|
| 1 | ERRECTION OF 22KV H.T LINE |
| 2 | Erection of pole.Digging of pit,(ii) Laying of RCC muff (iii) Drilling of holes in X-bracing set, X-arms (iv) Erection of pole (v) fixing of insulator,X-arm, X-bracing set, (vi) fixing of Barbed wire, Danger plate (vii) filling of pit & Ramming i/c painting of pole D/Pole str. (Complete in all respect). |
| 3 | Digging of pit (ii) Laying of RCC muff (iii) Drilling of holes in X-bracing set, X-arms (iv) Erection of pole (v) fixing of insulator,X-arm, X-bracing set, (vi) fixing of Barbed wire, Danger plate (vii) filling of pit & Ramming i/c painting of pole Single/Pole str. (Complete in all respect). |
| 4 | ERRECTION OF STAY SET |
| 5 | (i) Digging of pit (ii)fixing of stay rod (iii) Filling of pit (iv)Nozzeling & Tighting. |
| 6 | ERRECTION OF EARTHING |
| 7 | (i) Digging of pit (ii) fixing of G.I wire to the earth system, filling of pit. |
| 8 | Sagging ofACSR Conductor 6/1/3.35mm (Single wire). |
| 9 | Laying of conductor (i) stringing & sagging (ii) binding with insulator. |
| 10 | Sagging of G.I Wire for earth wire (Laying of conductor, stringing & sagging only.) |
| 11 | Erection of 22kV GO Switch. |
| 12 | Erection of 25KVA S/Stn. |
| 13 | Digging of pit for pole and earthing, drilling of holes in x-arm, preparation of plate form, Str. MemberC.I A.I. X-arm, knee bracing set, erection of D-pole, c.c.muff, erection of plate form, erection of x-arm, dropout fuse unit, lightning arrester, MCCB switch, L.T box, energy meter, erection of transformer, G.O switch, stay set, jumper earthing 3 sets, L.T cables, paintingetc. (Complete in all respect). |
| 14 | Providing Fencing around the Sub-station. |
| 15 | Earth work in excation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within lead of 50m(All kind of Soil). |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, led up to 50m and lift upto 1.5 m. |
| 17 | Structural Steel work reveted, bolted or welded in built up sections, trussses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Such as tees, angles, chanels and RS ioists,Flats exceeding 10mm in thickness,Mild Steel plates, Mild steel rivets etc. |
| 18 | P/L in position CC of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:2:4(1Cement:2Coarse Sand:4Graded stone aggregate 20mm nominal size). |
| 19 | Centering and Shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns. |
| 20 | Providing and fixing G.I. (made of G.I. wire of 4mm) chain link fabric fencing of required width in mesh size 50X50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge |
| 21 | ERRECTION OF L.T LINE ON 9Mtr. Long S.T pole. |
| 22 | (i) Digging of pit, Laying of RCC muff,Drilling of holes in poles.Erection of pole,Erection of shackle insulator, filing of pit and ramming, Painting of pole. (Complete in all respect). |
| 23 | ERRECTION OF STAY SET |
| 24 | Digging of pit, fixing of stay rod, filling of pit, Nozzeling & Tighting.) Complete in all respect. |
| 25 | ERRECTION OF EARTHING SET |
| 26 | Digging of pit, fixing of GI wire to the earthing system, Filling of pit. |
| 27 | SAGGING OF ACSR CONDUCTOR 6/1/2.59mm (Single wire). |
| 28 | Laying of conductor, stringing & sagging, Binding with insulator (only). |
| 29 | Sagging of G.I Wire for earth wire. |
| 30 | MATERIAL TO BE SUPPLIED BY CONTRACTOR (Subject to the non-availability of material at Divisional Store). |
| 31 | Prov. Cross Arm: [Channel Iron (100x50x6 mm),Length (2800) mm. |
| 32 | Prov. Cross Arm: [Channel Iron (100x50x6 mm),Length (1800) mm. |
| 33 | Prov. Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more (with flat and spring washers)] |
| 34 | Prov .Shakle Insulator (16KN) |
| 35 | Prov .D-Iron (U-Clamps) |
| 36 | Prov. Aluminium paint. |
| 37 | Prov. Stay clamp |
