Military Engineer Services-MES has published Tender For Additional/Alternator To Building No P 412 At Zone J In Mil Station Agartala. Submission Date for this Tender is 01-04-2024. Mobile Generator Tenders in Agartala Tripura. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-04-2024 |
| Sl. No. | Item Description |
| 1 | Surface excavation n exc. 30cm deep and averaging 15cm deepin soft / loose soil, and removing rubbish upto a distance n.exc. 50 m all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Material and labour for hardcore of broken stone or bouldersof guage n exc 63mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed |
| 4 | Material and labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etccomplete all as specified and as directed. |
| 5 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 6 | Removing excavated soil to a distance exc 250m but n exc 500mand deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point completeall as specified and as directed. |
| 7 | Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point completeall as specified and as directed. |
| 8 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work. |
| 9 | Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed. |
| 10 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work. |
| 11 | Material and labour for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shapewith rough finished surfaces of concretecomplete all as specified and as directed. |
| 12 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work. |
| 13 | Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed. |
| 14 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in Chajjas complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work. |
| 15 | Material and labour for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished surfaces of concrete flat complete all as specified and as directed. |
| 16 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 17 | Material and labour for Mild steel TMT bars 5mmdia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 18 | Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 19 | Material and labour for 75 mm thick PCC (1:3:6) type C-1 (using 20mm graded brick aggregate) as in sub base to receive the finishes completeall as specified and as directed. |
| 20 | Material & Labour forVitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I). |
| 21 | Material & Labour forVitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM(1:4) complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I). |
| 22 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 23 | Material and labour for PCC (1:2:4) type B0 (using 12.50 mm graded stone aggregate) as in surface channel/drain etccomplete all as specified and as directed |
| 24 | Materials and labour for 15 mm thick rendering on other than fair faces brick work in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cementcomplete all as specified and as directed. |
| 25 | Materials and labour for 15 mm thick rendering on fair faces ofbrick work or concrete surface in cement mortar (1:4) in two separate coats (10mm thick backing coat and 5mm thick finishing coat).Finishing coat shall be mixed with liquid water proofing compound @ 200 ml per bag of cement andfinished the surfaceseven and smooth without using extra cementcomplete all as specified and as directed. Note : Liquid WPC will be measured and paid separately under respective items. |
| 26 | Supply only liquid water proofing compound complete all as specified and directed. |
| 27 | Materials and labour for preparing newly plastered wallsurfacesandapplying two coats of oil bound distemper over a coat of primer, over 2 mm thick wall care putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the wall surfaces complete all as specified and as directed. |
| 28 | Materials and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 2 mm thick wall care putty on new plastered surfaceswith preparation of new plastered surfaces acomplete all as specified and directed. |
| 29 | Material and labour for rolled mild steel for roof trusses ( framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 30 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. |
| 31 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. |
| 32 | Supply and fixing Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed. |
| 33 | Material and labour for preparation of steel surface over 10cm width or girth and applying two coats of syntheticenamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 34 | Supply and fixing powder coated (minimum 50 micron thick) aluminium sliding type, three track window (two glazed and one gauged shutter), aluminium section weighing not less than 1.67kg/m for frame and 0.55 Kg /for shutterincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle (1 no.) and 5.50mm thick plain / tinted glass, aluminium mosquito proof gauge and locking device including taking down old existing steel window and making good disturbed surface of wall complete all as specifiedcomplete all as specified and as directed. (Note: Window opening size to be measured for payment purpose.) |
| 35 | Supply and fix mild steel work such as grills,gratings,guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed. |
