}

Tender For Construction Of Pullipadam Anganawadi, Malappuram-Kerala

Grama Panchayat has published Tender For Construction Of Pullipadam Anganawadi. Submission Date for this Tender is 15-03-2024. Construction Material Tenders in Malappuram Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

42788403
Tender For Construction Of Pullipadam Anganawadi
Open Tender
Indian
Kerala
Malappuram
15-03-2024

Tender Details

Construction Of Pullipadam Anganawadi , Quarry Waste , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Coarse Sand (Zone Iii) , Portland Cement , Stone For Masonry Work , Royalty For Good Earth , Twisted Steel/Deformed Bars , Stone Aggregate(Single Size): 10 Mm Nominal Size , Wall Form Panel 1250X500 Mm , Corner Angle 45X45x5 Mm 1.50 M Long , 100 Mm Channel Shoulder 2.5 M Long , Double Clip (Bridge Clip) , Single Clip , M.S. Tube 40 Mm Dia , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Red Oxide Zinc Chromate Primer , Adjustable Telescopic Prop 3 M (2.02-3.75M) , Beam Clamp 300-380 Mm (450-1070 Mm) , Laterite Stone Of Size 35X20x20cm , Solid Blocks Of Size 30X20x20cm , Hollow Bloks Oof Size 40X20x10cm , Second Class Kail Wood In Planks , Second Class Kail Wood In Scantling , Safeda Ballies 125 Mm Diameter , Hollock Ballies 125 Mm Diameter , Adjustable Span Eso+Si (2.35-3.40) , Fine Sand (Zone Iv) , Vitrified Floor Tile 60X60 Cm , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Plasticizer / Super Plasticizer , Production Cost Of Concrete By Batch Mix Plant , Pumping Charges Of Concrete Including Hire Charges Of Pump, Piping Work & Accessories Etc. , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x1.70 Mm , Wall Form Panel 1250X450xmm , Corner Angle 45X45x5 Mm 2.50 Long , Column Clamp 450X1070 Mm , Prop 2 M (2-3.5M) , Multi Surface Paint , Special Primer (C.W) , Aluminium T Or L Sections , Chromium Plated Brass Screws 20 Mm , Powder Coating 50 Microns On Aluminium Sections , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Neoprene / Epdm Rubber Gasket , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , Powder Coated

Key Value

Document Fees
INR 590 /-
EMD
INR 40703.0 /-
Tender Value
INR 16.28 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail