Tender For Repair And Maintenance Of Equipment At Water Supply Scheme Danastan Magam Under M And R, Sopore-Jammu And Kashmir

Tender For Repair And Maintenance Of Equipment At Water Supply Scheme Danastan Magam Under M And R-1. Repairs To Submersible Motor With Rating 15Hp. Dismantling Of The Submersible Motor At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items. 1.1 Copper Wire Used In Rewinding The Motor. 1.2 Associated / Consumable Items Like Crimpled Paper, Sleeves, Pvc Paper, Bamboo Sticks, Thread, Varnish Etc. 1.3 Providing And Fitting Of Ball / Thrust Bearing ( De & Nde ) For Different Capacity Motors And Pumps No. 6309 2. Providing, Fitting And Testing Of Submersible Copper Cables ( 10 Sqmm ) Including Extraction Of Damaged Ones, Transportation, Loading, Unloading, Fitting And Successful Testing On No And Full Load At Site. 3. Fabrication, Providing, Fitting And Lowering Of 80 Mm Dia Class B Flanged Ms Coated Column Pipes 04 No Each Of 3.048 Meter Length ( 10 Ft ) . The Job Includes Cost Of 12 Mm Thick Ms Flanges And Pn 16 And Welding In Two Layers To Make It Leakproof With Further P / F Of Cleats, Cable Groove And Slots In Each Flange. The Job Also Includes P / F Of Nuts, Bolts And 80 Mm Rubber Gaskets. 4. Providing And Fitting Of Ms Split Type Clamps 10 Mm Thick, Length As Per Casing / Sump Opening ( 3 Inch Dia ) 5. Providing And Fitting Of Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) 80 Mm As Per Is 5312 By Way Of Cutting Of Hot Dip Galvanized G.I, B-Class Pipe Across The Section By Dint Of Pipe Cutter / Gas Cutter. The Job Also Includes Providing And Welding Of M.S Flanges To The Two Ends Of Pipe. The Thickness Of Flange Conforming To Is 6392 Part 1St Table-17. The Flange Welding Carried Out In Double Layers To Form Strong Welding Joint By Dint Of Dc Arc Welding. The Job Further Includes Providing And Fitting Of Nuts And Bolts ( Conforming To Is:1363 Part 1St ) And Rubber Insertion Gaskets. ( For Dismantling Joints ) Nominal Dia - 80 Mm 6. Providing And Fitting Of Flange Rubber Gasket At Site Including Dismantling, Fitting And Successful Testing ( Size 80 Mm ) 7. Providing And Fitting Of M26 Ms Nuts Along With Bolt As Per Sample. 8. Providing And Fitting Of Flood Light 50 Watt With 0.9 Power Factor Of Reputed Make.

INR 200 /-

INR 3791.0 /-

INR 1.89 Lakhs /-