| 36 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 37 | Supply and fixing powder coated aluminium (minimum 50 micron thick) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including at the cost of EPDM rubber / neoprene gaskit required with extruded built up standard tubular section/apprioriate Z sections abd other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasterners of required dia and size, including fillings up the gaps at jucntions i;e; a top, bottom and sides with required EPDM rubber/neoprene gaskit etc.Alumminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat anglealuminium snap beading for glazing/paneleling, stainless steel screws alongwith 2 Nos. of decorative type 15mm dia aluminium disc handle and 01 No. 200 mm long aluminium tower bolt per shutter complete all as specified and as per direction of Engineer in charge. |
| 38 | Supply and fixing5.50 mm thick ordinary quality of galzing with rubber gasket in aluminium frame areaexe 0.50 Sqm in each pane complete all as specified and directed. |
| 39 | Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dutycomplete all as specified and directed. |
| 40 | Material and labour for preparation of new steel surfaces to receive painting n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 41 | Supply and fixing 12mm thick flat plain toughned glass fixed on wall with stainless steel L Shape clamps and screws of suitable size minimum 04 Nos in each sqm complete all as specified and directed by Engr-in-Charge. |
| 42 | Matrial and labour for RCC 1:1.5 :3 using 20mm graded stone aggrigate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the lilke wk complete all as specified and directed. |
| 43 | Matrial and labourformwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 44 | Supply and fixing for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, window cills, cooking platforms and like etc and fixed over and including 20mm thick screed bedin cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed. |
| 45 | Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 sqcm but not exc.25 Sqcm complete all as specified and as directed. |
| 46 | Supply and fixed 18/19mm thick, prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails in cupboard partion etc or in narrow widths n exc 15cm each, rebated or flat edged complete all as specified and as directed. |
| 47 | Material and labour for teak wood lipping 6 mm thick for block board or veneered particle board fixed with nails complete all as specified and directed. |
| 48 | Supply &fixing 40mm dia copboard knobs fixed with nut, screw and washer of brass polished. complete all as specified and as directed |
| 49 | Supply &fixing hasp and staple of size 100 mm, safety type of aluminium anodised including bolt to hinge plate, fixed with screws complete all as specified and as directed. |
| 50 | Supply and fixing100 mm size type B-21, Butt hinges, heavy weight, cold rolled mild steel with galvanised MS sheet hinges pin anodised complete all as specified and directed. |
| 51 | Material and labour well-seasoned second class hard wood Weather boarding, clean sawn, plain both side, fixed with butt joints with nails, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 52 | Material and labour for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oilcomplete all as specified and as directed. |
| 53 | Material and labour forpreparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed. |
| 54 | Supply & Fix in repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers etc complete all as specified and as directed. |
| 55 | Material and labour for treating the soil along with external perimeter of building @ 2.25 litre of anti termite chemical emulsion / m of the perimeter wall complete all as specified . |
| 56 | Material and labour for treatment of soil under existing floors using anti termite chemical emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM (1:2) to match the existing floors complete all as specified . |
| 57 | Taking down cement/lime plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. complete all as specified and as directed. |
| 58 | Material and labour for cutting holes inbrick work , built in cement mortar depth of cutting exc half brick but not exc one brick andmaking good the surfaces in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) after fixing of hold fasts/ lugs and like etc complete all as specified and as directed.Note : Cutting hole should be carried out by mechanical mean only. |
| 59 | Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centrecomplete all as specified and as directed. |
| 60 | Supply and fixiing gypsum board 12 mm thick in ceiling fixed with screws as per manufacturer"s instructionscomplete all as specified and as directed. |
| 61 | Material and labour for preparingnew surfaces ofceiling andapplyingtwo coats of oil bound distemper complete as specified and as directed. |
| 62 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 63 | Materials and labour for half brick thick brick work with sub class "B" bricks straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified andas directed. |
| 64 | Material and labour for pre-polished machine pressed chequred tiles 25cm x 25cm x 20-22mm thick, in floor, set jointed and pointed in grey cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 65 | Material and labour filleting in any position and to any shape in cement lime mortar 1:1:6 in cement mortar 1:4including all mitres, stops, etc cross sectional area exc 25 sqcm and n exc 50 sqcmcomplete all as specified and as directed. |
| 66 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, laid in trenches or floor complete all as specified and as directed. |
| 67 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints fixed to wall complete all as specified and as directed. |
| 68 | Supply and fixing 110 mm bore PVC (SWR) bends in any types complete all as specified and directed. |
| 69 | Taking down carefullyexisting copper/Aluminum point wiring (light,socket or power) complete includingfittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 70 | Material and labour for point wiring (concealed type) for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size ofGI /metal flush box of thickness not less than 0.8 mm duly painted with black bitumen paint over a coat of red oxide primer & providing 3mm thick plastic laminated bakelite sheet & fancy top cover for housing of switches, sockets and regulator etc. and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one wayswitch complete all as specified as directed.Note for item Nos.70 to 73: (i) Cutting chased will be carried out by using mechanical means like groove cutter/wall chaser and payment for the same shall be deemed to be included in the quoted rate. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate |
| 71 | .-Ditto- all as per item No 70.00 here-in-before butfor 3/5 pin 6 amps socket outlet on the same board . |
| 72 | .-Ditto- all as per item No 70.00 here-in-before butfor 3/5 pin 6 ampssocket outlet on the independant board |
| 73 | Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLSH unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size ofGI /metal flush box of thickness not less than 0.8 mm duly painted with black bitumen paint over a coat of red oxide primer & providing 3mm thick plastic laminated bakelite sheet & fancy top cover for housing of switches, sockets and regulator etc. and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one wayswitch complete all as specified as directed. |
| 74 | Material and labour for modular socket, two module, multi purpose 2 in 1, 3/5 Pin 15 Amps, flush type ISI marked complete all as specified and as directed. |
| 75 | Material and labour for modular switch 1 way 16A, 1 module complete all as specified and as directed. |
| 76 | Supply and fixing Buzzer, Ding dong AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 77 | Supply and fixing modular bell push, one module, 6 Amps, 230 volt flush type complete all as specified and as directed. |
| 78 | Material and labour for modular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 79 | Material and labour for modular socket 6A, 3 pin combined, 2 module complete all as specified and as directed. |
| 80 | Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 50mm,ISI marked three terminals complete all as specified & directed. |
| 81 | Supply and fixing modular fan regulator two module (step rotary type), AC 240 voltcomplete all as specified and as directed. |
| 82 | Supply and fixing in repairs MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush conceal in wall including making good disturbed surfaces complete all as specified and as directed. |
| 83 | Supply andfixing MCB single pole 6 to 32 amps, 240 volts, 10 KA, "B" series with all incoming / outgoing connections with proper size of lugs complete inculdingtaking down the old unserviceable one all as specified as directed. |
| 84 | Supply and fixing MCB, single pole & neutral having braking capacity 10 KA, "B" series with all incoming , outgoing connections with proper size of lugs , 40 Amp, 240 volts including taking down the old unserviceable complete all as specified & directed.Note :MCB and MCB DB shall be of same make as approved by AGE (I). |
| 85 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed. |
| 86 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra payment from the department. |
| 87 | M & L for surface sub main wiring(Concealed type) with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) concealed through 20mm dia PVC conduit pipe medium grade with fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces inculdingtaking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 4.00 Sqmm cable and one run of PVCconduit pipe shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) Cutting chased will be carried out by using mechanical means like groove cutter/wall chaser and payment for the same shall be deemed to be included in the quoted rate. |
| 88 | M & L for surface sub main wiring (Concealed type) with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) concealed through 20mm dia PVC conduit pipe medium grade with fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces inculdingtaking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 6.00 Sqmm cable and one run of PVCconduit pipe shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) Cutting chased will be carried out by using mechanical means like groove cutter/wall chaser and payment for the same shall be deemed to be included in the quoted rate. |
| 89 | S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1x20 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm with suitable flexible hose and making good the disturbed surfaces to match with existing surface complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 90 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 91 | Supply and fix environment friendly, energy saving, surface mounted , decorativebulk headfittings, LED luminaries 10W or min 800 lumens with IP 65 with suitable fixing arrangement complete with all accessaries internally prewired and including connecting up with and including twin core twistedflexible copper conductor cable of suitable sizein flexible conduitcomplete all as specified and directed. |
| 92 | Supply and fixing in repairs ultra modern, recessed mounting, 36 W, 6500K, 220V LED luminarie 600mm x 600mm suitable for ceiling complete with electronic driver and high brightness. complete all as specified and directed. |
| 93 | Supply and fixing in repairs MCB DB, TPN, 4 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall including making good disturbed surfaces complete all as specified and as directed. |
| 94 | Supply andfixing surface mounted single pole and neutral enclosures with a two pin and earth plug socket complete with single pole MCB, "B" series, 20 Amps, breaking capacity 10 KA and making good the disturbed surface and matching to the existing surface with all incoming / outgoing connections with proper size of lugs complete inculdingtaking down the old unserviceable one all as specified as directed. |
| 95 | Supply andfix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, "B" series with all incoming / outgoing connections suitableforDB in double door with proper size of aluminium lugs completeall as specified as directed . Note all MCB and MCB DB shall be of same make as approved by AGE (I). |
| 96 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed. |
| 97 | Supply, laying connecting and testing XLPE insulated (Earthed) cable in trenches / or fixed on pole etc in screenedPVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with stranded alluminium conductor, 1100V grade, cross sectional area 25 Sqmm, 4 core, Confirming to IS-7098 (Part-II) 1985 complete all as specified and as directed. Note : Earth workwill be measured and paid separately under respective item. |
| 98 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cableincludingspreading and punning down to desired thickness complete all as specified and as directed.(Note: Punned thickness shall be measured for payment purpose) |
| 99 | Material and labour for well burnt subclass "B" bricks laid flat width wise along the length of cable for cable protection complete all as specified and directed. |
| 100 | Supply ,Installation Testing & Commissioning of factory made powder coated (Conforming to the norms of CPRI ) outdoor with canopy type, dust and vermine proof, weather proof Feeder Pillar Box of sizenot less than 0.75 mtr x 0.60 mtr x .45 mtr (HxLxB) compartmentalised made out of 3.15mm thick CRCA steel sheet inner shell made 2.00 mm thick CRCA sheetand angle iron 40 mm x 40 mm x 6 mm , powder coated over one coat of red oxide primer suitably grouted inPCC -1:2:4 type B1, using 20 mm graded stone aggregrate, including aluminium bus bar , internal wiring with PVC insulated single core cables of copper conducter of suitable size duly numbered with tags for the circuits with hinged double door shutters (front and rear ), cubical type locking arrangement and slanted roof with conforming IP 54 class protection .The panel boared shall comprise of following items, and all specified in SSR part I clause Noand directed by Engr in charge. INCOMING:- (i)MCCB AC 415 Volts, 100 Amp, 4- Pole, 16 KA rupturing capacity with fixed TM range confirming to IS13947-11 complete with connections to the bus bars 01 No. ii) Digital type Voltmeter, (100x100mm) square type,0-500 volt, flush mounting with selector switch - 01 set. iii) Aluminium busbar 400 Amp capacity cross sectional area of aluminium busbar should not be less than 50x6mm with heat shrinkable sleevs mounted on DMC post insulators,1100 Volts grade.- 04 Nos. iv) Digital type Ammeter,(100x100mm) square type,flush mounting compleate with suitable capacity of 03 Nos CTs and selector switch -01 set v) Phase indicator (RYB ) lamps LED type . -01 set. OUTGOING:- i) MCCB AC 415 Volts, 63 Amp, 4- Pole, 16 KA rupturing capacity with fixedthermal and magnetic settings confirming to IS13947-11 - 02 No. Note:- (i) Before fabrication of panel, drawing shall be submitted by the contractor for approval of the Accepting Officer. (ii) Necessary earth work, PCC foundation etc required is deemed to be included in the quoted rate. |
| 101 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced, connected to GI strip of size 32x6mm by means of bolts, nuts check nuts and washers of galvanized iron or steel,earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra payment from the department. |
| 102 | Supply and laying in repair GI pipe 50 mm bore (dia) light grade in trenches/road/surface/wall crossing for protection of cable with necessary fittings as required complete all as specified and as directed. |
| 103 | Material and labour for cuttingof road/ hard standingn exc 15cm widthandn exc 60cm in depth for laying ofcable protection pipe including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1to match with existing surfacecomplete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
