|
| 1 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc, laying of cable, or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified. |
| 2 | M&L for PCC 1:4:8 type-D2 (using 40mm graded aggregate), as in foundations, filling and mass concrete, complete all as specified. |
| 3 | M&L for reinforced cement concrete of grade M-25 (Design Mix) (using 20 mm graded aggregate), as in foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 4 | M&L for reinforced cement concrete of grade M-25 (Design Mix) (using 20 mm graded aggregate), as in beams, cantilevers, lintels over 1.5m span, complete all as specified and directed. |
| 5 | M & L for reinforced cement concrete of grade M-25 (Design Mix) (using 20 mm graded aggregate), as in columns, complete all as specified and directed. |
| 6 | M&L for reinforced cement concrete of grade M-25 (Design Mix) (using 20 mm graded aggregate), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like , complete all as specified and directed. |
| 7 | M&L for reinforced cement concrete of grade M-25 (Design Mix) (using 20 mm graded aggregate), as in chajjas, complete all as specified and directed. |
| 8 | Form work to sides of concrete fdns, footings, bases of columns, raft and raft beams, sides and soffits of fdn and plinth beams and similar works in rough finished, complete all as specified and as directed. |
| 9 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc. work in rough finished square/ rectangular surfaces, complete all as specified and as directed. |
| 10 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 11 | Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar workn exc 200mm thick flat rough finished surfaces, complete all as specified & directed. |
| 12 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished surfaces, complete all as specified & directed. |
| 13 | Formwork to chajjas and similar items including edges flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 14 | M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 15 | All as per item no.14 above but 5mm dia and over and up to and including 10mm dia in stirrups spacers and binders. |
| 16 | M&L for brick work with sub class \"B\" Bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed. |
| 17 | M&L for brick work with sub-class `B\" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed. |
| 18 | M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished the surface fair and even, complete all as specified. |
| 19 | M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished the surface fair and even, complete all as specified. |
| 20 | M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface fair and even, complete all as specified. |
| 21 | M&L for applying 1.5mm thick cement base wall care putty on plastered surface of wall and making the surface even & smooth for receiving distemper / paint of any description, complete all as specified & directed. |
| 22 | M&L for applying 1.5mm thick cement base wall care putty on plastered surface of ceiling and making the surface even & smooth for receiving distemper / paint of any description, complete all as specified & directed. |
| 23 | M&L for preparation of newly plastered surfaces of walls including sides and soffits ofbeams, fascias, parapets etc and applying two coats of oil bound distemper, complete all as specified & directed. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint, all as specified and directed. |
| 25 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and as directed. |
| 26 | M&L for earth filling under floors or in foundations (except material) including watering and consolidation, all as specified. |
| 27 | M&L for 100mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base, complete all as specified. |
| 28 | M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) to receive the top layer of tiles, complete all as specifie and directed. |
| 29 | M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified. |
| 30 | M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified. |
| 31 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed. |
| 32 | M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick (with multi colour combination in pattern as directed), set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed. |
| 33 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 34 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheetreinforced with MS square tube S&F in opening as per specification and drgs, complete all as specified. |
| 35 | S&F butt hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed. |
| 36 | S&F 100 mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 37 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 38 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium complete alloy all as specified and directed. |
| 39 | S&F aluminium window and ventilator shutters with powder coating (minimum thickness of powder coating 50 micron) of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.), suitable handle (1 no.), complete all as specified |
| 40 | M&L for 4.8mm thick froasted/ figured glass fixed with beading in aluminium frame, complete all as specified. |
| 41 | S&F 15 mm bore tubes, \"medium grade\", galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified. |
| 42 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified. |
| 43 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified. |
| 44 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified. |
| 45 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified. |
| 46 | S&F 110mm bore PVC (SWR) bends any radius with access door, all as specified. |
| 47 | S&F 75mm bore PVC (SWR) bends any radius with access door, all as specified. |
| 48 | S&F PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified. |
| 49 | S & F 75mm bore PVC (SWR) vent cowl,complete all as specified. |
| 50 | S&F 75 mm bore PVC (SWR) reducer, complete all as specified & directed. |
| 51 | S&F white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, 75 mm long PVC waste pipe, chain and plug and porcelain stopper, etc complete. |
| 52 | S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified & directed. |
| 53 | S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified & directed. |
| 54 | S&F PVC low level flushing cistern, valve less, syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection, complete all as specified. |
| 55 | S&F white vitreous china urinal half stall type (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement and waste pipe, complete all as specified. |
| 56 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified. |
| 57 | S&F 40mm dia and 75cm long PVC waste pipe including tail suitable for urinals etc, complete all as specified. |
| 58 | S&F bib taps, cast copper alloy, fancy tyoe, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed. |
| 59 | S&F stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type), with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed. |
| 60 | S&F pillar taps, cast copper alloy, fancy type, chromium plated with capstean head screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe, complete all as specified & directed. |
| 61 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm, all as specified & directed. |
| 62 | S&F 600 mm x 450 mm size beveled edge mirror 5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified & directed. |
| 63 | S&F tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed. |
| 64 | S&F health faucet (ABS body) mild steel chromium plated for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified. |
| 65 | S&F soap dish, brass CP any type and of suitable size, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 66 | S&F 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed. |
