Military Engineer Services-MES has published Tender For Additional / Alternator To Existing Gren Firing Range At Mandalay Trg Area Under Ge Kasauli.. Submission Date for this Tender is 28-03-2024. Mobile Generator Tenders in subathu Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Schedule "A" Section - I |
| 2 | Dismantling of CGI/PGI sheet any thickness, any gauge or similar pattern as in roof covering |
| 3 | Dismantling of wrought iron or mild steel work, any description not otherwise provided forcomplete all as specified. |
| 4 | Demolition of cement concrete (un re-inforced) in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified . |
| 5 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) |
| 6 | Taking down cement plaster on brick wall surfaces etc incl raking out joints hacking for key, scrubing down with water etc cpmplete all as specified and as directed |
| 7 | Taking down chowkhats or frame with shutter (without taking off shutters from the frames) n.exc. 1.5 Sqmcomplete all as spd and as directed. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed.. |
| 9 | Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed. |
| 10 | Material & Labour brick work with sub class "B" bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed. |
| 11 | Material & labour for 15mm thick rendering in cementmortar 1:4 over fair faces ofbrick masonry surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified. |
| 12 | M&L rendeing 10mm thick other then fair faces surfaces in CM 1:6 finished even and smooth with out using extra cement(Internal surfaces) |
| 13 | M&L rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in ceilling finished fair and even without using extra cement complete all as specified and as directed |
| 14 | Material & Labour for 50mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item. |
| 15 | M&L MS TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 16 | Dittoas above item no. 14.00 , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 17 | M&L for M-25 (Design Mix) 20 mm graded aggregatesSlabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 18 | M&L for M-25 (Design Mix) 20 mm graded aggregates Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 19 | M & L Non Skid ceramic tiles 7 to 8 mm thick area exc 0.18sqm n exec 0.38 sqm in floors, set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. 15mm thick screed bed or bedding layer in C.M 1:4 etc complete all as specified & as directed |
| 20 | Ditto as above item no. 18.00but skirting over 10 mm thick rendring in CM 1:4 |
| 21 | M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in screed bed over sub base. |
| 22 | Pressed steel frames for doors of size 105 x 60mm thickness 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, as specified, supplied and fixed |
| 23 | S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle , and steel peg stay , complete with glazing bars , dovetailed or welded complete all as specified & diretced |
| 24 | Supply and fixing Factory made plain, framed, panelled shutters , 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed. |
| 25 | S&F galvanised mildsteelwire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specifeid |
| 26 | S&F sheet glass , ordinary quality & glazing 3mm thick, with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified & as diretced |
| 27 | S & F in repairs curtain rails anodised aluminium alloy with fixing brackets etc complete all as specified |
| 28 | Supply and fixing Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed. |
| 29 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 30 | Supply and fixing aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed. |
| 31 | Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed. |
| 32 | M&L for preparation of plastered or unplastered newsurfaces of wallsand applying two coat of oil emulsion distemper (tint as approved by GE) including one coat of primer complete all as specified. |
| 33 | M&L for preparation of plastered or unplastered newsurfaces of wallsand applying two coat of cement paint (tint as approved by GE) including one coat of primer complete all as specified. |
| 34 | M & L Preparation of new or previously untreatedsurfaces of wood or based materials of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paintover a coat of pink primer complete all as specified. |
| 35 | Material & labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (1st quality) over a coat of red-oxide primer complete all as specified & directed. |
| 36 | M&L for Granite as in steps, pillars,window cills, cooking plateforms and like, 20mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thickcement screed bed in CM(1:6) complete all as specified. ( size of the slabs shalll not be less than 100cmx60cm ) Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/ edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd. |
| 37 | Material & Labour for Plain Cement concrete type B-0 (1:2:4) using 12.50mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in pressed steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 38 | Cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as spd. |
| 39 | Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of plinth beams. |
| 40 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping |
| 41 | M&L 10mm thick Rendering 10mm thick on fair faces of brick work or concrete sur- faces plaster in CM 1:4 over roof |
| 42 | Integral waterproofing compound work complete all as specified & directed. |
| 43 | Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfacesall as specified and directed. |
| 44 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified |
| 45 | M&L for new or previously untreated surface two coat aluminium paint over a coat of red oxide surfaces of any description, over 10cm in width or girth,not otherwise described all as specified and directed. |
| 46 | Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed |
| 47 | Removal of excavated material as soils exc 50M and not exceeding 100m and at a level not exceeding 1.5m above the starting point and depositing |
| 48 | M&L forHardcore (Broken stone boulders) of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15cmthick, watered and rolled/rammed to a true surface for Grenade throwing place all as specified and directed. |
| 49 | M&L for Hardcore (Broken stone boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surface Grenade throwing place all as specified and directed. |
| 50 | M&L Sand filling under floors or in foundations including watering and consolidation |
| 51 | Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed |
| 52 | Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on planin hard/dense soil and getting out all as spd. |
| 53 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as spd. |
| 54 | Cement concrete M-15 (Nominal mix) using 40 mm graded crushed stone aggregates for fixing Post (incl caps & bases) etc. |
| 55 | M&L for 75 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in flooring etc finished even and smoothw/o using extra cement. |
| 56 | Structural steel such as stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets, etc. complete. Fe 410-W (Gde E-250) quality A |
| 57 | M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S. |
| 58 | M&L for MS Screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm and n exc 22.5cm long and dia of sank 11 to 15 mm. |
| 59 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 60 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 61 | Boarding 2nd class hard wood, 20 mm th planed both sides, supplied & fixed with nails in any situation (except flooring and skirting) |
| 62 | S&F 1.6mm Mild steel plates, plain or chequered, 6mm thickness in available sizes with riveted or welded seams, including bending or turning up, mitred angles,sheeting is welded to frame and open and close in a sliding framing of window etc. as required Fe-290 (Gde E165) for prevent for obserber all as complete and specified. |
| 63 | M&L for 100 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in path etc finished even and smoothw/o using extra cement. |
| 64 | M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes. |
| 65 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25 mm thick , set, jointed and pointed in neat cement slurry as in floor/path etc with grey cement and pigments. |
| 66 | Cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregates as in surface channel and drains incl form work, complete all as spd. |
| 67 | M&L Brick work with sub class "B" bricks straight or curved on plan exc 6m mean radiuS built in CM 1:4 complte all as specified and directed. |
| 68 | Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd. |
| 69 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto. |
| 70 | M&L for Walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in CM 1:6. all as spd and directed. |
| 71 | M&L for 50mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in copingall as spd and directed. |
| 72 | M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 all as spd and directed. |
| 73 | Returning filling in soft /dense soil including spreading levelling watering and well ramming in layers n.exc 25cm in soil. |
| 74 | Excavation in trenches in soft/ disintegrated rock, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and as directed |
| 75 | Returning, filling in (soft/ disintegrated rocks), including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified |
| 76 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed |
| 77 | Formwork to sides rough finished surfaces of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed |
| 78 | M & L for M-25 (20 mm graded aggregate) reinfoced cement concrete (design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 79 | M & L for M-25 (20 mm graded aggregate) reinfoced cement concrete (design mix) in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 80 | S&F rolled mild steel Fe-410- W(Gde- E-250) quality-B framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified |
| 81 | Excavating in post holes (or similar holes) each not exc 0.5 Cum in any type of soil, getting out hard and dense , returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface. |
| 82 | Cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as spd. |
| 83 | Pre cast reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in precast post, fencing post, struts etc, crosssectional area exc 100 square centimetre and n.exc 250 square centimetre with or without chamfered angles and flat, splayed rounded or mitred top all as specified.(Note for item No 3 & 4 MS nibs to be provided for barbed wire at the time of casting shall be measured and paidseparately) all as shown in drawings. |
| 84 | Precast reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregate as in precast post, fencing post, struts etc cross sectional area n.exc 100 square centimeter with orwithout chamfered angles and flats, splayed rounded or mitred top for struts all as specified. |
| 85 | S&F Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts incl securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc all as specified. |
| 86 | M&L for FI clamps/straps including bolts/nuts for securing fencing post/struts etc including necessary drilling if required and similar small articles confirming to Fe-290 Gfe-E165 all as spd. |
| 87 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete. |
| 88 | M&L for point wiring using approved colour codingas per IS with stranded copper conductor single core 1.5 Sqmm (Nominal area), PVC insulatedcable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting concealed (Any type wall) PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories incl mild steel sunken boxes suitable formounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified |
| 89 | One light/Fan point controlled by one 5 Amps switch one way |
| 90 | One 3 pin socket point 5 Amp on independent board |
| 91 | One 3 pin socket point 5 Amp on same board with other switches. |
| 92 | All as per item No. 87.00 above but with 2.5 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 93 | Supply and fix Switch piano, flush button single pole, 6 Amps one way. |
| 94 | Supply and fix Switch piano, flush button single pole, 16 Amps one way. |
| 95 | Supply and fix Sokcet outlet, 2 in 1, flush type 6 Amp 2/3 pin muliti purpose |
| 96 | Supply and fix Socket outlet, 2 in 1, flush type 6/16 Amps 3/3 pin universal multipurpose |
| 97 | Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan. |
| 98 | Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVCblocks. |
| 99 | S&F in replacement LED tube light fitting of20 watts 6000K, 230 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed by Engr-in-charge. |
| 100 | Supply and fix in replacement Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed.NOTE ; 3 THREE RUN MEASURED AS ONE RUN . |
| 101 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. |
| 102 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. |
| 103 | Supply and fix MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity |
| 104 | Supply and fix MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity |
| 105 | Supply & fixceiling fanscomplete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated including J hook for fixing to roof and provinding conneciton to ceiling rose |
| 106 | Supply & laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured wit galvanised steel wire or tape and overall PVC sheathed 16 Sqmm nominal cross section, 2 core, stranded conductor, in service connections |
| 107 | Supply and Laying Bricks old size sub class "B", of class designation 10, for the protection of cable laid flat dry across the cable complete all as specified. |
| 108 | Tubes, light grade, galvanised 40 mm dia with all fittings laid in trenches or fixed on walls etc |
| 109 | M&L, Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thickburied directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4mm dia by means ofof nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified. |
| 110 | Amount of credit of Rs. 6441.80 for retrieved old material as mentioned in Schedule "A" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
