Tender For Procurement Of Additional Furniture For Bhel Sadan At Bhel Complex, Plot No.25, Sec-16A, Noida (Up), noida-Uttar Pradesh

Procurement Of Additional Furniture For Bhel Sadan At Bhel Complex, Plot No.25, Sec-16A, Noida (Up) , L- Shape Workstation (L1500/1500 X D600 X H750mm) + Metal Pedestal Unit:-As Per Below Specs. (Manufacturers Warranty- 5 Years) Partition Based Workstation With Hollow Partition Of 69-75Mm Thickness. Partition Is Tile Based Aluminium Framesof69-75Mmthickness Of Height 1200Mm-1230Mm Made Of 1.2 - 1.25 Mm Thick Aluminium Profiles Epoxy Powder Coating Including Skirting Of 100-150Mm Highwith Leveller And Have 45-50Mm Clear Space Between Two Tiles For Wire Management Facilities. Aluminium Parts Shall Have Epoxy Powder Coating Min 45Microns. Cover Section (Raceways) Coming Above/Below The Worktop 85-100Mm Height Made Up Of 0.7-1.0Mm Thick Zinced /Crca Powder Coated Steel And The Worktop 1500X1500mm In One Piece Is Made Of 25 Mm Thick E 1-Grade / Green Prelaminated Particleboard Of Approved Shade Supported By 1.2Mm-2Mm. Thick, Epoxy Powder Coated Steel Brackets. All Flat Edges Shall Be Finished With Hot Melt Pvc Edge Banding Of 2Mm Thickness On User Side And 0.8Mm Thick On Other Sides. Fabric Tiles Along With One Glass Marker And One Magnetic Pinup Tile Shall Be Provided For Each User Above The Work Surface And Metal Powder Coated Tiles Below The Worktops. All Worktops Are Closed With 25 Mm Thick E 1-Grade / Green Prelaminated Particleboard Gable End Of Approved Shade Supported By 1.2Mm-2Mm. Thick, Epoxy Powder Coated Steel Brackets On Both Sides. Trims: Extruded Aluminium, Epoxy Powder Coated Colour Of Min 45Microns Thickness . Each Workstation Has A 3 Drawer ( 2 Drawer + 1 Filing )Mobile Pedestal (Metal) Unitof Size 450 Width. Height 640-680Mm Anddepth 500Mm, Lockable With Keys. Front And Body:0.7 /0.8Mm. Powder Coated Steel. Castors: 2 Front Lockable Castors & 2 Std Castors. Item Is Inclusive Of Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing. , Dgm Workstation - As Per Below Given Sizes & Metal Pedestal Unit. Main Table(750 Mm High & 750Mm Wide): Top: 25 Mm. Thick Particle Board (E1-Grade) Clad With 0.6Mm Thick Post Formed Laminate With Flat Edge Duly Sealed With 2Mm Thick Pvc Edge-Banding: 2 Mm. Pvc Edge-Banding Modesty:18Mm Thick Particle Board (E-1 Grade / Green). Gable:25 Mm. Thick Pre-Laminate Particle Board (E1-Grade / Green). Edge-Banding 2 Mm Pvc Edge-Banding . Height Adjustable Levellers In Gable End . Side Table (750Mm High & 500Mm Wide) :25 Mm. Thick Particle Board (E1-Grade / Green ) Clad With 0.6Mm Thick Post Formed Laminate With 0.4Mm Backing Laminate With Flat Edge Duly Sealed With 2Mm Thick Pvc Edge-Banding. Main Table And Side Table Joint Is Male /Female Joint For Neat Finishing Without Any Gap At Joining Of 2 Post Formed Worktops. Back Console(750Mm High & 400Mm Wide) :25 Mm. Thick Particle Board (E1-Grade / Green ) Clad With 0.6Mm Thick Post Formed Laminate With 0.4Mm Backing Laminate With Flat Edge Duly Sealed With 2Mm Thick Pvc Edge-Banding. Side Table And Back Console Joint Is Male /Female Joint For Neat Finishing Without Any Gap At Joining Of 2 Post Formed Worktops. Back Console Shall Be Inclusive Of Storage Shelves And Shutters ( Prelaminated) With Necessary Edge Banding In 18Mm Thk. & Supporting Hardware.(Handles & Hinges) Mobile Pedestal: 3 Drawer ( 2 Drawer + 1 Filing )Mobile Pedestal (Metal) Unitof Size 450 Width. Height 640-680Mm Anddepth 500Mm, Lockable With Keys. Front And Body:0.7 /0.8Mm. Powder Coated Steel. Castors: 2 Front Lockable Castors & 2 Std Castors. Item Is Inclusive Of Front Table, Side Table, Back Console, Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing. Length - M.T.1650 Mm, S.T. 1000 Mm, B.C.1650Mm (Manufacturers Warranty- 5 Years) , Agm Cabin Table : Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Table ,(As Per Finally Approved Sample By Department) Of Following Dimensions With The Following Specifications. (Manufacturers Warranty- 5 Years) Cabintable Top And Under Structure Should Be Made Of Minimum 25Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). The Height Of Table Top Shall Be 740-760 Mm From Ground Level. The Particleboard Should Bee-1 Gradewith Pvc Edge Banding.Understructure :Melamine Legs Made Ofminimum 25Mm Thick Particle Board. The Exposed Edge Of Worktop Shall Be Secured With 1.5 Mm-2 Mm Thick Pvc Edge Banding Tape Of Approved Colour. The Modesty Panel Should Be Provided With 19 Mm Thickmade Of Particle Board Wood Grade E-1 (Environmental Friendly) Thickness 25 Mm. ,Cover With Melamine. The Height Of Modesty Panel Should Be 600Mm. Each Table Should Have 3 Drawer Pedestal Made Of25mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). All Hardware Shall Be Of Approved Make. Wiremanagemnet : Wire Management Through Flat Top Matching With Table Top Finish. Providing And Fixing Low Height Storages , Body (Top, Side & Back) Of Storages Should Be Made Out Of 19 Mm Thick E1 Grade Particle Board With 2Mm Thick Pvc Edge Banding& Only Top Thickness Is 25Mm Thick, Shelf Of Storages Should Be Made Out Of 16 Mm E1 Grade Particle Board With 2Mm Thick Pvc Edge Banding And Able To Withstand With Udl Of 45 Kgs.Doors Made Out 16 Mm Thick Particle Board (E-1 Grade), Melamine Finishes With 2 Mm Pvc Edge-Banding Fitted With Extruded Aluminium Handle, As Per Requirement. Storages Should Be Provided With Adjustable Levellers. Door Lock Should Be Of Three-Way Lock Mechanism, The Hinged Doors Can Be Locked At Once. Door Should Be Provided With Hinge-Damping Mechanism To Enable Soft Closing Of Doors . E1 Grade Laminate To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Should Be Phenol Base With Emission Of Not More Than (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). Item Is Inclusive Of Front Table, Side Table, Back Console, Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing. Agmcabin Table Of Size: Main Table- 2100 X 900 Mm; Side Table- 1200 X 600 Mm; Back Console 2100 X 550 Mm;740-760 H Mm , Agm Cabin Table : Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Table ,(As Per Finally Approved Sample By Department) Of Following Dimensions With The Following Specifications. (Manufacturers Warranty- 5 Years) Cabintable Top And Under Structure Should Be Made Of Minimum 25Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). The Height Of Table Top Shall Be 740-760 Mm From Ground Level. The Particleboard Should Bee-1 Gradewith Pvc Edge Banding.Understructure :Melamine Legs Made Ofminimum 25Mm Thick Particle Board. The Exposed Edge Of Worktop Shall Be Secured With 1.5 Mm-2 Mm Thick Pvc Edge Banding Tape Of Approved Colour. The Modesty Panel Should Be Provided With 19 Mm Thickmade Of Particle Board Wood Grade E-1 (Environmental Friendly) Thickness 25 Mm. ,Cover With Melamine. The Height Of Modesty Panel Should Be 600Mm. Each Table Should Have 3 Drawer Pedestal Made Of25mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). All Hardware Shall Be Of Approved Make. Wiremanagemnet : Wire Management Through Flat Top Matching With Table Top Finish. Providing And Fixing Low Height Storages , Body (Top, Side & Back) Of Storages Should Be Made Out Of 19 Mm Thick E1 Grade Particle Board With 2Mm Thick Pvc Edge Banding& Only Top Thickness Is 25Mm Thick, Shelf Of Storages Should Be Made Out Of 16 Mm E1 Grade Particle Board With 2Mm Thick Pvc Edge Banding And Able To Withstand With Udl Of 45 Kgs.Doors Made Out 16 Mm Thick Particle Board (E-1 Grade), Melamine Finishes With 2 Mm Pvc Edge-Banding Fitted With Extruded Aluminium Handle, As Per Requirement. Storages Should Be Provided With Adjustable Levellers. Door Lock Should Be Of Three-Way Lock Mechanism, The Hinged Doors Can Be Locked At Once. Door Should Be Provided With Hinge-Damping Mechanism To Enable Soft Closing Of Doors . E1 Grade Laminate To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Should Be Phenol Base With Emission Of Not More Than (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). Item Is Inclusive Of Front Table, Side Table, Back Console, Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing. Agmcabin Table Of Size: Main Table- 2100 X 900 Mm; Side Table- 1200 X 600 Mm; Back Console - 2550 X 550 Mm;740-760 H Mm , Gm Cabin Table : Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Table,(As Per Finally Approved Sample By Department) Of Following Dimensions With The Following Specifications. (Manufacturers Warranty- 5 Years) Cabintable Top And Under Structure Should Be Made Of Minimum 25Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). The Height Of Table Top Shall Be 740-760 Mm From Ground Level. The Particleboard Should Bee-1 Gradewith Pvc Edge Banding.Understructure :Melamine Legs Made Ofminimum 25Mm Thick Particle Board. The Exposed Edge Of Worktop Shall Be Secured With 1.5 Mm-2 Mm Thick Pvc Edge Banding Tape Of Approved Colour. The Modesty Panel Should Be Provided With 19 Mm Thickmade Of Particle Board Wood Grade E-1 (Environmental Friendly) Thickness 25 Mm. ,Cover With Melamine. The Height Of Modesty Panel Should Be 600Mm. Each Table Should Have 3 Drawer Pedestal Made Of25mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). All Hardware Shall Be Of Approved Make. Wiremanagemnet : Wire Management Through Flat Top Matching With Table Top Finish. Item Is Inclusive Of Front Table, Side Table, Back Console, Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing. Gmcabin Table Of Size: Main Table- 2550 X 900 Mm; Side Table- 1250 X 600 Mm; Back Console1900 X 550 Mm;740-760 H Mm , Gm Cabin Table : Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Table,(As Per Finally Approved Sample By Department) Of Following Dimensions With The Following Specifications. (Manufacturers Warranty- 5 Years) Cabintable Top And Under Structure Should Be Made Of Minimum 25Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). The Height Of Table Top Shall Be 740-760 Mm From Ground Level. The Particleboard Should Bee-1 Gradewith Pvc Edge Banding.Understructure :Melamine Legs Made Ofminimum 25Mm Thick Particle Board. The Exposed Edge Of Worktop Shall Be Secured With 1.5 Mm-2 Mm Thick Pvc Edge Banding Tape Of Approved Colour. The Modesty Panel Should Be Provided With 19 Mm Thickmade Of Particle Board Wood Grade E-1 (Environmental Friendly) Thickness 25 Mm. ,Cover With Melamine. The Height Of Modesty Panel Should Be 600Mm. Each Table Should Have 3 Drawer Pedestal Made Of25mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). All Hardware Shall Be Of Approved Make. Wiremanagemnet : Wire Management Through Flat Top Matching With Table Top Finish. Item Is Inclusive Of Front Table, Side Table, Back Console, Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing.Gmcabin Table Of Size: Main Table- 2550 X 900 Mm; Side Table- 1250 X 600 Mm; Back Console 2550 X 550 Mm;740-760 H Mm , Ed Cabin Table : Manufacturing, Providing And Placing In Position Machine Made Factory Assembled Table,(As Per Finally Approved Sample By Department) Of Following Dimensions With The Following Specifications. (Manufacturers Warranty- 5 Years) Cabin Table Top And Under Structure Should Be Made Of Minimum 38Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). The Height Of Table Top Shall Be 740-760 Mm From Ground Level. The Particleboard Should Bee-1 Gradewith Pvc Edge Banding.Understructure :Melamine Legs Made Ofminimum 38Mm Thick Particle Board. The Exposed Edge Of Worktop Shall Be Secured With 1.5 Mm-2 Mm Thick Pvc Edge Banding Tape Of Approved Colour. The Modesty Panel Should Be Provided With 19 Mm Thickmade Of Particle Board Wood Grade E-1 (Environmental Friendly) Thickness 25 Mm. ,Cover With Melamine. The Height Of Modesty Panel Should Be 600Mm. Each Table Should Have 3 Drawer Pedestal Made Of25mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mm Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). All Hardware Shall Be Of Approved Make. Wiremanagemnet : Wire Management Through Flattop Matching With Table Top Finish. Providing And Fixing Low Height Storages , Body (Top, Side & Back) Of Storages Should Be Made Out Of 19 Mm Thick E1 Grade Particle Board With 2Mm Thick Pvc Edge Banding& Only Top Thickness Is 25Mm Thick, Shelf Of Storages Should Be Made Out Of 16 Mm E1 Grade Particle Board With 2Mm Thick Pvc Edge Banding And Able To Withstand With Udl Of 45 Kgs.Doors Made Out 16 Mm Thick Particle Board (E-1 Grade), Melamine Finishes With 2 Mm Pvc Edge-Banding Fitted With Extruded Aluminium Handle, As Per Requirement. Storages Should Be Provided With Adjustable Levellers. Door Lock Should Be Of Three-Way Lock Mechanism, The Hinged Doors Can Be Locked At Once. Door Should Be Provided With Hinge-Damping Mechanism To Enable Soft Closing Of Doors . E1 Grade Laminate To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Should Be Phenol Base With Emission Of Not More Than (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). Item Is Inclusive Of Front Table, Side Table, Back Console, Keyboard Tray & Cpu Trolley; Sizes Will Be As Per Drawing. Ed Cabin Table Of Size: Main Table- 3300 X 900 Mm; Side Table- 1250 X 600 Mm; Back Console 3300 X 550 Mm;740-760 H Mm , Providing & Installingtwo Seater Sofa .-Agm Cabin: Overall Size Of The Sofa Shall Be 144Cm(W)*83Cm(D)*86.5Cm(H)*46Cm(Sh).Upholstery Material Shall Be 1 Mm Thick Fabric•Breaking Load (N) : Warp 1327 Weft 1228•Elongation At Break (%) : Warp 27.5Weft 34.6•Material Shall Be The Combination Of 12Mm (Moisture Resistance And Termite Free) Thick Plywood And Pine Wood •Pinewood Cross Section ( Without Knots)-22X64 Mm-34X64 Mm-16X35 Mm•Moisture Content Shall Be 10 -12 %. Seat Material Shall Be Slab Stock Foam With Density Base Of 28 Kg/M3 And Super Soft 32 Kg/M3 At Top.Back Material Shall Be Slab Stock Foam With Density Of Super Soft 32 Kg/M3 With A Layer Of Siliconized Conjugated Polyester Fiber Of 200 Gsm. Basic Rate Of Fabric: Rs.600 , Supplying & Placing In Position Modular 4 Seater Shape Sofa Consisting Of 1No One Seater Sofa And 1 No Three Seater Along With Armrests At Both The Terminals Seat & Body- Under Structure: Under Structure Is Made Of Combination Of Plywood & Pinewood Members. Plywood Is 12±1Mm Thk. [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Are Cross Section [22X25, 22X40, 25X75 & 25X100mm] Are Without Major Knots & Defects On The Surface. 3Mm Mdf Is Stapled On The Seat Front Bottom Vertical Surface To Get The Surface To Stick The Foam. Dia. 3.8Mm Zigzag Spring Asly. Is Mounted On The Seat Structure With Spring Mounting Plastic Bracket For Support & Additional Cushioning Purpose. Elastic Belt Of 2 Width Are Used Above The Spring Asly. To Give Good Sagging Effect. Non Woven Fabric Is Stapled On The Seat Structure Frame Above The Spring Asly. To Avoid The Tearing Of Seat Foam With The Surface Contact Of Metal Spring. Back Vertical Surface Is Stapled With Non-Woven Cloth To Get Surface To Stick The Foam. Complete Under Structure Is Made By Gluing & Stapling. • Foam: Seat Is Made Of Pu Foam With Density 28 Kg/M3 Having An Additional Top Layer Of Super Soft Pu Foam With Density 18 Kg/M3. Recron Sheet Of 230Gsm Is Used Above This Foam. Seat Front Bottom Vertical Surface & Back Vertical Surface Is Glued With The Pu Foam With Density 22 Kg/M3. Side Vertical Surface, Body Front Taper Vertical & Top Horizontal Surface Is Glued With Pu Foam With Density 16 Kg/M3. • Upholstery: Seat & Body Upholstery Is Made In The Dual Tone Colour With Fabric / Fabric Option & Fabric / Leatherite Option. Back Top Cushion- Under Structure: Under Structure Is Made Of Combination 12±1Mm & 6±1Mm Thk. Plywood [For 2 Seater, 3 Seater & Chaise Lounge] & Combination 12±1Mm, 4±1Mm Thk. Plywood & 3Mm Mdf [For Small Corner & Big Corner] With Gluing & Stapling. • Foam: It Is Made With Super Soft Pu Foam With Density 18 Kg/M3. • Upholstery: It Is Upholstered With Fabric. Basic Rate Of Fabric: Rs.600 , Providing & Installing Three Seater Sofa .- Ed Cabin: Supplying And Placing Leather Sofa. (L)1820*(H)890*(W)920 Thread : Nylon * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm Basic Rate Of Leather: Rs.2500 , Providing & Installing Single Seater Sofa Ed Cabin: Supplying And Placing Leather Sofa. Size:- 920Mm (W) X920mm (D) X 890Mm (H). Seat Height 470Mm. Thread : Nylon * Material Handling Data Sheet (Msds) For Glue Standard Of Plywood Used: Is 303 Commercial Plywood Thickness 12Mm Basic Rate Of Leather: Rs.2500

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	18-Mar-2024	Corrigendum 001	Technical Bid	22-03-2024

Refer document

Refer document

Refer document

Name of Work: Procurement of additional Furniture for BHEL Sadan at BHEL Complex, Plot no 25, Sec-16A, Noida

Sl. No.	Item Description
1	L- Shape workstation (L1500/1500 x D600 x H750mm) + Metal Pedestal Unit:-as per below specs. (Manufacturer"s warranty- 5 years) Partition based workstation with hollow partition of 69-75mm thickness. Partition is Tile based Aluminium Framesof69-75mmthickness of height 1200mm-1230mm made of 1.2 - 1.25 mm thick Aluminium Profiles epoxy powder coating including skirting of 100-150mm highwith leveller and have 45-50mm clear space between two tiles for wire management facilities. Aluminium parts shall have epoxy powder coating min 45microns. Cover Section (Raceways) coming above/below the worktop 85-100mm height made up of 0.7-1.0mm thick zinced /CRCA powder coated steel and the Worktop 1500x1500mm in one piece is made of 25 mm thick E 1-Grade / Green prelaminated particleboard of approved shade supported by 1.2mm-2mm. thick, epoxy powder coated steel brackets. All flat edges shall be finished with hot melt PVC edge banding of 2mm Thickness on User Side and 0.8mm thick on other sides. Fabric tiles along with One Glass Marker and One magnetic pinup Tile shall be provided for each user above the work surface and Metal Powder Coated Tiles below the worktops. All worktops are closed with 25 mm thick E 1-Grade / Green prelaminated particleboard gable end of approved shade supported by 1.2mm-2mm. thick, epoxy powder coated steel brackets on both sides. Trims: Extruded aluminium, epoxy powder coated colour of min 45microns thickness . Each Workstation has a 3 Drawer ( 2 Drawer + 1 Filing )Mobile pedestal (Metal) unitof size 450 Width. Height 640-680mm andDepth 500mm, lockable with keys. Front and Body:0.7 /0.8mm. Powder coated steel. Castors: 2 Front Lockable Castors & 2 Std Castors. Item is inclusive of keyboard tray & CPU trolley; sizes will be as per drawing.
2	DGM Workstation - as per below given sizes & Metal Pedestal unit. Main Table(750 mm high & 750mm wide): Top: 25 mm. thick particle board (E1-Grade) clad with 0.6mm thick post formed laminate with flat edge duly sealed with 2mm thick PVC Edge-banding: 2 mm. PVC edge-banding Modesty:18mm thick Particle Board (E-1 Grade / Green). Gable:25 mm. thick pre-laminate particle board (E1-Grade / Green). Edge-banding 2 mm PVC edge-banding . Height adjustable levellers in Gable end . Side Table (750mm high & 500mm wide) :25 mm. thick particle board (E1-Grade / Green ) clad with 0.6mm thick post formed laminate with 0.4mm backing laminate with flat edge duly sealed with 2mm thick PVC Edge-banding. Main Table and Side Table Joint is Male /Female Joint for Neat finishing without any gap at Joining of 2 Post formed Worktops. Back Console(750mm high & 400mm wide) :25 mm. thick particle board (E1-Grade / Green ) clad with 0.6mm thick post formed laminate with 0.4mm backing laminate with flat edge duly sealed with 2mm thick PVC Edge-banding. Side Table and back Console Joint is Male /Female Joint for Neat finishing without any gap at Joining of 2 Post formed Worktops. Back Console shall be inclusive of storage shelves and shutters ( Prelaminated) with necessary edge banding in 18mm thk. & supporting hardware.(handles & Hinges) Mobile Pedestal: 3 Drawer ( 2 Drawer + 1 Filing )Mobile pedestal (Metal) unitof size 450 Width. Height 640-680mm andDepth 500mm, lockable with keys. Front and Body:0.7 /0.8mm. Powder coated steel. Castors: 2 Front Lockable Castors & 2 Std Castors. Item is inclusive of front table, side table, back console, keyboard tray & CPU trolley; sizes will be as per drawing. Length - M.T.1650 mm, S.T. 1000 mm, B.C.1650mm (Manufacturer"s warranty- 5 years)
3	AGM Cabin Table : Manufacturing, providing and placing in position machine made factory assembled Table ,(as per finally approved sample by department) of following dimensions with the following specifications. (Manufacturer"s warranty- 5 years) CabinTable top and under structure should be made of minimum 25mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (
4	AGM Cabin Table : Manufacturing, providing and placing in position machine made factory assembled Table ,(as per finally approved sample by department) of following dimensions with the following specifications. (Manufacturer"s warranty- 5 years) CabinTable top and under structure should be made of minimum 25mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (
5	GM Cabin Table : Manufacturing, providing and placing in position machine made factory assembled Table,(as per finally approved sample by department) of following dimensions with the following specifications. (Manufacturer"s warranty- 5 years) CabinTable top and under structure should be made of minimum 25mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (
6	GM Cabin Table : Manufacturing, providing and placing in position machine made factory assembled Table,(as per finally approved sample by department) of following dimensions with the following specifications. (Manufacturer"s warranty- 5 years) CabinTable top and under structure should be made of minimum 25mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (
7	ED Cabin Table : Manufacturing, providing and placing in position machine made factory assembled Table,(as per finally approved sample by department) of following dimensions with the following specifications. (Manufacturer"s warranty- 5 years) Cabin Table top and under structure should be made of minimum 38mm. thick Particle Board (E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (
8	Providing & installingTwo Seater Sofa .-AGM Cabin: Overall size of the sofa shall be 144cm(w)*83cm(d)*86.5cm(h)*46cm(sh).Upholstery Material shall be 1 mm thick Fabric•Breaking Load (N) : Warp 1327 Weft 1228•Elongation at break (%) : Warp 27.5Weft 34.6•Material shall be the Combination of 12mm (moisture resistance and termite free) thick plywood and pine Wood •Pinewood cross section ( without knots)-22x64 mm-34x64 mm-16x35 mm•Moisture content shall be 10 -12 %. Seat Material shall be Slab stock foam with density Base of 28 kg/m3 and super soft 32 kg/m3 at top.Back Material shall be Slab stock foam with density of Super soft 32 kg/m3 with a layer of siliconized conjugated polyester fiber of 200 gsm. Basic Rate of Fabric: Rs.600
9	Supplying & Placing in position modular 4 seater Shape sofa consisting of 1no One seater sofa and 1 no three seater along with armrests at both the terminals Seat & Body- Under structure: Under structure is made of combination of plywood & pinewood members. Plywood is 12±1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are cross section [22x25, 22x40, 25x75 & 25x100mm] are without major knots & defects on the surface. 3mm MDF is stapled on the seat front bottom vertical surface to get the surface to stick the foam. Dia. 3.8mm zigzag spring asly. is mounted on the seat structure with spring mounting plastic bracket for support & additional cushioning purpose. Elastic belt of 2" width are used above the spring asly. to give good sagging effect. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid the tearing of seat foam with the surface contact of metal spring. Back vertical surface is stapled with non-woven cloth to get surface to stick the foam. Complete under structure is made by gluing & stapling. • Foam: Seat is made of PU foam with density 28 kg/m3 having an additional top layer of super soft PU foam with density 18 kg/m3. Recron sheet of 230GSM is used above this foam. Seat front bottom vertical surface & back vertical surface is glued with the PU foam with density 22 kg/m3. Side vertical surface, body front taper vertical & top horizontal surface is glued with PU foam with density 16 kg/m3. • Upholstery: Seat & body upholstery is made in the dual tone colour with fabric / fabric option & fabric / leatherite option. Back Top Cushion- Under structure: Under structure is made of combination 12±1mm & 6±1mm thk. plywood [for 2 Seater, 3 Seater & Chaise Lounge] & combination 12±1mm, 4±1mm thk. plywood & 3mm MDF [for Small Corner & Big Corner] with gluing & stapling. • Foam: It is made with super soft PU foam with density 18 kg/m3. • Upholstery: It is upholstered with fabric. Basic Rate of Fabric: Rs.600
10	Providing & installing Three Seater Sofa .- ED Cabin: Supplying and Placing Leather sofa. (L)1820*(H)890*(W)920 THREAD : Nylon * Material Handling Data Sheet (MSDS) for Glue Standard of Plywood used: IS 303 Commercial Plywood Thickness 12mm Basic Rate of Leather: Rs.2500
11	Providing & installing Single Seater Sofa ED Cabin: Supplying and Placing Leather sofa. SIZE:- 920mm (W) x920mm (D) x 890mm (H). Seat height 470mm. THREAD : Nylon * Material Handling Data Sheet (MSDS) for Glue Standard of Plywood used: IS 303 Commercial Plywood Thickness 12mm Basic Rate of Leather: Rs.2500