Tender For Pr - 33401489 - Cs Pipe - Amns Hazira, Hazira-Gujarat

Tender For Pr - 33401489 - Cs Pipe - Amns Hazira 33396326 0002 0001 300109887 PIPE,LINE,102.30X114.30X6MM,ASTM A53,40 Technical Details Name : Dipak Patel Contact : Email : DIPAK.PATEL@AMNS.IN 100 M PIPE,LINE,SIZE: 100 MM, INSIDE DIAMETER: 102.30 MM, OUTSIDE DIAMETER: 114.30 MM, THICKNESS: 6.00 MM, SCHEDULE: 40, ENDS: BEVEL, RATING: 16 KG/CM2, PROCESS: ERW, MATERIAL: CARBON STEEL, SPECIFICATION: ASTM A53, GRADE: B, DIMENSION STANDARD: ANSI B36.10 Item Details : INSPECTION CLAUSE: FOLLOWING CERTIFICATE TO BE SUBMITTED BY VENDOR BEFORE DISPATCH ***Need Hydro test report required due to this pipe used for NG line... 1) Before manufacturing start vendor will submit QAP and to be approved from AMNS. 2) Before manufacturing start Manufacturing drawing to be approved from AMNS. 3) Material shall be crack and porosity free, UT report of the material to be given before despatch 4) For Forged material preparation and sample marking will be witnessed by AMNS INDIA Steel and reports will Will be reviewed by AMNS. 5) Material must be as required grades mentioned in our drawing only. 6) Material test certificates for chemical and physical properties must be provided prior to dispatch the material 7) Dimensional report to be provided for approval prior to dispatch the material. 8) Heat Treatment report (if required) shall be provided prior to dispatch the material 9 )DP test report (if required) shall be provided prior to dispatch the material. Item Note : 2 33396326 0003 0002 300438679 PIPE,LINE,6INCH,7.11MM,40,BEVEL,CS,A53 Technical Details Name : Dipak Patel Contact : Email : DIPAK.PATEL@AMNS.IN 100 M PIPE,LINE SIZE : 6 INCH , GRADE : B , DIMENSION STANDARD : ASME B36.10 INSIDE DIAMETER : 154.08 MM , OUTSIDE DIAMETER : 168.3 MM THICKNESS : 7.11 MM , SCHEDULE : 40 , ENDS : BEVEL PROCESS : SEAMLESS , MATERIAL : CARBON STEEL SPECIFICATION : ASTM A53 Item Details : INSPECTION CLAUSE: FOLLOWING CERTIFICATE TO BE SUBMITTED BY VENDOR BEFORE DISPATCH ***Need Hydro test report required due to this pipe used for NG line... 1) Before manufacturing start vendor will submit QAP and to be approved from AMNS. 2) Before manufacturing start Manufacturing drawing to be approved from AMNS. 3) Material shall be crack and porosity free, UT report of the material to be given before despatch 4) For Forged material preparation and sample marking will be witnessed by AMNS INDIA Steel and reports will Will be reviewed by AMNS. 5) Material must be as required grades mentioned in our drawing only. 6) Material test certificates for chemical and physical properties must be provided prior to dispatch the material 7) Dimensional report to be provided for approval prior to dispatch the material. 8) Heat Treatment report (if required) shall be provided prior to dispatch the material 9 )DP test report (if required) shall be provided prior to dispatch the material. Item Note :

Refer document

Refer document

Refer document