Lucknow Development Authority has published Tender For Construction Of Interlocking Paver Road And Drain Tender For Ward Number 48 Faizullaganj Pratham Esthith Nayantara Nagar Me Mt National School Se Ashish Dubey K House Tak Rmc Dwara Cc Road Interlocking And Nali Ka Nirman Karya. Submission Date for this Tender is 12-03-2024. Drainage Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineerin - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) (DSR 2023/15.2.2) |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth butexceeding 1.5 m in width as well as 10 sqm on plan including getting outand disposal of excavated earth upto 50 m and lift upto 1.5 m, as directedby Engineer-in- Charge: All kinds of soil. (DSR 2023/2.1.1) |
| 3 | Carriage of materials by mechanical transport including loading, unloading and stacking. Lime, moorum, building rubbish. 5.0 k.M |
| 4 | Construction of Subgrade with Material Obtained from Borrow Pits (For Cartod Earth Work) Construction of embankment with approved materíal obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 5.00 km as per Technical Specification Clause 301.5. SOR 2020-21 Item No-15 Chapter No-25 Mord 301.5(3.4) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived fromnatural sources: 8 graded stone adgregate 40 mm nominalsize derived from natural sources). (DSR 2023/4.1.8) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) (DSR 2023/6.1.1) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 2023/4.1.3) |
| 8 | 12 mm cement plaster of mix: 1:4 (1 cement: 4 Coarse sand). (DSR 2023/13.4.1) |
| 9 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (cement: 1.5 coarse sand (zone-III) derived fromnatural sources: 3 graded stone aggregate 20 mm nominalsize derived from natural sources)(DSR 2023/5.1.2) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild Steel and Medium Tensile steel bars. (DSR 2023/5.22.1) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm a nominal size derived from natural sources). (DSR 2023/4.1.2) |
| 12 | centering and shuttering including strutting, propping etc. and removal of form for Lintals, Beams plinth beams etc. (DSR 2023/5.9.5) |
| 13 | trimixingof CC Surface with hardner 3.50 kg/sqm including proper completion of work. |
| 14 | Construction of granular sub baseby providing close graded material, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density as perMORTH 401. |
| 15 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm a thick compacted bed of sand, compacting and proper embedding/ layingof inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattem, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (DSR 2023/16.91.2) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
