Tender For Repairs/Modernization Of Ies Change Room, Building No.21 And 74 Of F-1 Section In Filling Area At Ofk.
Tender Value
39.23 Lakhs
Estimated cost
Bid Submission
26 Mar 2024
0 days left
EMD
78469
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khamaria → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs/Modernization Of Ies Change Room, Building No.21 And 74 Of F-1 Section In Filling Area At Ofk.
BOQ
| Sl. No. | Item Description |
| 1 | Demolitionof reinforced cement concrete of any description ( reinforcement cut as required to facilitate demmolition ) |
| 2 | Dismantling boarding, any description, fixed in any position with nails |
| 3 | Dismantling timber scantlings 40 sq. cm and over in section, in anyposition in framed work |
| 4 | Excavating in trenches (soft/loose soil) n exc. 1.5m wide and n exc. 1.5m in depth for foundations etc or for pier holes nexc 10sqm on plan and nexc 1.5m in depth and getting out and removing excavated material to a distance of 50m and depositing where directed at a level n exc. 1.5m above the starting point. |
| 5 | M&L hardcore(broken stone) of gauge n exc 63mm,deposited,spread and levelled in layers n exc. 15cm thick,watered and rammed to a true surface. |
| 6 | M&L,shingle(stone bajri) filling in floors,back side of toe wall,laid in layers nexc. 15cm thick,spread,levelled,and blinded with earth and rammed including watering. |
| 7 | M&L,Cement concrete in foundations type C2 1:3:6 (40mm graded aggregate) |
| 8 | M&L,Providing pre cast cement concrete cover slabs of type B1(1:2:4,20mm graded aggregate,set in cement mortar 1:4) for man holes. |
| 9 | M&L,Reinforced cement concrete of type M-20,( 20mm graded aggregate)in floor foundations,footings,foundation beams,plinth beams,under reamed piles etc. |
| 10 | M& L modular Brick work with sub class \"B\"bricks,straight or curved on plan built in 1:6 cement mortar. |
| 11 | M&L,modular Brick work with sub class \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in1:4 cement mortar. |
| 12 | M&L,modular Brick work with sub class \"B\" bricks in one brick thick honey comb work,built in 1:6 cement mortar. |
| 13 | M&L,loose filling with aggregates of broken bricks gauge 80 to 150mm in soakage pits. |
| 14 | M&L,Form work to sides of concrete foundations,footings,bases of columns,sides and soffits of plinth beams etc. for rough finished surfaces. |
| 15 | S&F 2nd class hard wood(sal/sarai) plain,solid,straight chowkats and frames,wrought,framed rebated on the solid,rounded or chamfered,put together with glue pinned at joints. |
| 16 | M&L,2nd class HW rail and style plain framed factory made panelled shutters( two panel) of 40mm thick with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces .The size of rail and style as per IS: 1003 ( part-I),kiln seasoned and chemically pressure treated. |
| 17 | S&F butt hinges of size 125mm,medium weight,cold rolled mild steel conforming to ISI |
| 18 | S&F butt hinges of size 100 mm,medium weight,cold rolled mild steel conforming to ISI |
| 19 | S&F 300mm length aluminium anodised,barrel tower bolts of extruded section conforming to ISI |
| 20 | S&F 100mm length aluminium anodised,barrel tower bolts of extruded section conforming to ISI |
| 21 | S&F 300 mm length aluminium alloy,anodised sliding door bolt with hasp,staple (bolt type)and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 22 | S&F 150mm size aluminium handles,cast type,anodised. |
| 23 | S & F Aluminium handles, cast type,anodised |
| 24 | S&F MS flat (40mmx5mm) for hold fasts including nut bolts and washers fitted to wooden chowkats or frames. |
| 25 | S & F of 35 mm thick IInd class hard wood glazed and skeleton shutters, openrebated and prepared to receive glass,gauze, etc. (withoutsash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause8.24 (a); supplied and fitted to chowkat |
| 26 | Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stain less steel wire staples |
| 27 | S & F 3.00 mm thickSheet glass,ordinary quality and glazing with nails/oil putty in square n exc 0.5 sq. m in each pane |
| 28 | M&L,Mild steel TMTbars 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 29 | Ditto but 6mm to 8mm dia |
| 30 | M & L Granite ( of any type and size) tiles 20mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admistureof pigment to match the shed of granite stone including grinding , moulding and polishing complete. |
| 31 | M & L Granite ( of any type and size) tiles 20mm thick machine cut ,in skirting/ dado / vertical surface laid over the cement screedand jointed with grey cement slurry and pointed with white cement with admistureof pigment to match the shed of granite stone including grinding , moulding, cutting hole as requiredand polishing complete. |
| 32 | M&L,rendering 15mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth (without using extra cement) |
| 33 | M&L,Preparation of old wall surfaces of any description over 10 cm girth or width,not other-wise described and apply two coats of 1st Quality distemper oil emulsion after primer coat of alkali rasistence paint (colour and make as approved by EIC) |
| 34 | M&L,Preparation of old wall surfaces and applying two coats of Cement Paint after applying one coat of white cementpaint as specifed in clause no 15.12 & 15.15 of MES SRR part-I and as directed by Engg.-In-Charge(Make & Colour as approved by EIC) |
| 35 | M&L,Preparation of new wood and wooden based surfaces of any description over 10 cm girth or width, not otherwise described and apply two coats of 1st Qualitypaint over a priming coat of pink primer as specifed Colour and make as approved by EIC |
| 36 | S & F of sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugwashers and waste including bedding in cement motar to draf wall or including fixing cantilever btrackets and connecting unoin , coupling and PVC waste pipe of desire length over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 37 | M&L, 15 mm high density polythene pipes ( HDPE) of pressure rating 6kgf/ sqcm fixed complete including bend and jointsto wall ceiling ar floors etc. |
| 38 | M&L, 20mm high density polythene pipes ( HDPE) of pressure rating 6kgf/ sqcm fixed complete including bend and jointsto wall ceiling or in floors etc. |
| 39 | S&F,500 litres rotational moulded polythylene water storage tanks(Cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR Part -I |
| 40 | S&F Bib taps 15mm bore, cast copper alloy with cromimum platedincluding necessary cromium plated extension nipple etc. as approved by E-I-C |
| 41 | S&F,15mm dia,ball brass valves,high pressure,with polythylene float and fly nut complete,screwed for iron pipe or brass ferrule. |
| 42 | S&F,110 mm PVC ( SWR) pipes double soketed in any length with rubber ring joint laid in trenches. |
| 43 | S & F of 110mm PVC ( SWR) bent of any radius |
| 44 | S&F vitreous china Urinal, Half stall type, white complete set including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixingflushing cistern with brackets flush pipes grating and union wirh PVC spreader any colour for 15mm size ( minimumwt. 60gm)etc. for discharge pipe.fixed in repair work |
| 45 | S & F of vitreous china wash basin flat back side 630X450 mm including braket and waste fitting , 40 mm brass, cromium plated with long screwd shanks and fly nut s, flange end with PVCwaste pipe of desire length etc. complete fixed in repair. |
| 46 | S & F PVC connection 15 mm size with PTMT nuts of length 450mm |
| 47 | S&F,water closet viteous china squatting pan(Orissa patteren)size 630X450mm white,with integral foot rests,complete including provision of lime concrete , fixed in repair work. |
| 48 | S&F,10litres PVC valveless,syphonic action type,flushing cistern,low level,white,with inlet,ball valve,float and handle including brackets.Colour and make as approved by EIC. |
| 49 | S&F Stop valves 15mm bore, cast copper alloy, screwed down, high pressure,with crutch or butter fly handle, screwed both ends for iron pipe or for unions. |
| 50 | S & F of Mild steel frame work such as grills , gratings etc. with ends of bars shoulders framed guard bars , over frame work ofopen drains water tanks and similar work confirming to Fe-290 Gr-E-165 |
| 51 | M&L, non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exceeding 0.16sqm but not exc.0.38sqm,in floors etc.set and jointed in neat cement slurry and pointed in coloured cement to match.Colour and make as approved by EIC. |
