Bharat Sanchar Nigam Limited-BSNL has published Tender For Urgent Petty Works To Toilet At Csc Building Mavelikkara.. Submission Date for this Tender is 14-03-2024. Toilet Bathroom Tenders in mavelikkara Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 12 mm cement plaster of mix : |
| 2 | 1:6 (1 cement: 6 fine sand) |
| 3 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 4 | 1:6 (1 cement: 6 fine sand) |
| 5 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 6 | For door/ window/ clerestory window |
| 7 | Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. |
| 8 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 9 | W.C. pan with ISI marked black solid plastic seat and lid |
| 10 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 11 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 13 | Flexible pipe 32 mm dia |
| 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 15 | 150x10 mm |
| 16 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 17 | 100 mm |
| 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 19 | 250x16 mm |
| 20 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 22 | Hot finished welded type tubes |
| 23 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 24 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 26 | Ordinary cement without any pigment |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 28 | 75 mm diameter |
| 29 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 30 | 75 mm Bend 87.5° |
| 31 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVCpipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 32 | 75 mm |
| 33 | Dismantling of flushing cistern of all types/ urinals (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 34 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 35 | Flexible pipe 32 mm dia |
| 36 | Providing and fixing PTMTtowel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 37 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. |
| 39 | External work 25 mm nominal outer dia Pipes |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 41 | 25 mm nominal outer dia Pipes |
| 42 | Providing and fixing brass bib cock of approved quality : |
| 43 | 15 mm nominal bore |
| 44 | Providing and fixing PVC floor trap of approved quality of self cleansingdesign of 150x150mm size and locking with PVC half round stainer with provision of 1 to 3 waste inlets and out lets of range 75mm to 40mm dia for different appliances all complete including cost of cutting and making good the walls and floors etc. |
| 45 | Cleaning and removing long standing stains of ceramic glazed wall tiles and floor tiles using suitable cleaning agents and mild acids etc. complete as per the direction of Engineer in charge |
| 46 | Providing andfixing 9mmthick PVC profile sheetceiling / partitions /wall panellingetc of approved quality and manufacturers including all labour charges ,edge beading etc complete .(Cost of Frame /stiffner membersshall be paid Seperately). |
| 47 | Disposal of any type of debris andearth mixed with debris and decayed materials (approximately 2 Cum) including loading, transportation and disposal at permissible places well away for more than 5 Km from the site and neatly levelling and cleaning the site complete |
| 48 | Providing and fixing stainless steel grating of nearest size 100mm |
| 49 | Providing and fixing PVC half turn valve for PVC pipe with necessary PVC clamp on both ends, complete. |
| 50 | 40 mm dia |
| 51 | Repairing the damaged flushing cistern including replacing siphon washer, handle etc. if required complete as directed by the Engineer in charge. |
| 52 | Cutting and removing the branches of treeswhere ever obstructing the compound wall and buildings including cutting and bringing down carefully, cutting in to pieces and felling down without falling on the adjacent buildings and stacking the log in the compoundincluding disposal of unserviceablematerial like leaves etc. to a distance ofnot less than 5 km. |
| 53 | Providing and fixing stainless steelhealth faucet including all the fittings all complete. The cost isincluding of cutting and making good the walls and floors etc complete. |
| 54 | Solid block masonry with hydraulically pressedcement concrete solid blocks of 1:3:6 mix(1 cement: 3 Msand : 6 graded stone aggregate 6 to 12 mm )of minimum compressive strength of 50kg/Sqcmmanufactered in factories , hydraulic pressedfor foundation and super structure ( 15cm thick )with : |
| 55 | Cement mortar 1:6(1 cement: 6 Coarse sand) |
| 56 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. |
| 57 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters |
| 58 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 59 | New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 60 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 62 | One or more coats on old work |
| 63 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 64 | 10 litre (full flush) capacity-white |
| 65 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 66 | Of area 3 sq. metres and below |
| 67 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 69 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 70 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 71 | Checking and attending minor repair work of plumbing, floors around W/C , wash basin . Sink etc., as directed by the engineer in charge (a) Plumber |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
