. Test results will include a pass-fail summary followed be detailed test results for each Jack ID. TESTING Testing of all newly installed cable channels shall be performed prior to system cutover. 5.1 COPPER TESTING All category 6A field-testing shall be performed with a Fluke Networks DTX-1800 tester or better. All balanced twisted-pair backbone cables exceeding 90 m (295 ft) or 100 m (328 ft) shall be 100% tested for continuity if applicant’s assurance is not required. Category 6A balanced twisted-pair horizontal and backbone cables, whose length does not exceed 90 m (295 ft) for the basic link, and 100 m (328 ft) for the channel shall be 100 percent tested according to ANSI/TIA/EIA-568-B.1. Test parameters include wire map plus ScTP shield continuity (when present), length, NEXT loss (pair-to-pair), NEXT loss (power sum), ELFEXT loss (pair-to-pair), ELFEXT loss (power sum), return loss, insertion loss, propagation delay, and delay skew. FIBER OPTIC TESTING HORIZONTAL FIBER TESTING Fiber horizontal cables shall be 100% tested for insertion loss and length Insertion loss shall be tested at 850 nm or 1300 nm for 50/125 m and 62.5/125 m multimode cabling in at least one direction using the Method B (1-jumper) test procedure as specified in ANSI/TIA/EIA-526-14A. The horizontal link must be guaranteed to meet 10G-BASE-FL performance requirements. ADMINISTRATION <(>&<)> DOCUMENTATION LABELING All cables shall be labeled at each end. The cable or its label shall be marked with its identifier. A unique identifier shall be marked on each faceplate to identify it as connecting hardware. Each port in the faceplate shall be labeled with its identifier. Each port on the connecting hardware shall be labeled with its identifier. DRAWINGS As-built drawings shall be supplied by the contractor showing the locations of and identifiers for all: Horizontal cable routing and terminations Data outlets/connectors Backbone cable routing and terminations RECORDS AND REPORTS All records shall be created by the installation contractor and turned over at the completion of work The format shall be computer based and both soft copies and hard copies shall be part of the As-built package. The minimum requirements include: Page 4 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108251 Date 13.03.2024 Submission Date 23.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Chaitali Panchal Contact Email CHAITALI.PANCHAL@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Cable records must contain the identifier, cable type, termination positions at both ends, splice information as well as any damaged pairs/conductors. Connecting hardware and connecting hardware position records must contain the identifier, type, damaged position numbers, and references to the cable identifier attached to it. Test documentation on all cable types shall be included as part of the As-built package. All reports shall be generated from the computer-based program used to create the records above. These reports should include but not limited to: Cable Reports Cross-connect Reports Connecting Hardware Reports SCOPE OF WORK OF WIFI <(>&<)> Switches L2<(>&<)> L3 DEVICE INSTALLATION HAZIRA LOCATION As per our understanding, we are required to provide installation and support services for Cisco Switches L2 <(>&<)> L3 WIFI Aruba. Please find standard scope of work as per below. Switches L2 <(>&<)> L3 • Total 14 Network Switches installation • Rack and stack of Switches • POST and Firmware check/upgrade, Cisco contract confirmation • Configuration of management accounts and hardening of device for security • Stacking of Core and access switches • Vlan configuration on Core and access and trunk links • SFP installation • intervlan routing, Static routes configuration if required • Configuration of EtherChannel towards uplinks • Configuration, testing of STP for loop avoidance • Configuration of common NTP server for all devices Aruba Wireless: • Power on self-test for all AP • License activation for access points and Aruba contract confirmation • Configuration of Master AP and join remaining AP to same single cluster • Configuration of Multiple SSID with specific VLAN • Configuration of wireless roaming • Radius config if requested for authentication • Configuration of ACL if required • Configuration of Static routes as per required • Documentation Following is Bill of Material where above Scope of work is applicable. Cisco Switches L2 13 Cisco/C9200L-24T-4G-E And Cisco/C1000-24FP-4G-L Cisco Switches L3 1 Cisco/C9500-16X-A Aruba AP-515 12 Wi-Fi Access Point Documentations: - - All configuration details of each device - Details topology diagram - IP segment details o Data o Voice / Video Page 5 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108251 Date 13.03.2024 Submission Date 23.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Chaitali Panchal Contact Email CHAITALI.PANCHAL@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details o Management - All configured device inventory details - Network connectivity diagram with port wise - Testing document of Network switches in redundancy SCOPE OF WORK FOR CCTV INSTALLATION Scope of work CCTV CCTV Installation, Testing <(>&<)> Commissioning Services Active devices Following is Bill of Material where above Scope of work is applicable. Service Description Unit Qty Dome/Bullet Camera Installation <(>&<)> Implementation charges Nos 27 NVR Configuration <(>&<)> Installation charges Nos 01 Fabrication stand for CCTV JB <(>&<)> PVC Junction Box Fixing Nos 36 43-inch 24x7 commercial display Nos 01 Dedicated Supervisor on site with technical team, Vendor should have vast experience of Passive networking and CCTV Job (minimum 15 Years) Daily <(>&<)> weekly project report and complete governance. 1. Labeling, cable termination <(>&<)> cable routing / dressing at rack / end points. 2. Label the cables, apply ferruling as per numbering scheme, test them <(>&<)> maintain detailed reports for same. 3. Cable Tag Tie mandatory on each UTP Cable connected to switch port for identification purpose. 4. Proper dressing of all the UTP cables in the Rack 10 Fixing of power outlets/spike busters for switches and other network equipment in the IT room. 5. Removing unused connections from switch/hub hence making ports free on the switch/hub 6. Shifting of cabling components from stores to IT. 7. Helping AMNS network engineers for carrying out tests or installation of new equipment. 8. Network devices installation (Switch, NVR, Camera etc) 9. CCTV <(>&<)> NVR, Switches installation <(>&<)> Inventory details. 10. Site Acceptance test final Documentation <(>&<)> CCTV Camera network drawing to mentioned camera <(>&<)> switches IP address detail. LABELING AND DOCUMENTATION. For each cable the Jack ID shall appear using printed permanent labeling in camera end <(>&<)> switch end all locations: Each end of the cable within 1 ft. of termination. Above each patch panel port RECORDS AND REPORTS All records shall be created by the installation contractor and turned over at the completion of work. The format shall be computer based and both soft copies and hard copies shall. - SCOPE OF WORK FOR AV System Setup for Hazira Location - As per our understanding, we are required to provide installation services for AV system setup at Hazira Location. Please find standard scope of work as per below. (3 Months post material delivery) 1.Unpacking and verification of condition of All AV System Asset. Page 6 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108251 Date 13.03.2024 Submission Date 23.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Chaitali Panchal Contact Email CHAITALI.PANCHAL@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details 2. Securing the mounting bracket to standard wall frame or masonry wall / Floor stand. 3. Mounting and securing the AV setup. 4. Connection of AV Setup to pre-existing power source and audio/video feed. 5. Power cables will be concealed by using track molding and neats wire management system. 6. Connection and configuration of existing video and/or audio components provided by Customer in the same room 7. Moving all packing material to a customer-designated location in the immediate vicinity. 8. Demonstration of AV System Remote control to AMNS authorities. 9. Share to all AV setup credentials etc. windows logging, WIFI SSID, Screen key, IP Address. 10. Sign off on the AV installation is completed <(>&<)> as well SOP require etc TV <(>&<)> OPS, Video conferencing room, Wireless Solstice POD Gen 3. 11. User manual guide and PPT Photos of conference room. 12. Need to provide all setup drawing to AMNS authorities 13. Completed installation report <(>&<)> inventory of AV system. Installation Qty Description Make Model UOM Qty Smart Interactive 4K display | Size: 75 Newline Q75 NO 1 Display trolly LUMI T1035L NO 1 Built-in 4K Ultra-HD camera with 4x digital zoom CLEARONE Versa Mediabar NO 1 OPS : I5-10 Gen, 8 GB ,128 GB, Windows 10 Pro Newline Newline NO 1 Attendance system Installation Scope of Work Scope of - Including: - • Vendor shall install and commission ACS controllers, Biometric readers, HID readers. • Vendors shall make supervision of cable laying as per guidelines. • Vendor shall install the Morpho manager application in Workstation and give training to AMNS person for User enrolment. • Vendor shall add all controllers to the central attendance system at Hazira. • Vendor make sure that all user’s attendance retrieve from the central attendance system and submits attendance report to EIC. • Testing, observations <(>&<)> remaining work if any in Vendor Scope. • Contractor shall follow the safety rules OF AMNS. • Engineers and their staff will complete the work permit process before starting the work and start work with proper PPE. • The contractor shall report to AMNS Engineer before carrying out the site activities. • Enrollment of all the users in new system with configuration, testing • Onsite support till the system is stabilized and working completely. Scope Excluding: - • Laying of all cables (Cat – 8, 6 core, power cable) from controllers to readers will be vendor scope. • If any structure is required to mount the readers will be in AMNS scope. • To Provide the UPS power at controller’s locations. • To provide the workstation for the Morpho manager application. • To add the fingerprint templet in the Morpho manager application, however, Vendor will give training to deputed person. Project Completion • Project Sign-Off Certificate • Project Report • Scope of work is applicable QTY. AMC2 Door controller 4 Nos Page 7 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000108251 Date 13.03.2024 Submission Date 23.03.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Chaitali Panchal Contact Email CHAITALI.PANCHAL@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details AMC enclosure with 1 DIN rail 4 Nos AMC Power Supply Unit 4 Nos Signo 20 Model with STANDARD Credential Profile (Attendance <(>&<)> Door access Reader) Attendance <(>&<)> Door access Reader 16 Nos 8 core 0.5 sq mm aluminum shielded cable 1500 Mtr LOCK, ELECTROMAGNETIC,205X5X25, ELECTRONIC ELECTRO MAGNETIC Lock with Power 15 Nos SWITCH, PUSHBUTTON,1NO1NC,24V,5A,50HZ 15 Nos HDPE PIPE LAYING WORK 1500Mtr License for 32 doors ( Need to Activate existing BIS server system ) 32 Nos License for BIS-XACE-32DR*, 1yr 1 Nos LINE ITEM WISE SCOPE: 1) Attendance and door access Services 3011605 - INSTALLATION <(>&<)> CONFIG OF ATTENDANCE SYS, Bosch MAKE - 1 NO. License for 32 doors-BIS-XACE-32DR49-Bosch-1 NO. License for BIS-XACE-32DR*, 1yr- BIS-SMA-32DR- Bosch- 1 NO. HDPE PIPE LAYING WORK-1500 MTR2) CCTV Active device NEW CCTV CAMERA Installtion <(>&<)> Implementation OF Active devices 3011893-Dome/Bullet Camera Installation <(>&<)> Implementation charges-27 NO 3012708-NVR Configuration <(>&<)> Installation charges-1 NO 3012647-Fabrication stand for CCTV JB <(>&<)> PVC Junction Box Fixing-36 NO 3)Network <(>&<)> WIFI Active device Nework <(>&<)> WIFI,Printer Installtion <(>&<)> configuration OF Active devices 3012709-Switch Installation <(>&<)> Implementation charges-13 NO 3012709-Core Switch Installation <(>&<)> Implementation charges-1 NO 3012657-Wireless AP Installation <(>&<)> Implementation charges-12 NO 4)Network And CCTV Passive Service: Service of Passive work Network <(>&<)> CCTV 3012475-24 Core Fiber Cable Laying charges-2000 MTR 3001698- PVC Junction Box and Fabrication stand, JB Installation Charges OF CCTV camera -36 NO 3012478-24F LIU Installation charges-4 NO 3012656-Fiber Core Splicing charges-96 Nos. 3011796-OTDR Testing of Fiber Core-96 Nos. 3012477-Cat6 Cable Laying charges -16775 Mtr. 3003920-Face Plate and Back Box Installation charges-250 Nos. 3012476-Cat6 IO Punching charges-237 Nos. 3008064-24 Port Loaded Patch Panel and Cable Manager-10 Nos. 3008063-9U/15U Rack Installation and Dressing-5 Nos. 3012651-42U Rack Installation and Dressing- 1 Nos. 3012474-HDPE PIPE LAYING WORK- 2000 Nos. 3012772-25mm Cassing Capping, Flexible Pipe,PVC Pipe charges-1100 Nos. 3011898-Cat6 Cable Ferruling and Tagging and Rack Side Patch Cord Tagging -474 Nos. 3002136-25mm PVC Conduit Accessories (L, T, Joint)- 30 Nos. 3002136-25mm Metal saddle of 100 pcs (Without Base)- 10 Box. 3002136-35x8 Metal Screw Packet of 100Pcs - 15 Packet 3002136-PVC Grip Packet of 100Pcs - 35 Packet 3002136-Tap Roll-50 Roll 3002136-Bugle Head Black Drywall Screw,Size: 3.5 X 25mm 1000Pcs 1 N
