Construction Of Gym Equipment At Municipal Reserve Site At Eatukuru In Div No 16-32.76 Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material As Per Technical Specification 305 Mord / 304 Morth 10.92 Filling Of Stone Crusher Dust For Foundation Trenches Including Cost And Conveyance Off All Materials And All Labour Charges Ramming, Watering Etc, As Per Drawing And Technical Specification In Clause 305.3.9 Mord & 304 Morth 15.92 Providing Concrete For Plain / Reinforced Concrete ( M10 ) In Open Foundations Using 20 Mm Graded Hard Stone Aggregate , Mechanically Mixed, Placed In Foundation And Compacted By Vibration Including Curing For 14 Days Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Mord And 1500, 1700 & 2100 Morth. 8.28 Brick Masonary In C.M ( 1:6 ) Using 2Nd Class Well Burnt Ground Moulded Traditional Size Bricks Of Locally Available Having A Crushing Strength Of Less Than 35 Kg / Sq.Cm &Size Of 23X11x7cm Including Cost &Coneyance Of Material To Site, Mixing Of Cement Of Mortar & Laying Of Bricks & Mortar To Specified Thickness , Watering, Curing, Including All Scaffolding, Hire &Operational Charges Of Machinary, All Labour Charges & All Labour Charges Etc. Complete For Finished Item Of Work ( Bld-Cstn-3-1 ) 92.00 Plastering In C.M ( 1:4 ) 12 Mm Thick Including Cost And Conveyance Of All Material, Labour For Mixing Material, Laying And Curing Etc., Complete - 10 Sq.M. ( Bld-Cstn-6.2 ) 1.00 Supply, Delivery, Installation And Commissioning Of Sky Walker With Main Frame Shall Be Minimum Of 80Mm Nb Dia Of Thickness Not Less Than 4.50Mm & Handle Pipes Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanized With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded With Plastic / Rubber Grips On Top End. The Handle Pipes Are Hinged Over 80Nb Main Frame With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. The Handle Pipes Shall Be Further Extended To The 32Mm Nb Dia On Both Sides. Paired Rectangular Tubes With Four Foot Rests Are Linked To Main Frame. Foot Rest Shall Be Made Of Aluminum Material - Lm26 Grade. Total Structure Is Supported On Base Frame Shall Be Made Up Of Rectangular Pipe Of 50X50x3mm And Side Frames Shall Be Made Up Of 32Mm Nb Dia Gi Pipes. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 150Mmx230mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Apg&Bc And Govt. Of A.P Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. . Skywalker Size Double Health Walker / Aerial Stroller Double / Air Walker / Fun Walker Double ( 2000X350x1500mm ) ( ± 10% Tolerance Allowable ) ( L X W X H ) : 1700X830x1650 Mm ( ± 10% Tolerance Allowable ) 1.00 Supply, Delivery, Installation And Commissioning Of Tai Chi Spinner 4 Wheel With Center Pipe Shall Be Of Minimum 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Support Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Tai Chi Spinner Rings Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanized With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded With Handle Knobs Are Made From High Quality Nylon Material. The Rings Are Hinged Over 32Nb Support Frame With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 150Mmx230mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Apg&Bc And Govt. Of A.P Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630.. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Thai Chi Spinner 4Wheel Size ( L X W X H ) : 1230X520x1500 Mm ( ± 10% Tolerance Allowable ) 1.00 Supply, Delivery, Installation And Commissioning Of Chest Press Double With Prime Stand Pipe Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Handle Frame & Seat Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Connecting Links Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanized With Minimum Of 75 Microns Ionized Coated And Zinc Dipped Joint With Robotic Welded. The Two Handle Frames Are Hinged Over 100Nb Prime Stand Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Seat & Back Rests Are Made With The Gi Sheet Of Size 330X330x2mm With Uniform Bending Radius To Avoid Sharp Edges. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 150Mmx230mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Apg&Bc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. Seated Chest Press / Chest Press Double ( 1550X710x2150 Mm ) ( ± 10% Tolerance Allowable ) 1.00 Supply, Delivery, Installation And Commissioning Of Horse Rider With Main Frame Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Handle Frame & Seat Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Connecting Link Pipes Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanized With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Handle Frame Are Hinged Over 100Nb Main Frame With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Seat & Back Rests Are Made With The Gi Sheet Of Size 330X330x2mm With Uniform Bending Radius To Avoid Sharp Edges. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 150Mmx230mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Apg&Bc And Govt. Of A.P Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. Horse Rider Size ( L X W X H ) : 1000X695x1000 Mm ( ± 10% Tolerance Allowable ) 1.00 Supply, Delivery, Installation And Commissioning Of Standing Tripple Twister With Prime Pipe Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Standing Twister Plate Support Pipe Shall Be Minimum Of 80Mm Nb Dia Of Thickness Not Less Than 4.5Mm, Bottom Frame Support Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Handle Ring Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanized With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Twister Plate Is Hinged Over 80Nb Standing Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 150Mmx230mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Apg&Bc And Govt. Of A.P Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. Hd Waist Twister / Tripple Twister ( 1570X1570x1350 Mm ) ( ± 10% Tolerance Allowable ) 100.00 Laying Of 3 / 8” Turfted Synthetic Royal Grass Type ( Artificial ) Of 35Mm Pile Height Of Fiber Colour 4 Field Green + Olive Green, Root Zone 4 Jute + 4 Field Green With Covering Of 14 Stitches Per 10Cm With Double Backing Uv Stable, 215 Gram / Sq.Mt, Coating With Black Sbr Latex, Duly Fibers Meet The Most Stingent Environmental Standards Including Cost Of Material, Transportation To The Site, Labour Charges, Etc In Complete Item Of Work
