Bharat Sanchar Nigam Limited-BSNL has published Tender For Repairing Of Internal Water Leakage On Wall ,Toilet , Roof And Other Minor Civil Repair Works In Door Sanchar Bhawan, Balangir.. Submission Date for this Tender is 21-03-2024. Toilet Bathroom Tenders in bolangir Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SH:DISMANTLINGAND DEMOLISHING |
| 2 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge |
| 3 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 4 | 100mm dia pipe |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | SH: CONCRETE WORK |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 9 | 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 10 | SH : FLOORING |
| 11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 12 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | SH:ROOFING |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
| 15 | 110mm Single socketed pipes. |
| 16 | SH : FINISHING |
| 17 | White washing with lime to give an even shade : |
| 18 | Old work (one or more coats) . |
| 19 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : |
| 20 | One or more coats on old work. |
| 21 | Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturer"s specification. |
| 22 | One or more coats on old work. |
| 23 | SH : REPAIR TO BUILDINGS |
| 24 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 25 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 26 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 27 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 28 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 29 | (a) Internal Work- Exposed on wall |
| 30 | SH : SANITARY INSTALLATION |
| 31 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 32 | W.C. pan with ISI marked white solid plastic seat and lid |
| 33 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 34 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 35 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 36 | 10 litre capacity - White |
| 37 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 38 | White solid plastic seat with lid |
| 39 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 40 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 41 | 40 mm dia |
| 42 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 43 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 44 | SH : WATER SUPPLY |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 46 | 15 mm nominal outer dia. Pipes. |
| 47 | 20 mm nominal outer dia. Pipes. |
| 48 | 25 mm nominal outer dia .Pipes. |
| 49 | 40 mm nominal outer dia. Pipes. |
| 50 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 51 | 15 mm dia. nominal bore |
| 52 | 20 mm dia. nominal bore |
| 53 | 25 mm dia. nominal bore |
| 54 | 32 mm dia. nominal bore |
| 55 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 56 | 30 cm length 15 mm nominal bore |
| 57 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 58 | 15 mm nominal bore, 165 mm long. Weighing not less than 110 gms. |
| 59 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 60 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 61 | Concealed stop cock, 15 mm nominal bore, 108mm long. Weighing not less than 108 gms. |
| 62 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 63 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 64 | SH: MARKET RATED ITEMS |
| 65 | Providing and fixing SWR PVC Soil, Waste and Vent pipes of SKIPPER, SUPREME, ASHIRVAD or equivalent make conforming to IS:13592 (Type-B) including jointing with seal ring conforming to IS:5382 or solvent cement as per site condition including testing of joints etc. complete as per direction of Engineer-in-Charge. |
| 66 | 100 mm dia pipe |
| 67 | Deduction for taking into possession of dismantled damaged unserviceable material in all complete as per directiion of Engineer-in-charge. |
| 68 | CP Brass/ brass bib cock / stop cock/pillar cock/ angle valve etc. |
| 69 | 15 to 65 mm nominal bore G.I pipes |
| 70 | Providing and fixing PVCgate valveof approved quality . |
| 71 | 25 mm nominal bore |
| 72 | 40 mm nominal bore |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
