Tender For Installation Of Open Gym Equipment At Various Location, ajmer-Rajasthan

Installation Of Open Gym Equipment At Various Location I- 1 S / F Of Surfing Board -: Surf Board ( Double ) -010 Surf Board Is Unique Exercise For Increasing The Flexibility Of Legs From Left End To Right And Again From Right To Left End. 2 Surfing Board Providing And Fixing Of Surfing Board Of Size Not Less Than 1000Mm ( Length ) X 600Mm ( Width ) X 1400Mm ( Height ) , To Build Up The Muscle Groups Of The Waist, Enhance The Body Coordination And Flexibility. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. The Footrests Shall Be Made From High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nut Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powder Of Ackzonoble / Berger / Nerolac With Minimum 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Full Fil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 1. 3 Cross Trainer Providing And Fixing Of Cross Trainer Of Size Not Less Than 1320Mm ( Length ) X 600Mm ( Widux1750mm. ( Height ) , To Enhance The Mobility Of Upper And Lower Limbs And Improve The Flexibility Of Joints. The Main Structure Frame Shall Be Made From G.1. Pipe Minimum Of 80N C Class Welded With M.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. The Hand Frame Shall Be Made Up Of At Least 25Nb C Class G.I. Pipe. The Footrests Shall Be Made From Aluminum Casting Material Of Size Not Less Than 130 Mm X 310Mmx5mm Thickness A Mounted On M.S. Plate Of Size 130Mmx310mmx3mm Thick. High Tensile Steel With Galvaniz [ 3:23 Pm, 25 / 02 / 2022 ] Prasoon: Nuts And Bolts Shall Be Used For Assembly. [ 3:32 Pm, 25 / 02 / 2022 ] Prasoon: Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble / Berger / Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete The Directions Of Engineer-In-Charge To Full Fil. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 4 Thai-Chispinner ( 2 Wheel ) Providing And Fixing Of Thi-Chi Spinner ( 2 Wheel ) Of Size Not Less Than 700Mm ( Length ) X 1000Mm ( Width ) X 1280Mm ( Height ) , To Increase Mobility Of Shoulder -Elbow And Hip-Knee. The Main Structure Frame Shall Be Made From G.1. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least Ø250 Mm & 10Mm Thick. High Tensile S.S. Nut Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble / Berger / Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Fulfil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 3. 5 Seated Pullerproviding And Fixing Of Seated Puller Of Size Not Less Than 1900Mm ( Length ) X 740Mm ( Width ) X 1920Mm. ( Height ) , To Enhance The Strength Of Upper Limbs And The Muscles In Chest And Back And Promote Cardio- Pulmonary Function. The Main Structure Frame Shall Be Made From G.1. Pipe Minimum Of 80Nb C Class Welded With Ms. Round Base Plate At Least 250 Mm & 10Mm Thick. The Handle Frame Shall Be Minimum Of 32Nb C Class Gl. Pipe. The Seat Frame Minimum Of 32Nb C Class G.1. Pipe, Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts & Bolts Shall Be Used For Assembly. The Wder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble Berger / Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Full Fil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 4. 6 Leg Press Providing And Fixing Of Leg Press Of Size Not Less Than 1840Mm ( Length ) X 360Mm ( Width ) X 1560Mm. ( Height ) , To Build Up The Muscles Of Thigh And Enhance The Strength Of Waist. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least Ø250 Mm & 10Mm Thick. The Sleeve Frame Minimum Of 100 Od And Of M.S. Seamless Pipe With Thickness 5Mm. This Sleeve Should Be Disassembled From Main Frame. The Footrests Shall Be Made From Casted Aluminum Material, Having Sizes Minimum Of 130Mm X 310Mm X 5Mm Thick. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nut Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powder Of Ackzonoble / Berger / Nerolac With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In- Charge To Full Fil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 5. 7 Sit Up Board Double Providing And Fixing Of Sit Up Board Double Of Size Not Less Than 1760Mm ( Length ) X 1140Mm ( Width ) X 660Mm ( Height ) , To Enhance The Flexibility Of Whole Body. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. The Remaining Frame Of The Sit Up Board Minimum Of 32Mm Nb Shall Be Made From C Class Gl Pipe. The Powder Coating Shall Be Done With Pure Polyester Powder Ackzonoble / Berger / Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Full Fil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 6. 8 Chest Press Providing And Fixing Of Chest Press Of Size Not Less Than 2000Mm ( Length ) X 710Mm ( Width ) X 2200Mm. ( Height ) , To Enhance The Strength Of Upper Limbs And The Muscles In Chest & Back And Promote Cardio Pulmonary Function. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least 250 Mm & 10Mm Thick. The Handle Frame Shall Be Made Up From At Least 32Nb C Class G.I. Pipe. The Seats And Back Rests To Be Fitted On The Outer Frames Shall Be Made Up Of M.S. Sheet Of Size Not Less Than 330Mm X 300 Mmx2mm Thickness. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts & Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble / Berger / Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Full Fil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 7. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 9 Four Seater See Saw Providing And Fixing Of Four Seater See Saw Of Size 5.5 X 6.25 X 2.5 Feet Fabricated With A Center Pipe / Frame Of 50 Nb Shall Be Made From C Class G.1. Material. The Bottom Shall Be Welded With Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness. The Bottom Frame Of 32Nb Shall Be Made From C Class G.I. Pipe. The Handle Frame Of 25Nb Shall Be Made From C Class G.I. Pipe. The Foundation Should Be Used For Fixing Is A Structure And Shall Be Made From Center Pipe Of G.I. Of 50 NbC Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Shall Be Supported With 25 Mm X 25Mm M.S. Angles Of 3 Mm Thickness And 20Mm X 40Mm Crc Square Pipes Of 3Mm Thickness. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts And Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness, All Complete As Per Drawing, Design, Directions And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour ( Of Metal, Seat And Pedal ) , And Fixing Of Equipment Etc. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 10 Chins Ups &Push Up Bars Providing And Fixing Of Chinsup & Push Up Bars Of Size Not Less Than 1220Mm ( Length ) X 550Mm ( Width ) 1700Mm. ( Height ) , To Enhance The Strength And Stamina Of The Body. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. The Handle Frame Minimum Of 25 Nb Shall Be Made From C Class G.I. Pipe. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts & Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powders Of Ackzonoble / Berger / Nerolac Paints With 60 To 70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In-Charge To Fullfil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 12. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 11 Wave Slide S / F Of Providing& Installation The Equivalent Wave Slide Recommended Age 4-12 Year Required Area 4.80X0.5M. Safe Play Area 508X1.5 M . The Platform Heights 2.1 M. The Chute Is Made Up Of 4Mm Thick Frp. The Slide Length Is 3.0 M . The Ladder Frame Is 25 Mm Nb Pipe The Hand Rail Is Mad Up Of 25 Mm Nb Pipe B Class Complete As Per Manufacture Specification & As Per Direction Of Engineer Incharge 12 Mild Steel Monkey Bar Open Gym S / F Calisthenics Station With Monkey Bars To Diversifyworkout And Train Not Only Indoors In The Home Gym, But Also Outdoors In The Garden In The Fresh Air? At K-Sport You’Ll Find The Right Equipment For Your Ambitious Street Workout. With This Multifunctional Calisthenics Station With Monkey Bars, Your Garden Becomes A Street Workout Park.Technical Datamaterial Mild Steelapplication Outdoor Gympipe Shape Roundno Of Pole4 & 16Horizantal Barsheight8 Feetthese Outdoor Gym Equipment Are As Per En 16637 International Specification. This Equipment Is Rust Free And Ensures Smooth Movement. Highly Durable And Stable.Powder Coatedsolid Steel Frame 13 Air Walker Outdoor Gym Equipment Air Walker For Open Gym, Model No.: Jmg-001S / F Of Air Walker Product Specifiation Power Model No. Jmg-001Usag Gym, Outdoor Exercise Equipmentcondition Newpipe Dimensions 114 Mm Dia X 2.5 Mm Thickpipe Material Gi- Equipment Made To Meet En16630 Specification- European Standard For Permanently Installed Outdoor Fitness Equipment.- Epoxy Coating Of At Least 100 Micron To Prevent Any Damage From Weather Conditions.* Thick Galvanized Main Post Of 114 Mm Diameter.* Thickness Of Pipes Varies Between 3.5 Mm To 7.5 Mm.* Self Lubricating German Bearing For Maintenance Free Usage.* Rain Forced Foot Pedals For Extended Life.* J Hook System With 18 Mm Thickness Used For Grouting For Stability And Ease Of Installation.* Non Fading Virgin Lldpe Makes All Plastic Components Sun Fade Resistant.* All Open Ends Of Pipe Either Sealed In Or Closed By Gi / Lldpe Cap For User Safety. 14 Pommel Horse Providing And Fixing Of Pommel Horse Of Size Not Less Than 2150Mm ( Length ) X 800Mm ( Width ) X 800Mm. ( Height ) , To Enhance The Flexibility Of Lower Limbs, Waist And Abdomen. The Main Structure Frame Shall Be Made From G.I. Pipe Minimum Of 80Nb C Class Welded With M.S. Round Base Plate At Least 0250 Mm & 10Mm Thick. The Handle Frame Be Minimum Of 32Nb Shall Be Made From C Class G.I. Pipe. Closing Caps Shall Be Made Up Of High Quality Fiber Reinforced Plastic Material. High Tensile Steel With Galvanized Nuts And Bolts Shall Be Used For Assembly. The Powder Coating Shall Be Done With Pure Polyester Powder Ackzonoble / Berger / Nerolac Paints With 60 To70 Micron Thickness, Complete In All Respect Including Fixing The M.S. Holdfast In Cement Concrete To Hold The Whole Structure, Under The Directions Of Engineer-In Charge To Full Fil The Functional Requirement. The Indicative Design / Photo Is As Per Enclosed Photo No. 8. ( The Cement Concrete And Excavation Work Shall Be Paid Separately ) . 15 Instrutional Sign Board 4*6 16 Cement Concrete Work With Cement Blocks At The Area Of Gym Installed As Per Site Condition And Rates Are Taken As Per Bsr Area Lump Sump 112 Sqm.

Refer document

Refer document

Refer document

Name of Work: Installation of Open Gym Equipment At Various Location

Sl. No.	Item Description
1	S/F of Surfing Board -: Surf Board (Double) -010 Surf Board is unique exercise for increasing the flexibility of legs from left end to right and again from right to left end.
2	Surfing Board Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1.
3	CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The Hand Frame shall be made up of at least 25NB "C" Class G.I. Pipe. The footrests shall be made from Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz [3:23 pm, 25/02/2022] Prasoon: nuts and bolts shall be used for assembly. [3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in-charge to full fil. (The cement concrete and excavation work shall be paid separately).
4	THAI-CHISPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with M.S. round base plate at least Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3.
5	SEATED PULLERProviding and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio- pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB "C" class welded with MS. round base plate at least 250 mm & 10mm thick. The handle frame shall be minimum of 32NB "C" class GL. pipe. The seat frame minimum of 32NB "C" class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4.
6	LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5.
7	SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from "C" class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6.
8	CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 250 mm & 10mm thick. The handle frame shall be made up from at least 32NB "C" class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm X 300 mmX2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately).
9	FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAW of size 5.5 X 6.25 X 2.5 Feet fabricated with a Center Pipe/ Frame of 50 NB shall be made from "C" Class G.1. material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe. The handle frame of 25NB shall be made from "C" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB"C" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).
10	CHINS UPS &PUSH UP BARS Providing and fixing of CHINSUP & Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from "C" Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately).
11	Wave slide S/F of providing& installation the equivalent wave slide recommended age 4-12 year Required area 4.80x0.5m. Safe play Area 508X1.5 m . The platform Heights 2.1 M. The chute is made up of 4mm thick FRP. The slide length is 3.0 m . The ladder frame is 25 mm NB pipe the hand rail is mad up of 25 mm NB pipe B class complete as per manufacture specification & as per Direction of Engineer incharge
12	Mild Steel Monkey Bar Open Gym S/F CALISTHENICS STATION WITH MONKEY BARS To diversifyworkout and train not only indoors in the home gym, but also outdoors in the garden in the fresh air? At K-Sport you’ll find the right equipment for your ambitious street workout. With this multifunctional calisthenics station with monkey bars, your garden becomes a street workout park. TECHNICAL DATA Material Mild Steel Application Outdoor Gym Pipe Shape Round No of Pole4 & 16Horizantal Bars Height8 Feet These outdoor gym equipment are as per EN 16637 international specification. This equipment is rust free and ensures smooth movement. Highly durable and stable. Powder coated Solid steel frame
13	AIR WALKER Outdoor Gym Equipment Air Walker for open gym, Model No.: JMG-001S/F of Air walker product specifiation power Model No. JMG-001Usag Gym, Outdoor Exercise Equipment Condition New Pipe Dimensions 114 mm dia x 2.5 mm thick Pipe Material GI - Equipment made to meet EN16630 specification- European Standard for Permanently installed outdoor fitness equipment. - Epoxy coating of at least 100 micron to prevent any damage from weather conditions.* Thick galvanized main post of 114 mm diameter.* Thickness of pipes varies between 3.5 mm to 7.5 mm.* Self lubricating German bearing for maintenance free usage.* Rain forced foot pedals for extended life.* J hook system with 18 mm thickness used for grouting for stability and ease of installation.* Non fading Virgin LLDPE makes all plastic components sun fade resistant.* All open ends of pipe either sealed in or closed by GI/LLDPE cap for user safety.
14	POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lower limbs, waist and abdomen. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from "C" Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately).
15	Instrutional Sign Board 4*6
16	Cement concrete work with cement blocks at the area of gym installed as per site condition and rates are taken as per BSR Area lump sump 112 Sqm.