Construction Of Office Building For Executive Engineer At Tato
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Mar 2024
0 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shi Yomi → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building For Executive Engineer At Tato
BOQ
| Sl. No. | Item Description |
| 1 | 1.00 SH:- DEVELOPMENT OF SITE |
| 2 | Excavation in Ordinary Rock with Dozer with lead upto 100 metres (Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.) |
| 3 | 2.00 SH:- BUILDING WORKS |
| 4 | Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.a) Ordinary Soil |
| 5 | b) Hard Soil |
| 6 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 7 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 8 | Dry rubble Flooring |
| 9 | Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 10 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :b)in walls etc. |
| 11 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 12 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 14 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 15 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 16 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers bands and facias up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding the 6 mm to give a smooth and even surface but excluding the cost of centering, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 fine sand : 4 stone aggregate 12.5 mm nominal size). |
| 17 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 18 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 19 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 20 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 21 | e) Column, pillars, posts and struts etc. |
| 22 | f) Stairs (excluding landings) except spiral stair cases. |
| 23 | g)Vertical and horizontal fins individually or forming box louvers bands and facias. |
| 24 | Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars. |
| 25 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
| 26 | Half brick masonry in superstructure above plinth level and up to floor two level. |
| 27 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 28 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 29 | Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.a) 40 mm thick including anodized aluminum butt hinges with necessary screws. |
| 30 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws.a) 35 mm thick |
| 31 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
| 32 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.a) Best local approved quality wood. |
| 33 | Extra for making chamfered edges of beading. |
| 34 | Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.a) Timber class - A IV |
| 35 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 36 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 37 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.a) 300 x 10 mm |
| 38 | c) 150 x 10 mm |
| 39 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a) 125 mm |
| 40 | Providing and fixing MS Hooks and Eyes.c) 200 mm |
| 41 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 42 | Providing and fixing iron pressed butt hinges bright finished with necessary screws etc complete.a) 125 x 65 x 2.12 mm |
| 43 | c) 75 x 47 x 1.70 mm |
| 44 | Providing and fixing 50 cm long aluminum kicking plate 100 x 3.15 mm anodised, transparent or dyed to required color or shade with necessary screws etc complete. |
| 45 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 46 | Pre-cast terrazzo tiles 20 mm thick with marble chips of sizes upto 6 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry including rubbing and polishing complete with tiles of :a) Light shades using white cement |
| 47 | Extra,if terrazzo tiles are laid in treads of steps not exceeding 30 cm in width. |
| 48 | Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete:c) Dark shade using ordinary cement |
| 49 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or/and residual bitumen applied hot @ 1.45,1.20 & 1.45 Kg. per Sq.m. of area respectively, second & fourth courses of roofing felt type-3 grade-I (hessian base finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per Sq.m. including preparation of surface excluding grading complete. |
| 50 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.a).63 mm thick GI sheet |
| 51 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. b) 0.63 mm thick GI sheet |
| 52 | 12 mm cement plaster 1 : 6 (1 cement : 6 fine sand). |
| 53 | 20 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 54 | Neat cement punning. |
| 55 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 56 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 57 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 58 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 59 | Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 60 | Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand). |
| 61 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 62 | WATER SUPPLY AND SANITARY FITTINGS |
| 63 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 64 | b) 20 mm nominal bore |
| 65 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 15 mm nominal bore |
| 66 | b) 20 mm nominal bore |
| 67 | c) 32 mm nominal bore |
| 68 | Providing and fixing brass bib cock of approved quality.a)15 mm nominal bore |
| 69 | Providing and fixing brass stop cock of approved quality.a) 32 mm nominal bore |
| 70 | Providing and fixing brass full way valve with wheel of approved quality.a) 32 mm nominal bore |
| 71 | Providing and fixing non-return valve of approved quality.b) 32 mm nominal bore |
| 72 | SANITARY INSTALLATION |
| 73 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 74 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.a) 100 mm dia SW pipes |