| 67 | M&L for hardcore of broken stones or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as specifed. |
| 68 | M&L for 75 mm thick PCC type C-2, 1:3:6(using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed. |
| 69 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and as directed by the Engineer-in-Charge. |
| 70 | Removing surplus excavated soil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified. |
| 71 | M&L for cleaning the existing roof surfaces including parapet and gutters, pipe mouths, etc of all foriegn matter such as fungus, moss, dust etc by wire brushing and applying water proofing treatment over roofs including comprising of the following, complete all as specified & as directed:-(a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/sqm as per IS 3384-1986 on prepared surfaces. Surfaces shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.(b) Applying one coat of hot straight run bitumen @ 1.2 Kg/sqm of grade 30/ 40 confirming to IS-73 (Grade S-35)(c) Laying 3 mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75 mm at sides and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminous primer, all as per manufacturer\"s instruction including preparation of surface.Note: Water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. Contractor shall give 10 years guarantee for effectiveness of water prrofing treatment. 2.5% of workdone amount of this items shall be retained from the contractor payment for a period of 10 years reckoned from date of physical completion of the work or in lieu contractor may deposit bank FDR for the said tory for 10 years which shall be released by GE on the expiry of satisfactory completion fo 10 years period, complete all as specified and dircted. |
| 72 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out, in any type of soil, complete all as specifed. |
| 73 | M&L for hardcore of broken stones or bouldersof guage exc 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specifed. |
| 74 | M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles, spread, rolled and consolidated to gradient as required, complete all as specified. |
| 75 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hard standing, complete all as specified and directed. |
| 76 | M&L for road side kerb with factory made Precast cement concrete block of mix 1:2:4 type B-1 using 20 mm graded stone aggregate, not exc 100 mm in thickness, set in CM 1:3 including making joints with or without grooves (thickness of joints except at curve shall not be more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 77 | M&L for preparation of new concrete surfaces and applying two coats of synthetic enamel paint over a coat of priming paint, complete all as specified and directed. |
| 78 | Removing surplus excavated soil to a distance exc 250m but not exc 500m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed. |
| 79 | S&F 150mm internal dia salt glazed stoneware pipes laid in trenches and jointed as specified including testing, complete all as specified. |
| 80 | M&L for cement concrete 1:3:6 type C-2, as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipes, complete all as specified. |
| 81 | M&L for brick work with sub class \"B\" Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed. |
| 82 | M&L for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work finished even and smooth without using extra cement, complete all as specified. |
| 83 | Supply only integral water proofing compoud all as specified. |
| 84 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded aggregates), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed. |
| 85 | M&L for factory made RCC cover with cover frame comprising of 75 mm thick cover, area of each cover slab exc 0.5 sqm but & not exc 1.00 sqm including provision ofhot dip galvanized lifting hook for lifting overall cover with suitable size angle iron frame, RCC cover of M30 or higher grade concrete by vibro compression process, medium duty, confirming to IS-12592 including fixing on manhole, complete all as specified and as directed by Engr-in-Charge. |
| 86 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 typeB-l smooth finished, and reforming benching as required for 150mm internal dia of pipe, complete all as specified and directed. |
| 87 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light/bell point controlled by one switch.Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. |
| 88 | All as per srl item No. 87 here-in-before but One ceiling fan/exhaust fan point controlled by one switch |
| 89 | All as per srl item No. 87 here-in-before but One socket outlet 5 amps controlled by one switch on independent board |
| 90 | All as per srl item No. 87 here-in-before but with 2.5 sq mmFRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. |
| 91 | S&F modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed. |
| 92 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 250 volts, one module complete all as specified & directed. |
| 93 | S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed |
| 94 | S&F modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed |
| 95 | Supply and fix Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as specified. |
| 96 | M&L in replacement Sub main wiring concealed with 4 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor wire 1100 V grade, drawn into and including PVC rigid Conduit of suitable size including 4 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth pointall as Specified and directed by Engr-in-Charge. |
| 97 | Supply and fix Distribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified. |
| 98 | Supply and fix Distribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified. |
| 99 | M&L MCB SP 6 to 32 Amp, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified. |
| 100 | Supply and fixing MCB, SPN type of 40 to 63 amps capacity, 240V, 10 KA with all connections complete all as specified. |
| 101 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified. |
| 102 | Supply and fix Building security light with high efficienthigh power LED street light 30 watt with lens with pressure die cast aluminium housing and enclosed with toghened glass IP-66, and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc bracket. clamps and all other fixing accessories complete all as specified and directed by Engr-in Charge. |
| 103 | S&F in repair wall mountedLED batten with polycarbonate housing and initigrated electronic drive20 watt fixture 4 feet provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified. |
| 104 | S&F in repair wall mountedLED batten with polycarbonate housing and initigrated electronic drive10 watt fixture 2 feet provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified. |
| 105 | Supply & laying of cable in trenches/ at walls/ over roof etc with proper clamp and other fixing sccessories and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified. |
| 106 | Supply & laying of cable in trenches/ at walls/ over roof etc with proper clamp and other fixing sccessories and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified. |
| 107 | M&L for Sand filling in and around LT/HT cable 8cm thick below and 15cm above the cable respectively after laying the cable gently punning down complete all as specified and dircted. |
| 108 | M&L for laying of bricks of common burnt clay, sub class-Bfor LT underground cable protection, complete all as specified. |
| 109 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified. |
| 110 | Supply and fix in replacement of MCB protected modular AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 20 Amp capacity and PVC gang box etc, complete all as specified and directed by Engineer-in charge. |
