Miscellaneous Civil Works Of Iccc Building Of Fair Authority
Tender Value
99.84 Lakhs
Estimated cost
Bid Submission
13 Mar 2024
0 days left
EMD
6.99 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Miscellaneous Civil Works Of Iccc Building Of Fair Authority
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. (DSR-2023 2.6)*0.735 |
| 2 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. DSR -2023- 5.33.1In Foundation In Foundation |
| 3 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.As per DSR -2023,5.33.1 Above Plinth |
| 4 | CENTERING AND SHUTTERING INCLUDING STRUTTING, PROPPING ETC. AND REMOVAL OF FORM FOR: (DSR-2023- 5.9.6)*0.735 |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023- 5.22.6)*0.735 |
| 6 | Providing wood work in partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Sal Wood (DSR-2023-9.3.1)*0.735 |
| 7 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in wood doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. (DSR-2023-21.2.1)*0.735 |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR-2023- 9.1.1)*0.735 |
| 9 | Providing and fixing panelled or panelled and glazed 35mm shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (DSR-2023-9.5.1.1)*0.735 |
| 10 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. (DSR-2023-21.10)*0.735 |
| 11 | 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board false ceiling conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks). (DSR-2023-12.45.3)*0.735 |
| 12 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :(DSR-2023-11.33.1)*0.735 Second class teak wood |
| 13 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6coarse sand) :With F.P.S.(non modular) brick. (DSR-2023- 6.3.1)*0.735 |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR-2023-9.1.1)*0.735 |
| 15 | Providing and fixing panelled or panelled and glazed 35mm shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) (DSR-2023-9.5.1.1)*0.735 |
| 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.(DSR-2023- 9.48.2)*0.735 |
| 17 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm.(DSR-2023- 9.51.1)*0.735 |
| 18 | CEMENT PLASTER (IN COARSE SAND):12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) (DSR-2023- 13.4.2)*0.735 |
| 19 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size:Size of Tile 600 x 600 mm(DSR-2023- 11.41A.3.1)*0.735 |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : : Two or more coats on new work (Ist quality Royal, Silk, Asian/Berge) as per (DSR-2023- 13.41.1)*0.735 |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade : : Two or more coats on new work (Ist quality Royal, Silk, Asian/Berge) as per (DSR-2023- 13.46.1)*0.735 |
| 22 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.(DSR-2023- 13.26)*0.735 |
AI Tender Summary
Tender Timeline
Mar 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 13, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender