Tender For Provision Of Radar Mission Data Review And Online Presentation Station In Admin Block At Lrde Bengaluru
Tender Value
44.90 Lakhs
Estimated cost
Bid Submission
29 Mar 2024
0 days left
EMD
89800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bangalore → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Radar Mission Data Review And Online Presentation Station In Admin Block At Lrde Bengaluru
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Mar-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE OF WORKS |
| 2 | Demolition of brick work built in cement mortar and removing the brick bats outside MD land by taking the same on credit complete all as specified |
| 3 | Dismantling of ceiling board of any type along with supporting aluminium/GI grid of any size and removing the same outside the MD land by taking the same on credit complete all as specified |
| 4 | Demolition of floor tiles, hearth or wall tiling including cement mortar bedding /backing coat and disposing of debris outside MD land complete all as specified and as directed. |
| 5 | Providing and laying Glazed vitrified floor tiles polished finish of size 1200 x 1200 mm, 12 mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in approved colours and shade, laid on and including 20 mm thick cement mortar bedding in CM 1:4, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and as directed. |
| 6 | Providing and laying Glazed vitrified floor tiles polished finish of size 600 x 600 mm, 12 mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in approved colours and shade, laid on and including 20 mm thick cement mortar bedding in CM 1:4, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and as directed. |
| 7 | Providing and laying Vitrified tiles in required sizes matching with floor tiles , with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in approved colours & shade, in skirting, dado, riser of steps, over and including 12 mm thick back coat of cement mortar 1:3 jointing with grey cement paste not less than 5 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and as directed. |
| 8 | Providing and fixing 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tilesat all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from specially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mmplaced at 600mm center to center in aceiling channel section of size 50 x 32m fixed to thesoffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screwed fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and applying two coats of primer suitable for panelling as per manufacturer\"s specification and as per direction of Engineer-in-Charge all complete. |
| 9 | Providing one or more coats offrench polishing as required to previously treated existing wooden panels/doors . |
| 10 | Complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion interior grade paint having VOC less than 50 gm/litreof required shade (Company Depot Tinted) and including priming coat using suitable water thinnable cement primer applied as per manufaturer\"s instructions over and including 1 mm thick wall care putty complete all as specified and directed. |
| 11 | Material and labour, rectified Glazed Ceramic floor tiles of size 300x300 mm or more 7-8mm thick, of 1st quality conforming to IS : 15622, of approved make and shade, as in flooring, set in neat cement slurry @ 3.3 kgs/sqm and joints pointed in white or coloured cement to matchcolour of tiles over and including 20 mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles , of sizes matching floor tiles conforming to I.S. 15622, of approved make, in approved colours & shade, in skirting, dado, riser of steps, over and including 12 mm thick back coat of cement mortar 1:3 jointing with grey cement paste not less than 5 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and as directed. |
| 13 | S&F Venetian blinds, rolling to the top type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and as directed.Make: Vista or equivalent approved make. |
| 14 | Supply and fixing three track UPVC sliding windows fitted with rollers at the base for smooth sideward track movement with two components provided with 6 mm thick plain ordinary glass and one component of stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm with all necessary fittings including taking down existing windows any type complete all as specified and as directed.Make : Fenesta or equivalent approved make. |
| 15 | Supply and fix 12 mm thick toughened glass in partition along with necessary fittings and screws including taking down existing partition of any type complete all as specified and as directed. |
| 16 | Material and labour for, Vitreous china snow white, Counter type wash hand basin of size 485mm x 370mm x 205 mm of Jaquar cat no. AIS-WHT-101903 or equivalent of other approved makes including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces after taking down existing WHB complete all as specified and as directed. |
| 17 | Taking down unserviceable EWC, supply and fixing new Vitreous china snow white colour floor mount type European Water Closet of size 520 x 360 x 390 mm with PVC seat cover and \"P\" trap, fixing at a distance of 300 mm from wall with bolt including connection with flushing cistern, seat cover and with outlet pipe complete of Jaquar cat no. AIS-WHT-101853P180SPPSM orequivalent in other makes complete all as specified and directed. |
| 18 | Material and labour for, Swan neck Pillar taps , suitable for fixing to 15 mm bore, cast copper alloy chromium plated,fancy type, of Jaquar cat no. STE-107021 or equivalent in other makes specified, screwed for iron pipe including taking down existing taps complete all as specified and as directed. |
| 19 | Supply and fix in repairs, Stop valves 15mm bore, fancy type with CP wall flanges, chromium plated, cast copper alloy with crutch or butterfly handleof Jaquar cat no. STE-107069 or equivalent in other makes specified, complete all as specified and as directed. |
| 20 | Supply and fix Bib taps 15 mm dia, fancy type, chromium plated with CP flange of Jaquar cat no. STE-107037 or equivalent in other makes specified, complete after taking down old bib taps all as specified and as directed. |
| 21 | Material and labour point wiring with 1.5 sqmm FRLS grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor for the following concealed type wiring and including new PVC conduit of any size, complete with all PVC conduit and accessories/ fittings, brass screws, washers etc, along with modular suitable factory made Sunken boxes concealed including all cutting/chases as applicable etc or surface type PVC boxes factory made (where concealing boxes is not possible as per site conditions)to accomodate modular plates, covers modular switches & sockets etc in wallsand including PVC insulated copper earth continuity conductor 1.5 Sqmm FRLS cable green colour connected to common earth dolly complete making goodthe disturbed surface of wall, floors, ceiling etc complete all as specified and directed by Engineer-in-chargefor One light / fan / bell point controlled by one, one way switch 5/6 Amps complete all as specified and as directed. |
| 22 | M&L forcircuit wiringwith 2 x 1.5 sqmm FRLS PVC insulated multistrandard copper conductorsingle core cable from MCB to switch board and 5 Amps socket wiring along with 1 x 1.5 sqmm earth wire FRLS PVC insulated multistrandard copper conducor green colour single core cable in and incluiding recessed medium class PVC conduit as required and directed by Engr-in-Charge. Note :- 2 runs of 1.5 sqmm cable, 1 run of earth wire and PVC conduit will be measured as one unit. |
| 23 | M&L forcircuit wiringwith 2 x 4 sqmm FRLS PVC insulated multistrandard copper conductorsingle core cable from MCB to switch board and 5 Amps socket wiring along with 1 x 4 sqmm earth wire FRLS PVC insulated multistrandard copper conducor green colour single core cable in and incluiding recessed medium class PVC conduit as required and directed by Engr-in-Charge. Note :- 2 runs of 4 sqmm cable, 1 run of earth wire and PVC conduit will be measured as one unit. |
| 24 | Supplying and fixing GI boxof size 180mm x 100mm x 60mm deep (nominal size) in recess including providing and fixingsuitable size modular plate, cover, Modular socket outlet 5 pin 5/6 Aand modular switch 5/6 A , connections etc. as required and directed by Engr-in-Charge. |
| 25 | Supplying and fixing GI box of size 180mm x 100mm x 60mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6-pin 15/16 A Modular socket outlet and 15/16 A modular switch, connections etc. as required and directed by Engr-in-Charge.Note for Sl Item No. 20 to 24 - Cutting, grooving as required and making good after works to match with the adjoining surfaces is the responsibility of the bidder, the cost inclusive in the quoted rate. |
| 26 | Supply and fix 3 pin, 5 Amps Ceiling rose surface type, Bakelite, 65 x 50 mm ISI marked with three terminals including PVC block all as specified and as directed. |
| 27 | Supply and Fixing motion sensor equipped LED luminaire Recessed ceiling mounted fitting 36 W, 2X2 feet CRCA white powder coated, high translucent frosted with internal wiring by copper wire, 3 way 10 Amps terminal, 240 volts complete all as directed by Engr-in-Charge. Make: Crompton , Kinetic model, cat no. LCTLRNM-36-FO-CDL or techno-commercial equivalent model of other specified makes. |
| 28 | Supply and fix Double Door Vertical DB Triple pole Neutral 8 Way 415 Volt MCCB as incomer, MCCB and MCB SP as out goings as per site requirements with suitable manufacturers rated Bus Bar including necessary dummy plate complete all as required and directed by Engr-in-Charge. Note- Cutting, grooving as required and making good after works to match with the adjoining surfaces is the responsibility of the bidder, the cost inclusive in the quoted rate. |
| 29 | Supply and fix MCCB, 4Pole, 100 Amps, 415 Volt, 50 Hz, not less than 25 KA using copper lugs for terminations complete all as directed by Engr-in-Charge.. |
| 30 | Supply and fix, MCB DB SPN 8 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated,IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. |
| 31 | Supplying and fixing single pole and neutral63A rating.240 V,10KA,\"C\" curve miniature circuit beaker suitable for MCB DB complete with connection,testing and commssioning etc.as required |
| 32 | Supply and fix MCB SP 10/16/20 Amp 240 Volts 10 KA C curve using copper lugs for terminations complete all as specified and directed. |
| 33 | Supply and fixing of medium class PVC conduit not les than 25 mm dia, along with fixing accessories in recessed including cutting of wall and making good the in case of recessed conduit as required and complete all as directed by Engr-in-Charge (For users Lan/Telephone point, layout asprovided by users). |
| 34 | M&L Wiring for circuit/ submain wiring with 4 X 16 sq. mm FRLS PVC insulated copper multi strandard conductor, single core cable plus 2 X 16 sq. mm earth wire, green colour, FRLS PVC insulated copper multi strandard conductor, single core cable in and inculding recessed medium class PVC conduit of dia not less than 40 mm complete all as directed by Engr-in-Charge. Note: 4 runs of 16 sqmm cable, 2 runs of earth wire and a run of 40mm PVC conduit pipe will be measured as one unit. |
| 35 | M&L Wiring for circuit/ submain wiring with 2 X 10 sq. mm FRLS PVC insulated copper multi strandard conductor, single core cable plus 1 X 10 sq. mm earth wire, green colour, FRLS PVC insulated copper multi strandard conductor, single core cable in and inculding recessed medium class PVC conduit of dia not less than 25 mm complete all as directed by Engr-in-Charge. Note:2 runs of 10 sqmm cable, 1 runof earth wire and a run of 25mm PVC conduit pipe will be measured as one unit. |
| 36 | M&L Wiring for circuit/ submain wiring with 2 X 6 sq. mm FRLS PVC insulated copper multi strandard conductor, single core cable plus 1 X 6 sq. mm earth wire, green colour, FRLS PVC insulated copper multi strandard conductor, single core cable in and inculding recessed medium class PVC conduit of suitable diacomplete all as directed by Engr-in-Charge. Note:2 runs of 6 sqmm cable, 1 runof earth wire and a run ofPVC conduit pipe will be measured as one unit. Note for Sl Item No. 32 to 35 - Cutting, grooving as required and making good after works to match with the adjoining surfaces is the responsibility of the bidder, the cost inclusive in the quoted rate. |
| 37 | Taking down existing Copper/Aluminium point wiring (Light /Fan/ socket or power skt) complete including fixtures and fittings such as switches, ceiling roses, pendent, regulators,sockets light fittings etc.,for taking credit and making good disturbed surfaces of walls,ceiling,etc complete all as directed by Engr-in-Charge. |
| 38 | Taking down existing DBs of any type including MCBs of any type model from existing location and making good complete all as directed by Engr-in-Charge. |
| 39 | Taking down old existing sub main wiring of any type size from existing location and making good complete all as directed by Engr-in-Charge. |
| 40 | Taking down old existing light fittings of any type size from existing locations and refixing in directed locations including making good complete all as directed by Engr-in-Charge. |
| 41 | Taking down existing exhaust / ceiling fan of any type, size from existing locations, kept a side carefully, cleaning servicing and refixing the same in the directed location by the Deptt complete all as directed by Engr-in-Charge. |
| 42 | Supply, Install, Testing and Commissioning inverter type, 5 star rated, adjustable type Cassette split unit with indoor/outdoor units of capacity 2.0 TRcomplete with cordless remote control unit, with in built filter as per latest manufacturer\"s model for better indoor air quality complete all as directed.Note - 1) BEE rating of manufacturer model shall be of latest current year. 2)Copper pipings, insulation material of required sizes, drain out PVC pipe and control cable shall be measured and paid seperately. |
| 43 | Supply and fixing wall mounted heavy duty, factory made, powder coated steel brackets for outdoor units suitable for 2.0 Ton AC out door unit complete. |
| 44 | Supply, laying and testing copper piping 1/4 inch dia with suitable insulation material complete. |
| 45 | Supply, laying and testing copper piping 5/8 inch dia with suitable insulation material complete. |
| 46 | Supply, laying and testing FRLS PVC insulated copper multi strandard conductor, multi core copper cable of size 2.5 sq mm , 4 core complete. |
| 47 | Supply, laying and testing FRLS PVC insulated copper multi strandard conductor, multi core copper cable of size 2.5 sq mm ,3 core complete. |
| 48 | Supply, laying and testing drain water piping with 20 mm PVC pipe complete all as directed |
| 49 | Supply and fix, MCB DB SPN 6 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated,IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. |
| 50 | Supply and fix concealed Double Door Vertical DB Triple pole Neutral 4 Way 415 Volt MCCB as incomer, MCCB and MCB SP as out goings as per site requirements with suitable manufacturers rated Bus Bar including necessary dummy plate complete all as required and directed by Engr-in-Charge. Note- Cutting, grooving as required and making good after works to match with the adjoining surfaces is the responsibility of the bidder, the cost inclusive in the quoted rate. |
| 51 | Supplying and fixing SPN Industrial type socket outlet, 20 A, 240 V, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, concealed, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete including taking down,all as specified . |
| 52 | Removing split type ACs 2.0 TR capacity working on 230 Volts, single phase complete from the existing location including taking down indoor and out door units carefully with connected existing wirings, control cable, copper pipe etc and refixing the same in the directed location by the Deptt, testing complete all as directed. Note - Wiring works, plug & socket, bracket, copper pipe and control cable shall be measured and paid separately under relevent item here-in-above during refixing the item . |
AI Tender Summary
Tender Timeline
Mar 22, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 29, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 01, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender