}

Dvdb Works In Nct Of Delhi. Restoration Of Phirni Road And Construction Of Outfall Rcc Drain Along The Road From T-Point Of Mukhmelpur-Hiranki Road To Rd 2600M Of Drain No.6 At Village Mukhmelpur In Burari Assembly Constituency., delhi-Delhi

Irrigation And Flood Control Department-IFCD has published Dvdb Works In Nct Of Delhi. Restoration Of Phirni Road And Construction Of Outfall Rcc Drain Along The Road From T-Point Of Mukhmelpur-Hiranki Road To Rd 2600M Of Drain No.6 At Village Mukhmelpur In Burari Assembly Constituency.. Submission Date for this Tender is 14-03-2024. Drainage Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

42809428
Dvdb Works In Nct Of Delhi. Restoration Of Phirni Road And Construction Of Outfall Rcc Drain Along The Road From T-Point Of Mukhmelpur-Hiranki Road To Rd 2600M Of Drain No.6 At Village Mukhmelpur In Burari Assembly Constituency.
Open Tender
Indian
Delhi
delhi
14-03-2024

Tender Details

Dvdb Works In Nct Of Delhi. Restoration Of Phirni Road And Construction Of Outfall Rcc Drain Along The Road From T-Point Of Mukhmelpur-Hiranki Road To Rd 2600M Of Drain No.6 At Village Mukhmelpur In Burari Assembly Constituency.

Key Value

Document Fees
Refer document
EMD
INR 352097.0 /-
Tender Value
INR 1.76 Crore /-

BOQ Items

Name of Work: Restoration of phirni road & construction of outfall RCC Drain along the road from T-Point of Mukhmelpur-Hiranki road to RD 2600m of Drain No.6 at Village Mukhmelpur in Burari Assembly Constituency.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
2Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.” Note : Excess/less cement used than specified in this item is payable/ recoverable separately.All works upto plinth level : M-10 grade plain cement concrete (cement content considered @ 220 kg/cum).
3Centering and shuttering including strutting, propping etc. and removal of form for all heights :
4Foundations, footings, bases of columns, etc. for mass concrete.
5Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
6Suspended floors, roofs, landings, balconies and access platform.
7Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durabilityas per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is pyable/recoverable separately) All works upto plinth level.Extra for providing richer mixes at all floor levels.Note:- Excess/less cement over the specified cement content used is payable /recoverable separately.Providing M-30 grade concrete instead of M-30 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum).
8Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more .
9Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
10Providing and laying in position bitumen hot sealing compound for expansion joints etc.Using grade "A" sealing compound.
11Providing and laying RMC of M-30 grade By using minimum 400kg of cement(43 grade, OPC) per cum of concrete in roads / streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/ retard setting of concrete to improve workability with out impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction / expansion, construction of cross / longitudinal joints of size 10mm wide 50mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer in-charge. (Cost of joint filler & sealants shall be paid for separately under relevant items).Note:- Cement content considered in M-30 is @ 400 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately M-30 RMC by using minimum cement @400 kg/cum. Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail