Military Engineer Services-MES has published Tender For Additional/Alternator And Improvements To Bldg No P-467 At Smq, Spl Repair To Electrical Motorised Shutters At Certain Otm Accommodation And Provn Of 15 Amps Power Socket And Associated Wiring For Ups Supply To Heavy Duty Printers In Ips (Bldg . Submission Date for this Tender is 23-03-2024. Electrification Work Tenders in lonavla Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc. |
| 2 | M&L for rendering 10 mm thick cement plaster in CM 1:6on brick work/concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified. |
| 3 | M&L for rendering 20mm thick cement plaster in CM 1:4(12mm as 1st coat and 8mm in finishing coat using water proofing compound on brick/ stone surfaces finished fair and even without using extra cement etc complete all as specified and directed.Note : Water proofing compound and will be measured and paid separately. |
| 4 | M&L for rendering 5 mm thick cement plaster in CM 1:3on ceiling or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified. |
| 5 | M&L for preparation of new plastered surface of ceiling andapplyingthree coat of white wash complete all as specified and as directed. |
| 6 | M&L for preparation of new plastered surface of wall andapplyingTwo coat of oil bound distemper over the alkali resistance priming paint primer over 3mm thick wall care puttycomplete all as specified and as directed. |
| 7 | Preparing new plastered external surface of wall and applying 2 Coats of Acrylic elastomeric exterior waterproof coating (Dr. Fixit Raincoat or of equivalent make mentioned in list of manufacturers herein after) with extra coat on rain lashed walls, dead walls, projections & Parapet wall top on primed surface with Efflorescence resistant penetrating primer (Dr. Fixit Primeseal or of equivalent make mentioned in list of manufacturers herein after)diluted with 50% water, over 3mm wall care putty, Work shall be executed by engaging the approved applicator of the manufacturer and as approved by GE. |
| 8 | M&L for complete removal of existing treatment of old painted wall surfaces and praparing and applying two coat of oil bound distemper over alkali resistance primimg paint primer over 3.00 mm thick white cement based wall care putty smooth finish etc of approved make & shade on walls and other places complete all as specified and as directed. |
| 9 | M&L for complete removal of existing treatment of old painted ceiling surfaces and applying three coat of white wash complete all as specified and as directed. |
| 10 | Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 11 | Dismantling stone slabs and tiles of any descritpion or thickness in floors/skirting laid bedded in any mortar complete all as specified and directed. |
| 12 | M&L machine cut granite16-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade |
| 13 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (desined pattren) (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 14 | M&L Glazed ceramic coloured tiles in vertical surfaces (desined pattern)350 x 250x 7 to 8 mm/ 450 x 350 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 15 | Screed bed or bedding layer of mortar 15mm thick in CM (1:4)for laying floor tiles |
| 16 | M&L for rendering 10mm thick in CM 1:3 as in backing coat of as in skirting and glazed tiles/ facial tilesin walls complete all as specified and directed. |
| 17 | Taking down steel/aluminium windows/ventilator of any type any size complete with all fittings |
| 18 | S&F machine cut and machine polished,green marble, 16-18mm thick in single piece as in cooking platform bedded, window cill,Jambs, Trade, Riser, landingetc jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including backing coat of rendering 10 mm thick in CM 1:4 all as specified and directed. |
| 19 | S&F Powder coated aluminium three track, three shutter (equal width) type window miniumum 15 micron anodised with frame made of aluminium sections of size 91.80 x 31.75 x 1.0mm and shutters made out of aluminium sections 39.4 x17.7 x 1.0mm without sash bars including necessary jointing cleats, glazing clips, rubber packing, anodised snap beadings, screws aluminium fittings lockings arragngements etc including 4.00mm thick sheet glass for glazed shutters and stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire gauge shutter all as specified and as directed, before. |
| 20 | S&F powder coated aluminium ventilator partly fixed and partly louvered type without sash bar section as per minimum 15 micron anodised including necessary jointing, clip, rubber packing, anodised snap beading crews and 4mm thick pin headed glass etc complete. |
| 21 | Dismantiling and removing sunken slab filling of brick bats/cinder/light weight concrete including plastering on sunken floor/sides of floor slab/tiles of toilets in all the floors including all the water and sanitary fixtures and removing all rubbish/debris outside MoD land as per instruction complete all as specifiedand directed. |
| 22 | The suken floor RCC slab including sides to the full extent of sunken portion in upper floor shall be prepared and plastered with 15 mm thick cement plaster in CM 1:3 with water proofing compound as per manufacturer"sinstructions and finished even and smooth without using extra cement. When the plaster is cured and dried up, apply a uniform coat of blown grade bitumen 85/25 @ 1.2 kg/Sqm confirming to IS 702 over a coat of primer @ 0.70 Kg.Sqm over plastered surface complete all as specified and as directed. Note :- Integral water proofing compound shall be measured and paid separately as "Supply only". |
| 23 | Water proofing treatment to Sunken floor slabe complete as specified bellow and as directed. (a) Provide and lay 3mm thick APP modified torch applied prefabricated five layer water proofing membrane weight not less than 3.60 Kg/Sqm. (b) Apply a uniform coat of blown grade bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS 702 of the surface area. |
| 24 | PCC lean concrete 1:5:10 type E2 laid in layers of not more than 100 mm thick tamping etc complete all as specified and directed by Engineer-in-Charge. |
| 25 | 50mm thick PCC 1:2:4 type B0 as padding concrete over lean concrete. |
| 26 | Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m butn.exc. 2000m etc complete all as specified and directed. |
| 27 | M/L for rendering 15mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment |
| 28 | M/L for PCC 1: 2 : 4 type B-1 (using 20mm graded agg) for PCC padding on RCC roof surface finished even and smoother using extra cement all as specified and directed by Engr-in-Charge. |
| 29 | M/L for applying oil based bituminous primer @ 0.10 Kg/Sqm providing and laying 4mm thick.APP modified water proofing membrane weighing not less than 4kg/sqm re-inforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/Sqm, tearing strength of 180N and with thermal insulation with the mineral / graved finish on upper side and laying with torches application and with 10 cm minimum lap in both direction length wise and width wise all as specified and directed by Engr-in-charge. |
| 30 | M&L for making the grooves 25mm wide and 50mm deepto "V" section in existingwalls/columns, roofs cleaning out and tacked the polymeric membrane in to the grooves, inserting chajjaof PPGI sheet and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed. |
| 31 | Demolition of brick work/stone masonry built in cement mortar including all quoins arches, pillars all as directed. |
| 32 | M&L for brickwork with subclass "B" bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 including demolition. |
| 33 | Dismantling of water tanks exc 250& n exc 500 ltr capacity and removing to store complete all as specified and directed. |
| 34 | Dismantling of water tanks exc 500 & n exc 1000 ltr capacity and removing to store complete all as specified and directed. |
| 35 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in positionincluding 25mm dia float ball brass valve and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified |
| 36 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 ltrs capacity hoisted and fixed in position including 25mm dia float ball brass valve and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified |
| 37 | Taking down 15mm dia bore GI steel tubing and connection including cleaning and making good dismantaled surface complete all as specified. |
| 38 | Taking down 20mm dia bore GI steel tubing and connection including cleaningand making good dismantaled surface complete all as specified. |
| 39 | Taking down 25mm dia bore GI steel tubing and connection including cleaningand making good dismantaled surface complete all as specified. |
| 40 | Dismantling /taking down PVC/Cast iron soil/waste pipes 100mm/75mm bore including all fitting like bends etc. |
| 41 | S&F CPVC pipes, SDR 11, 25mm outer dia conforming to IS-15778 with all fittings such as Tee, bends, elbows, unions sockets and end oieces etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors complete all as specified. |
| 42 | S&F CPVC pipes, SDR 11, 20mm outer dia conforming to IS-15778 with all fittings such as Tee, bends, elbows, unions sockets and end oieces etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors complete all as specified. |
| 43 | 25 mm dia gate /sluce valave fixed to pipe complete all as specified and directed. |
| 44 | 20 mm dia gate /sluce valave fixed to pipe complete all as specified and directed. |
| 45 | S&F Vitreous china wash down water closet (Padestal pattern) pan white including bolts and flush pipe, pedestal pan and trap including connections to drain (or outgoing pipe) and flushing pipe etc including seat coverclosed type complete fixed in repairs. |
| 46 | S&F Vitreous china white flat back of size 450x300mm wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixed in repairs. |
| 47 | S&F 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 48 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. |
| 49 | S&F Flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level cistern. |
| 50 | S&F PVC connection low density polythene pipe 15mm dia, 450mm long, heavy duty with PTMT nuts. |
| 51 | S&F waste fittings 32mm dia, brass, chromium plated for glazedware sinks, basins, etc, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed., |
| 52 | S&F in repairs Bib taps, fancy type, chromium platedwith crutchsc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed. |
| 53 | S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot" or ‘Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed. |
| 54 | S&F in repairs Angle cock/stop cock, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 55 | S&F in repairs toilet paper holder of stainless steel of size 10.5cm X 9cm fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 56 | S&F in repair soap dish Cat No BA -25of Prayag polymers Pvt Ltd or equivalent complete all as specified and directed. |
| 57 | S&F in repairs hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook all as specified and as directed. |
| 58 | S&F in repairs acrylic cabinet mirror of size 450mm X600mm fixed with wooden plugs with cromium plated screw and cup washers, complete all as specified and directed, Make shall be of M/s Commander , M/s Jasmine or equivalent. |
| 59 | S&F 20mm dia towel rail chromium plated 60cm long including bracket fixed with stainless screws complete all as specified. |
| 60 | S&F in repairs brass chromium plated shower rose with or without swivel joints 75mm size, including fixing to steel pipe or union complete all as specified and as directed. |
| 61 | S&F PVC (SWR) pipes of dia 110mm bore double socketed in any length with rubber ring joints fixed to walls. |
| 62 | S&F PVC (SWR) pipe of 75mm bore in double socketed in any length with rubber ring joints fixed to walls. |
| 63 | S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap complete all as specified and as directed. |
| 64 | S&F PVC (SWR) bends of 75mm bore in radius. |
| 65 | S&F PVC (SWR) bends of 110mm bore in radius. |
| 66 | S&F PVC (SWR) branch piece double Y equal or unequalof 75mm bore in radius. |
| 67 | S&F PVC (SWR) branch piece double Y equal or unequalof110mm bore in radius. |
| 68 | S&F Harrison curtain rails, anodised aluminium with fixing brackets, stops, rollers etc fixed in repair incl brakets complete all as specified and directed. |
| 69 | S&Fstainles steel sink with drainage board ,1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipeetc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked. |
| 70 | S&F in repairs stainless steel kitchen plate rack of size 90cm X120cm X 1mm thick (18 gauge)conforming to the sample kept in the office of the AGE B/R , complete all as specified and directed. |
| 71 | Removal of demolished material/ debries from site exc 5km & n.exc 10km as per direction of Engr -in charge complete all as specified and directed. |
| 72 | M&L for chajja repairs with 1:2:4 concrete for dubbing and 15 mm thick plaster with water proofing compound including dismantling loose plaster/ rcc and scaffolding and necessary formwork etc compete all as specified and directed. |
| 73 | M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply two coat of synthetic enamel paint complete all as specified and as directed. |
| 74 | S&F Roof trusses (framed), sunshade frames, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W(Gde-E-250) including taking down all as specified and directed |
| 75 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 76 | S&F for Pre- Painted galvalume aluminiumzinc coating GI basedcorrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws,including taking down complete all as specified and directed. |
| 77 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165. |
| 78 | Taking down existing doors/windows/ventilators (without taking off shutters and guard bars) of n exe 1.5 sqmcomplete all as specified and as directed incl stacking the materials properly. |
| 79 | S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed. |
| 80 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 81 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified. |
| 82 | S&F Aluminium bow handles, cast type, anodised 125mm long. |
| 83 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 84 | Taking down existing doors/windows/ventilators (without taking off shutters and guard bars) of exe 1.5 sqm & n. exc 4 sqm etc complete all as specified and as directed incl stacking the materials properly. |
| 85 | S&F factory made Solid PVC Double door frame of size 50mm x 95mm made out of PVC supplying & Fixing in opening as directed by EIC |
| 86 | S&F Factory madeMoulded doorshutterconsisting of solid core single leaf flush door of 30 mm thickness,lipped with 15 mm (5mm x 3) thickx30 mm width on the other stiles & bottom rails & 10mm (5mm x 2) thick x 30 mm width on other stiles & bottom rails , The inner panel laminated with 2 mm thick termiteproof, water proofand fire resistant molded PVC sheet with 2,4,6 raisedpanel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mmplain and / or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC Lipping and manufacturer"s specification & drawing etc,complete all as specified and directed. |
| 87 | Ditto all as SI Item No 17 above but wire gauzed i.e pannel will be of wire gauze in lieu of single side prelam PVC sheet pannel. The wire gauze shall be wrapped on an addtional square 8 mm MS solid tube and and this tube shall be welded to MS tubes. The wire shall be streched to tighten firmily all as specified and directed |
| 88 | Taking down carefully unserviceable aluminium/copperpoint wiring (light, fan, socket or power)including unserviceablelight fittings, switch board complete,switch sockets, ceiling roses, pendants, regulators, sockets, etcandremoving materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 89 | M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and includingproviding PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. One light point or one fan pointor bell point controlled by one switch |
| 90 | One 3 pin socket outlet, 5 Amp independent |
| 91 | One 3 pin socket outlet, 5 Amp on the same board with other switches |
| 92 | One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size. |
| 93 | All as per item No.2 here in before but wiring with cables of size 2.5 sqmm for wiring & cables of size 2.5 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed. (Note : cutting chases & making good of disturbed surfaces shall be measured and paid separately). |
| 94 | S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed. |
| 95 | S & F socket out let, 2 in 1, 3 pin,5 Amps, 240 volts complete all as specified and directed. |
| 96 | S & F Switch socket combination, 2 in 1,5 Amps,flush type, 240 volts complete all as specified and directed. |
| 97 | S & F Switch socket combination, 5 in 1, 5/15 Amps, 240 volts, flush type with fuse & neon incator complete all as specified and directed. |
| 98 | S & F Ceiling rose, 3 way PVC insulated bodycomplete all as specified and directed by engineer in charge. |
| 99 | Supply and fixing ROD 1x18W (single side supply)for LED TUBE LIGHT T8 tube with polycarbonate body all as specified and directed.Make : Bajaj (BLRB - 20W LED) or equivlent PhilipsHavells. |
| 100 | Supply and fixing Batten 1x18W(single side supply)for LED TUBE LIGHT pre -coated CRCAA sheett, end caps made up with engineering plasticall as specified and directed.Make : Bajaj (BLRB - DB 118) or equivlent PhilipsHavells. |
| 101 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Crompton or equivlent Bajaj/Philips/Havells |
| 102 | S/F switch bell push, flush type 5 Amp. |
| 103 | S&F in repairs bell, electronic type AC, 230 Volts single pole. |
| 104 | M&L lamp holder, PVC/ poly carbonate type with black plate suitable for batten fittings. |
| 105 | Supply and fix new adore LED lamp 9 Watt confirming to Cat No LHLDBWH4L8R009 of Havell"s or euivalent in Philips / Bajaj |
| 106 | Supply and fix Inverter Bulb LED lamp 9 Watt confirming to Cat No LHLDEGEDML8009 of Havell"s or euivalent in Philips / Bajaj |
| 107 | Labour only for taking down and fixingrepairs to Ceiling Fan with Fan regulator/Exhaust Fan,anyMake & any Sweep Oiling, Greasing , removing all dust with paintingand Rewinding of fan by super ennameled copper insulated wire as per existing gauge, varnishing, heating assembling and testing for serviceable condition complete all as directed by Engineer-in-Charge. |
| 108 | S&F in repairs fan regulator electronic step type complete all as directed by EIC at site |
| 109 | Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Crompton or equivlent Bajaj/Philips/Havells |
| 110 | Taking down electric meter of any type and any make single/three phase by dismantling of all electrical connection checked the meter ,and Refixed same Nos of meter on wooden board in metal box of suitable size in same Nos of qtr after repairworks completed |
| 111 | S&F in replacemen MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surfaceall as specified and directed |
| 112 | S&F in repairs MCB SPN 40 to 63 AMP,240 Volts 10KA "C" curve , Complete all as specified and directed. |
| 113 | S&F in repairs MCB SP 5 To 32 AMP,single pole 240 Volts 10KA "C" curve, Complete all as specified and directed. |
| 114 | Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface. |
| 115 | M&L for sub main wiring drawing through PVC casing and capping with four runs of single core 6 sq mm and two runs of 6.0 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts gradeall as directed.Note:- Two run of 6 sqmm wire and One run of 6 sqmm wire and One run of PVC casing caping will be measured as one running meter. |
| 116 | M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition. |
| 117 | M & L for cutting/making hole for fixing of ser item No 15 and making good disturbed surface with existing surface all as specified and directed by Engr-in-charge. |
| 118 | M & Lfor replacement of manual cum electrical operation mode by installation of switch gear box for shutter as provided in shutter at site, rolling shutter operator indirect drive Side motorsingle phase - 1500kw in case of power failure manual drive three way push button with PVC pipe including testing on completion. All as specified and as directed by Engineer -In-Charge . Mtotor Make :- Swiftroll or equivalent JIELONG,ALIBABA |
| 119 | Supply and installation of motorized rolling shutter curtain slate 75mm x1.2mm thick corrugated design 4.00 MX 6.00 M (W X H)said guiderail 100mm x75 mm x 3mm thick edge 25mm Bering size 50mm bottom section 125x25mm with EPDM Rubber. Top bracket 5mm thickness with 40mm x 40mm x 5mm thick angle B-class top Drum with flench top hood cover 0.8mm thickness rolling shutter operator indirect drive slide motor Swiftroll single phase 1500kw in case of power failure manual drive three way push button with PVC pipe,including testing on completion, Color code as per requirementcomplete All as specified and as directed by Engineer -In-Charge . Mtotor Make :- Swiftroll or equivalent JIELONG,ALIBABA |
| 120 | M&L for sub main wiring drawing through PVC casing and capping with two single core 2.5 sq mm and one run of 2.5 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts gradeall as directed. Note:- Three run of 2.5 sqmm wire and One run of PVC casing caping will be measured as one running meter. |
| 121 | S&F in repairs switch socket combination 2 in 1, 3 pin 5/15 amp flush type universal. |
| 122 | S&F MCB DB TPN 4 ways double door with 440 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surfaceall as specified and directed |
| 123 | Supply and fixing MCB TPN/FP40 to 100 AMP 415V 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. |
| 124 | S&F in repairs MCB SPN 6-32 AMP,240 Volts 10KA "C" curve , Complete all as specified and directed. |
| 125 | M&L for sub main wiring drawing through PVC casing and capping with Wiring alongwith earth wiresize2x4.0 sq. mm + 4 sq. mm earth wireof FRLS is PVC insulated copper conductor, single core cable in surface/recessed as required .Note:- Two run of 4.0 sqmm wire and One run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter. |
| 126 | Supply lay and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 25 sq mm 4 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as diercted.Note : Cable are laying in undergruond or on wall by saddle as persite requirment. |
| 127 | M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