| 75 | Providing and fixing 12.5 litres high level CI flushing cistern of approved make with integral fittings such as ball valve, bell, lever, GI chain and pull complete. |
| 76 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.a) One urinal basin with 5 Litres CI automatic flushing cistern |
| 77 | Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.a) WC pan with white plastic seat and lid. |
| 78 | Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.a) 250 x 130 x 30 mm |
| 79 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.b) Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality. |
| 80 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
| 81 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 82 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).a) 750 x 20 mm size |
| 83 | Providing and fixing toilet paper holder.a) CP Brass |
| 84 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.c) 50 mm dia |
| 85 | Providing and fixing sand cast iron heel rest sanitary bend.a) 100 mm dia |
| 86 | Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.a) 100 x 100 x 100 mm |
| 87 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.c) 100 mm inlet and 50 mm outlet |
| 88 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).b) 100 mm diameter pipe |
| 89 | Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc.b) 100 mm diameter |
| 90 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).(C) CI Plain shoes :b) 100 mm diameter |
| 91 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 92 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 93 | InternalElectrification :- |
| 94 | SUB-HEAD-1 (WIRING) |
| 95 | Wiring for light point with 1.5 sqmm PVC insulated copper conductor cable in caping-casing as reqd.a) Short Point |
| 96 | b) Medium Point |
| 97 | c) Long Point |
| 98 | Wiring for Fan point with 1.5 sqmm PVC insulated copper conductor cable in caping-casing as reqd.a) Medium Point |
| 99 | Wiring for 3 Pin 5 Amp. Plug point with 1.5 sqmm PVC insulated copper conductor cable in caping-casing I/c providing and fixing connector for terminating the wires, earth wires inside the switch board as reqd. |
| 100 | Wiring for 3 Pin 15 Amp. Plug point with 4 sqmm PVC insulated copper conductor cable in caping-casing I/c providing and fixing 3 Pin 15 Amp socket outlet and 15 amp piano switch, earthing the 3 pin etc. as reqd.a) Extra long point -I |
| 101 | b) Extra long point -II |
| 102 | Wiring for circuit wiring with 2.5sqmm PVC insulated copper conductor cable in caping casing as reqd. |
| 103 | Wiring for Sub-Main with 6sqmm PVC insulated copper conductor cable in caping casing as reqd. |
| 104 | SUB-HEAD-II (FITTINGS & ACCESSORIES) |
| 105 | Supplying/Fixing of Bulk head fitting suitable for 100 Watt. Lamp complete with all accessories i/c connection. |
| 106 | Ceiling rose |
| 107 | Supplying/Fixing of \"L\" type bracket complete with brass holder. |
| 108 | Provd. And fixing electronic fan regulator |
| 109 | Pvdg. And fixing special CFLtube 20Watt Philips make . |
| 110 | Supplying & Installation testing and commissioning of ceiling fan and regulator i/c wiring downward of standard length (30 CM) etc.as reqd. |
| 111 | Supplying & fixing of 40 mm dia G.I.Pipe for hanging of ceiling fan etc.as required |
| 112 | SUB-HEAD-III (DB\"s AND MAIN SWITCH) |
| 113 | Pvdg. And fixing 63 amps Metal clad SP&N switch fuse unit 240/250 V rewirable fuse i/c drilling holes on the board connection earthing the body etc. as reqd.(Cat\"B) |
| 114 | Pvdg. And fixing 32 amps SP&N HRC type main switch suitable for 230V single phase AC supply. |
| 115 | Pvdg. And fixing 16 amps SP&N HRC type main switch suitable for 230V single phase AC supply. |
| 116 | Pvdg. And fixing 4 Way MCDB suitable for 230V single phase AC supply. |
| 117 | Pvdg. And fixing 3 phase 3 wire energy meter with CT 100/5, suitable for operation on 415V, 50Hz AC supply. |
| 118 | Pvdg. And fixing 300mmx400mmx50mm wooden board fixed with 3mm bakelite sheet of ivory/white on all side to accomodated TP&N and SP&N switches |
| 119 | 100 Amps Main switch |
| 120 | SUB-HEAD-IV (EARTHING) |
| 121 | Earthing wire copper earth plate of size 600mmx600mmx3mm thick I/c accessories and providing necessary enclosure with copper plate having locking arrangement and watering pipe etc. |
| 122 | Extra for coal and salt for copper plate earth electrode as reqd. |
| 123 | Provdg. and fixing 25x4mm copper strip for earthing |
| 124 | Supplying & drawing 2.4 mm dia Al.Conductor wire for loop earthing in the existing surface recessed caping casing along with other wires as reqd. |
| 125 | SUB-HEAD-V (SERVICE CONNECTION) |
| 126 | Supplying & Fixing 18\"x12\" wooden board i/c varnishing of the both side as required. |
| 127 | SH: Septick Tank |
| 128 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 129 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 130 | Half brick masonry (with best available local bricks)in cement mortar 1:3 (1cement : 3 coarse sand) in foundation and plinth. |
| 131 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 132 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 133 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete |
| 134 | b)Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 135 | Reinforcement of RCC work including bending, binding and placing in position complete.a) Mild Steel |
| 136 | 15 mm cement plaster 1 : 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall. |
| 137 | Neat cement punning. |
| 138 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.A) 100 mm dia. |
| 139 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design |
| 140 | Add Carrige |
AI Tender Summary
Tender Timeline
Mar 14, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender