Water Resources Department-WRD has published Tender For Repair And Maintenance Of Inlet Gate And Fixing Of Stair Of Inlet Gate At Rd 1600 Of Kaithal Drain Damaged Due To Heavy Flood Of 2024 Falling In Vill. Khanouri Kalan In Tehsil Moonak In District Sangrur.. Submission Date for this Tender is 02-05-2024. Dam Gate Tenders in sangrur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Mar-2024 | dateextend1 | Date | 03-04-2024 |
| 2 | 02-Apr-2024 | dateextend2 | Date | 15-04-2024 |
| 3 | 15-Apr-2024 | dateextend3 | Date | 25-04-2024 |
| 4 | 24-Apr-2024 | dateextend4 | Date | 02-05-2024 |
| FileName | File Description | File Size |
| ed304ff3-570a-49a8-9c1d-5fd6c80c0469.html | Tender Notice | 0 KB |
| BOQ_Repair_KaithalDrain.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Commissioning and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge |
| 2 | Removing damaged old rubber seal bulb or flat including clamp plate of all sizes and types. |
| 3 | Removing and fixing of roller pins in position complete in all respect and to entire satisfaction of engineer incharge (upto 75mm/above 75mm) |
| 4 | Providing and fixing of Guide Rollers/ Rack Roller of Gates i/c machining, finishing and annealing treatement of steel complete in all respect and to entire satisfaction of engineer in-charge. |
| 5 | Providing Gun Metal Bush Assemblyi/c machining and finishing complete in all respects and to entire satisfaction of Engineer-in-charge |
| 6 | Providing of roller pin, main shaft, handle shaft, tie rod, gate handleetc in position i/c machining, finishing and annealing treatement of steel complete in all respect and to entire satisfaction of engineer in-charge. |
| 7 | Providing Hollow Bulb Seal and fixing in position including preparation of suface complete in all respects and to entire satisfaction of Engineer-in-chargeof size 100mm x 44 mm dia |
| 8 | Providing solid Bulb Seal and fixing in position including preparation of suface complete in all respects and to entire satisfaction of Engineer-in-chargeof size 100mm x 44 mm dia |
| 9 | Providing and Fixing in Position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 80x12mm. |
| 10 | Providing and Fixing in Position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 120 x 20 mm |
| 11 | Providing and Fixing Galvanized Nut and Bolts of all Sizes and length requiredand to entire satisfaction of Engineer-in-charge. |
| 12 | Supply of Multipurpose synthetic hetiv Grease Complete in all respects and to entire satisfaction of engineer-in-charge. |
| 13 | Oiling and greasing of gates |
| 14 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (iv) 12 mm wide. |
| 15 | Crane Charges for fixing of gate stair, loading/ unloading and refitting of gates at site (35 T) |
| 16 | Scrapping, brushing to remove paint to bare metal surface. |
| 17 | Applying priming coat with metal primer on new steel or iron work i/c preperation of surface. |
| 18 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 19 | Painting two or more coats with anticorrosive bitumastic Paint to give an even shade with special quality paint. |
| 20 | Any other item. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
