Tender For Supply Of Furniture Forcafeteria In Faculty Development Centre At Maharshi Dayanand University, Rohtak-- 1 Cafeteria 4 Seater Tableproviding And Placing 4 Seater Membrane Top Table Size Shall Be1135 Width Mm X 1175 Depth Mmx 750 Height Mm. Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board. Pvc Membrane Foil On Top 8X2 Mm Deep Groove On Centre Of The Table As Graphics. Specially Profiled Edge To Prevent Striping Of Foil & Comfortable Touch. Brown Laminate On Bottom Surface. The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated. Pipe Dia 38 Mm, 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws. Legs Shall Be Of Ss And 38 Mm Dia Pipe Legs Are Fixed With Inderstructure And Table Top. Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking .The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Gold Ul, Greenpro Certification And Bifma 10 Years Membership Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem / Bidder Should Have Completion Of All Mentioned Products. In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Furniture Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 2 Cafeteria Round Table Providing And Placing In Position Round Table With Overall Size Of 900Mm Diax 700Mm ( H ) .Worktop Shall Be Made Of 25Mm Mdf Osr With Pvc Memberane On Top Side.Understructure Should Consists Of An Innertube Assembly With Top Plate For Worktop Mounting & An Outer Tube Assembly With Round Bottom Plate. The Inner & Outer Tube Assemblies Are Telescopically Connected. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) . The Inner Tube Assembly Is Made Of 082.5 X 2Thk Round Electric Resistance Welded Tubes ( Erw ) ( As Per Is:7138 ) And 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) Welded Together Using Tungsten Inert Gas Welding. The Outer Tube Assembly Is Made Of 0.89 X 2.5 Thk And Round Electric Resistance Welded Tubes ( Erw ) ( As Per Is:7138 ) And 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epdxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Has A Knock-Down Construction. It Is Assembled Using Alloy Steel Hardware ( Blackened & Coated With Rust Preventive Oil ) .The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Gold, Greenpro Certification And Bifma 10 Years Membership Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem / Bidder Should Have Completion Of All Mentioned Products. In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Furniture Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 3 Cafeteria Chair Ss Understructureproviding And Placing Multipurpose Chair Where The Seat And Back Are Made Up Of Injection Moulded High Impact Strength Polypropylene Polymer With Indoor Gate Uv Resistance. Product Shall Be Greenguard Gold, Green Pro, Indoor Advantage Gold, Griha & Svagriha And Bifma Level 2 Certified. The Dimensions Of Back Shall Be 51.6Cm. ( W ) X 40.5Cm. ( H ) And Of Seat Shall Be 52.5Cm. ( W ) X 53.2Cm. ( D ) . The Powder-Coated ( Dft 40-60 Microns ) Frame Structure Shall Be Made Of 3.5±0.03Cm X 1.5±0.03Cm X 0.16±0.0128Cm Thk M.S. E.R.W.Tube And Welded Connecting Tube Made Of Dia 2.22±0.03Cm X 0.16±0.0128Cm Thk M.S. E.R.W. Square Tube To Form The Mainframe Assembly. The Shoes Are Made Of High Impact Strength Polypropylene Polymer Compound With Indoor Grade Uv Resistance And Pressed Fitted With Tubular Frame. The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Ul, Bifma Level2 & Min 10 Years Membership And Indoor Advantage Gold Certification.In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Oem / Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 4 Vip Area - Free Standing Tableproviding And Placing In Position Multipupose Table Of The Following Specifications. The Overall Dimensions Of The Table Shall Be 1500 X 750 X 750Mm. The Product Shall Be Greenguard Ul Certified. Table Top Shall Be Made From 25Mm Thick Mdf Osr Board With Pu Coating On Top Side. Legs Are Made By Welding The Combination Of Ms Erw Round Tube Of Dimater 63.5Mm X 2Mm Thick. Flamges Of 1.6Mm Thick Crca And 1.2Mm Thick. Insde Platew Are Made From Hr 5Mm Thick Sheet. Assembly Is Epoxy Polyester Powder Coated. Table Top Folds Upside At Offset Center Pivot Provided On Support Bracket Which Is Aluminium Alloy Pressure Die Cast Part Coated With Epoxy Olyester Powder Caoted Min. 40 Microns. Table Top Connected With Spring Loaded Mechanism With Membranell Handle Made Of Sandwich Tubes Of Ms Erw 1.2Mm Thick And 1.6Mm Thick Tubes. Coated With Epoxy Polyester Powder Coated Min. 40 Microns. Legs Are Provided With Casters Of 65Mm Diameter Loackable Type For Ease Of Movement And Can Be Locked When Required At Any Position.The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Ul, Bifma Level2 & Min 10 Years Membership And Indoor Advantage Gold Certification.In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Oem / Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 5 Vip Sitting Area - Square Tableproviding And Placing In Position Square Table With Overall Size Of 900Mm X 900Mm With 700Mm ( H ) .Worktop Shall Be Made Of 25Mm Mdf Osr With Pu Matt Finish On Top Side. Hardness On Top Surface Should Be 2H.Understructure Should Consists Of An Innertube Assembly With Top Plate For Worktop Mounting & An Outer Tube Assembly With Round Bottom Plate. The Inner & Outer Tube Assemblies Are Telescopically Connected. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) . The Inner Tube Assembly Is Made Of 082.5 X 2Thk Round Electric Resistance Welded Tubes ( Erw ) ( As Per Is:7138 ) And 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) Welded Together Using Tungsten Inert Gas Welding. The Outer Tube Assembly Is Made Of 0.89 X 2.5 Thk And Round Electric Resistance Welded Tubes ( Erw ) ( As Per Is:7138 ) And 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epdxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Has A Knock-Down Construction. It Is Assembled Using Alloy Steel Hardware ( Blackened & Coated With Rust Preventive Oil ) Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 6 Vip Sitting Area - Chair Providing And Placing In Positon Lounge Chair With Overall Size Of 635 Mm ( W ) X 630 Mm ( D ) X 800 Mm ( H ) And Seat Height Of 455Mm. The Seat-Back Shall Be Made Of 15Mm Plywood ( As Per Is:503 ) Panels Connected Using Brackets Made From 3Mm Hot Rolled Steel Plates ( As Per Is:2062 ) Powder Coated In Epoxy Polyester ( Dft 40-60 Microns ) , 25Mm Pu Slab-Stock Foam Is Pasted Onto The Both Sides Of The Shell And Pinched Together To Achieve The Radius Along The Periphery. The Seat Cushion Is Made Using 50Mm Pu Slab-Stock Foam And Upholstred In Leatherette. The Understructure Is Made Of Fsc-Certifed Seasoned Teakwood Finhised With Clear Matt Coat Of Pu Lacquer. Shell Is Fined To The Understructure Using Alloy-Steel Hardware ( Blackened And Coated With Rust Preventive Oil ) .The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Gold, Greenpro Certification And Bifma 10 Years Membership Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem / Bidder Should Have Completion Of All Mentioned Products. In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Furniture Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 7 Vip Sitting Area - Lounge Sofa Providing And Placing In Position Godrej Or Equivalent Model Of Haworth, Steelcase, Herman Miller Sofa For Teachers Lounge With Overall Size Shall Be 1500 W Mm X 705 D Mm X 790 H Mm. Seat Understructure Shall Be Made Of Using Combination Of 12 Mm Plywood Vertical Panels & Pine-Wood Longitudnal Members. 2Mm Thick Kraft Board Shall Be Stapled On The Front Side For Foam Sticking Surface. Seat Shall Be Made Of 100 Mm Pu Slab Stac Foam Pasted On The Seat Ply. 2 Mm Pu Slab Stack Foam Shall Be Pasted On The Front & Sides. The Sofa Shall Be Provided With 2 Nos. Of 6A Electrical Sockets Ith Individaul Switches. The Electricals Shall Be Safely Housed In A Box Mounted On Pinewood Ection Within The Seat & Power Hall Be Supplied Through 1.5 Mtr Arc Cord With Ceramic Fuse. The Back Understructure Shall Be Made Of 12 Mm Plywood Vertical Panels & Pine-Wood Longitudnal Members. 2Mm Thick Mdf Board Shall Be Stapled On The Front Side For Foam Sticking Surface. Back Shall Be Made With 50 Mm Pu Slab Stack Foam, While 12Mm Pu Slab Stck Foam Shall Be Pasted Along The Sides & Back. The Back Shall Be Upholstered With Fabric. The Legs Shall Be Made Of Using Seasoned Teak Wood Finished With A Clear Matt Coat Of Pu Lacquer.The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Ul, Bifma Level And Indoor Advantage Gold Certified Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 8 Vip Sitting Area - Lounge Tableproviding And Placing In Position Square Table With Overall Size Of 900Mm X 1200Mm With 720Mm ( H ) .Worktop Shall Be Made Of 25Mm Mdf Osr With Pu Matt Finish On Top Side. Hardness On Top Surface Should Be 2H.Understructure Should Consists Of An Innertube Assembly With Top Plate For Worktop Mounting & An Outer Tube Assembly With Round Bottom Plate. The Inner & Outer Tube Assemblies Are Telescopically Connected. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) . The Inner Tube Assembly Is Made Of 082.5 X 2Thk Round Electric Resistance Welded Tubes ( Erw ) ( As Per Is:7138 ) And 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) Welded Together Using Tungsten Inert Gas Welding. The Outer Tube Assembly Is Made Of 0.89 X 2.5 Thk And Round Electric Resistance Welded Tubes ( Erw ) ( As Per Is:7138 ) And 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epdxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Has A Knock-Down Construction. It Is Assembled Using Alloy Steel Hardware ( Blackened & Coated With Rust Preventive Oil ) . Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 9 Vip Sitting Area - Free Standing Open Shelf Unit 1200X470x1035h With Planterproviding And Placing In Position Free Standing Table Open Shelf Unit Without Door With Overall Size Of 1200Mm X 470Mmx 1035Mm With 720Mm ( H ) . Planter Should Be Placed On Top Of The Unit With Size Of 1200X470x225h. Worktop Shall Be Made Of 25Mm Prelam Top Where Cabinet Should Be Made Of Metal Powder Coated Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 10 Counter Area - Hi Stoolproviding And Placing In Positon High Stool For Counter Area With Overall Size Of 486 Mm ( W ) X 470 Mm ( D ) X 739 Mm ( H ) .The Seat Cushion Is Made Using 25Mm Pu Slab-Stock Foam And Upholstred In Leatherette. The Understructure Is Made Of Fsc-Certifed Seasoned Teakwood Finhised With Clear Matt Coat Of Pu Lacquer. Shell Is Fined To The Understructure Using Alloy-Steel Hardware ( Blackened And Coated With Rust Preventive Oil ) .The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Gold, Greenpro Certification And Bifma 10 Years Membership Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem / Bidder Should Have Completion Of All Mentioned Products. In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Furniture Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 11 Service Area - Hi Tableproviding & Plaacing In Position Hi Table With Overall Size Of 1500X750x1040mm.The Product Shall Be Greenguard By Ul, Green Pro, Bifma Level 2 Certified, Indoor Advantage Gold And Griha Certified. Understructure: Comprising Of Metal Powder Coated Cross Connectors Between Legs And Legs. Made Up Of Metal Powder Coated Finish And The Entire Assemply Is Fixed To The Worktop. Worksurface Made Out Of 25 Mm Thk Mdf Board With Flat Pvc Lipping Edge Banding. The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Gold, Greenpro Certification And Bifma 10 Years Membership Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem / Bidder Should Have Completion Of All Mentioned Products. In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Furniture Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge. 12 1 Seater Sofa Leatherette Upholsteryproviding And Placing In Place Of 1 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 860W X 901D X 847H. The Seat Should Bemade Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg / Cu. Seat Should Be Upholstered With Leatherette. 2 ) Back Foam: The Back Should Bemade Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Leatherette. Understructure Should Bemade Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood ( Which Also Shall Be Resistance And Termite Proof As Per Is:303. ) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. Leg Assembly : It Should Be A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. The Bidder / Oem Shall Be Iso 9001, Iso 14001, Iso 45001, Greenguard Gold, Greenpro Certification And Bifma 10 Years Membership Certification And Must Have Inhouse Manufacturing Of All The Products Of Said Requirement. Oem / Bidder Should Have Completion Of All Mentioned Products. In Case Of Authorized Dealer, Completion Certificates Of Execution Of Similar Works By Manufacturers & Other Credentials Are Also Valid For Similar Work Experience Provided A Consent Letter Is Given By Furniture Manufacturer Complete In All Respect To The Entire Satisfaction Of Engineer-In-Charge.