| 52 | M&L, non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exceeding 0.06sqm but nexc.0.11sqm,in floors etc.set and jointed in neat cement slurry and pointed in coloured cement to match.Colour and make as approved by EIC. |
| 53 | M&L,Glazed ceramic coloured tiles in vertical surfaces of size 300X200X7mm thick set and jointed in neat cement slurry and pointed in coloured cemnet to match. |
| 54 | Dismantling of floor tiles , wall tiles etc. including cement mortoe bedding , removing serviceable tile to store and rubbish off the premoses. |
| 55 | M&L,screed bed or bedding layer of mortar 15mm thick and 1:4, for laying floor finishes. |
| 56 | S & F of Anodised aluminium snap grid frame work for false ceiling all as specified ( Grid size 605X 605mm) |
| 57 | M & L 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frameworkwith screws |
| 58 | M & L Kota stone slab 20-25mm thick in skirting , steps , dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing , mounding and polishing complete |
| 59 | Taking down chowkhats or frames not exc. 1.5 sq. msqm each with shutters (without taking off shutters from the frames) and removing to store |
| 60 | Taking down chowkhats or framesexc. 1.5 sq.m and n. exc. 4.0 sqm each with shutters (without taking off shutters from the frames) and removing to store |
| 61 | S & F of Steel rolling shutters 1.25 mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp andstaple and one shop coat of primer erected in position as indicated,complete but gear operated type with bevel gear box and crank handle. |
| 62 | S&F, PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification of MES SSR part -I, 2009 |
| 63 | Removing building materials etc. to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination |
| 64 | S&F Factory made solid PVC door shutter 30mm thick (styles), consisting of frame made out of M.S tubes for top & botom rails.MS frame shall be covered with heat moulded plain colour PVC \"C \" chanel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in MS frame welded ? sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing . |
| 65 | Point wiring (One light/fan point controlled by one switch) will be done with 1.50 sq. mm flame retardant low smoke (FRLS), PVC insulated sheathed stranded copper conductor wire drawn in and including in surface rigid steel stove enamelled (ERW) conduit of suitable dia with IS 9537 (part III) 1983 marking medium grade including accessoriessurface in wall including PVC insulated, sheathed earth wire with copper conductor of size 1.50 Sq. mm, pressed steel terminal boxes sunk on wall for mounting of switches, sockets fans regulator etc. including laminated sheet cover 3mm thick complete all as specified and directed.Make of Wire- Anchor/Havell’s/Bonton/Finolex/polycab/C&S/Standard or equivalent. |
| 66 | ------Ditto-----but One 3 pin socket outlet 5A point independent circuit. |
| 67 | ------Ditto-----but One 3 pin socket outlet 5A point on same board. |
| 68 | --------Ditto------ as per No.1 above but with 2.5 Sq.mm, (FRLS) PVC insulated copper condutor cable ( for socket outlet 15 amp. Independent circuit) |
| 69 | S&F switch piano, flush type 5A SP one way ISI Marked. Make: Anchor/SSK/Havell\"s/Polycab/C&S/Standardor equivalent. |
| 70 | S & Fsocket outlet flush type 2 in 1, 3Pin 5A ISI Marked. Make:Anchor/SSK/Havell\"s/Polycab/C&S/Standard or equivalent |
| 71 | S & F Switch socket combination outlet 3 pin, 5 & 15Amp, flush type Universal. Make: Anchor/SSK/Havell\"s/Polycab/C&S/Standardor equivalent. |
| 72 | Ceiling rose,3 terminal/PVC/polycarbonate, isolated bodywith M&L. Make: Anchor/SSK/Havell\"s/Polycab/C&S/Standard or equivalent. |
| 73 | Cutting opening through brick walls built in cement mortar for 18 inch sweep exhaust fan and making good dismantled portion in cement mortar 1:3, including fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc.to store and rubbish not exc. 50m. complete all as specified and directed. |
| 74 | Cutting holes in brick walls (not exceeding half brick) built in cement mortar including fixing holefasts and making good in cement mortar 1:3 for exhaust fan with M&L, complete all as especified and directed. |
| 75 | Taking down carefullyCu/ Al light point wiring ( light, fan socket or power complete includingfixture & fitting such as switches ceiling roses, pendent regulators,sockets, light fittings etc removing materials to store for keeping in safe custody and making good disturbed surface of wall, floors etc. |
| 76 | S & F of Triple pole and neutralDB4 way IP 42 protection, metal double door, universal mounting with 200 Amps rated Bus bar, neutral bar, Earth bar and cable ties for cable management, top & bottom removable gland plates with blanking plates & all connections with copper lugs ISI Marked . DBshall consist of the following :(a) Incommer MCBs TPN/FP 16 to 32 Amps, 415V AC,\"B\" curve 10 KAISI marked confermed to IS 8828 /IEC 60898 Qty - 1 Nos.(b) Out goingMCB SP5 to 32 Amps 240 volt AC,\"B\" curve,10KA ISI marked confermed to IS8828 /IEC 60898 Qty - 12 Nos.Make: Legrand/Polycab/SSK/Havell\"s/Anchor/Standard or equivalent. |
| 77 | Excavation in trenches not exceeding 0.5m wide and 0.75m depth and getting it out in soft/loose soil for laying of U/G cable. |
| 78 | Sand cushioning in cable trench 10 cm thick including material and labour. |
| 79 | S & L reinforcedprecast concrete cable cover class LV Type 2 flate size 300mmx180mmx40mm with M & L |
| 80 | Returning filling in including spreading, watering and well ramming in layers not exceeding 25cm. |
| 81 | Demolition & dismantling of cement concrete in ground floor and pavings not exceeding 15 cm thickness below or above ground level. |
| 82 | Cement concrete Type B21:2:4 40mm graded corse aggregate for cover the under ground cable after laying it with material and labour. |
| 83 | S & L Tube medium grade galvanised 50 mm dia IS markedwith all fittings laid in trenches for protection u/g cables Make : TATA/Jindal/Zenith/Swastic or equivalent. |
| 84 | Supply & fixingcross arm of MS channel bracings,supports,clamps and back plates fabricated from structural steel section including nuts & bolts, washers,welding,bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed & inclusive of one primer coat, one under coat & one finishing coat of paint with material & labour. |
| 85 | S & Lof 4 core XLPE insulated and armoured heavy duty cable with stranded Al conductor, 1100 voltage grade, size 16 sq mm including termination both the ends with proper lugs, glands. Make : Gloster/CCI/Havells/Finolex/poly-cab/Zenium or equivalent.. |
| 86 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).Make: Alomberg, Brand Gorilla or equivalent of Maya/ Simartek. |
| 87 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty with blades, and frame and louvers Make : Crompton/Havells/Alstom/GEC/Almonard/Bajaj /Khaitan or equivalent. |
| 88 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Crompton/Philips/C&S/Havells/Bajaj/Osram or equivalent. |
| 89 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make: Polycab/C&S/Phillips/Havells/Anchor or equivalent. |
| 90 | Earthing complete with GI plate electrode 600x600x6.0mm thick burried directly in ground (earth plate not less than 2.25m below ground level) including excavation of soil, with top edge of the plate not less than 1.5m below normal ground level and duly filled with alternate layer of char coal & salt from 150mm below the plate to 150mm above the plate (total 900mm thick) connected to GI earth strip size 25x4mm in GI protection pipe of size 40mm dia upto 7.5m long by means of nuts, bolts, washers, check nuts of GI steel, fitted with funnel complete all as per procedure and as shown in SSR electrical plate No. 3. Connected to earth test point/earth bus (to be provided near incoming mains) all as specified and testing including RCCearth pit chamber duly cement plaster finished and RCC pit cover 1mX1mX150mm, PCC hard standing surrounding the earth pit chamber, location of the earth pit marked on the nearest wall to be written with paint (for distance & value of earth pit) with material and labour. Earth pit chamber will be made 0.5m above the ground level. |
| 91 | Supply & Fix switch with sheet steel inclosure 415/500V, 3 phase with HRC fuses complete with Neutral link of capacity 32 Amps.Make: English Electric/ SSK /C&S/Standard /HPL or equivalent. |
| 92 | Old/Dismantled point wiring with accessories(CREDIT ITEM). |
AI Tender Summary
Tender Timeline
Mar 08, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 26, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender