Tata Memorial Center-TMC has published Tender For Up-Gradation / Modernization Of Electrical Panels And Substation Phase Ii, Annex Building. Submission Date for this Tender is 30-03-2024. Electrical Panel Tenders in parel Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Bustrunking System Supply, Installation, Testing & Commissioning ofSandwich type Rising Mains (Aluminium Bustrunking) use on 3 phase 4 wire with 100% Neutral 630 A 36kA SC for 1 sec. 415 volts, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, enclosure made of min. 1.5 mm thick galvanised steel sheet treated according to UNI EN 10327 and painted with RAL7032/35 or OEM standard resins with high resistance to chemical agents complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, Class F insulation, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required confirming to IS 8623 and IEC 61439-6 or latest standard of same code. |
| 2 | Straight Run Feeder Bustrunking IP 54 630A *Quantity is for four numbers riser installation at four different floor location in Annexe Building (Reference drawing attached). |
| 3 | End Cover |
| 4 | Plug In Box of 125A with all switchgears including 4P 100A, 25KA MCCB & its accessories complete. |
| 5 | Plug In Box of 200A with all switchgears including 4P 200A, 25KA MCCB & its accessories complete. |
| 6 | Plug In Box of 400A with all switchgears including 4P 400A, 25KA MCCB & its accessories complete. |
| 7 | Supply, Installation, Testing and Commissioning of 630A End feed Panel with all protection & measuring switchgear including 36kA 630Amp 4P Thermal Magnetic MCCB, Multifunction meter, CT"s, Control MCB"s, RYB Indicating LED Lamps, Extended Rotary Handle with all necessory supports including flexi busbar require to connect 630A Flange End of Aluminium Bustrunkuing in complete manner. |
| 8 | Supplying, erecting, testing and commissioning of 1100 V AC PVC FRLS armoured 3 1/2 core 95 sq mm Aluminium Conductor cable of Polycab/RRK/Finolex make erected on wall/beam/ceiling/shaft etc with appropriate size, along with saddlers,spacers complete with approved manner |
| 9 | Supplying, erecting, testing and commissioning of 1100 V AC PVC FRLS armoured 3 1/2 core 185 sq mm Aluminium Conductor cable of Polycab/RRK/Finolex make erected on wall/beam/ceiling/shaft etc with appropriate size, along with saddlers,spacers complete with approved manner |
| 10 | Cable Gland for 3 1/2 core 95 sq mm - Double Compressionwith Termination includes Supplying and erecting heavyduty flange type brass cable gland for 3 1/2 core 185 sq mm armoured cable with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs.Make Comet/Braco/Dowells. |
| 11 | Cable Gland for 3 1/2 core 185 sq mm - Double Compressionwith Termination includes Supplying and erecting heavyduty flange type brass cable gland for 3 1/2 core 185 sq mm armoured cable with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs.Make Comet/Braco/Dowells. |
| 12 | Dismentaling & Removing of existing bustrunking having max length of 15mtr approx includes Removing of Flange End, Removing of Tapoff boxes, Removing of End Feed Unit & Removing of gland, cables 3.5/4C Cu/Al upto 120sq mm & all its accessories and supports complete as instructed by Engineer-in-charge. |
| 13 | Dismentaling & Removing of existing bustrunking having max length of 30mtr approx includes Removing of Flange End, Removing of Tapoff boxes, Removing of End Feed Unit & Removing of gland, cables 3.5/4C Cu/Al upto 120sq mm & all its accessories and supports complete as instructed by Engineer-in-charge. |
| 14 | Dismentaling & Removing of existing bustrunking having max length of 60mtr approx includes Removing of Flange End, Removing of Tapoff boxes, Removing of End Feed Unit & Removing of gland, cables 3.5/4C Cu/Al upto 120sq mm & all its accessories and supports complete as instructed by Engineer-in-charge. |
| 15 | Necessory filling as per site condition & At each floor crossing fire barrier of 2 hours rating duly tested as per UL1479 /ISO 834 shall be provided. Considering 600mmX300mmX200mm approx for each floor. |
| 16 | Cat (B) - Buy Back Items |
| 17 | Buy-Back (ie minus)Amount of Old Bustrunking having total length of 15mtr approx which includes Aluminium conductor, MS housing of Busduct system, fuse type tap off box & its SFU of 400A rating as end feed panel and all its accessories and supports complete as shown by Engineer-in-charge. |
| 18 | Buy-Back (ie minus) Amount of Old Bustrunking having total length of 30mtr approx which includes Aluminium conductor, MS housing of Busduct system, fuse type tap off box & its SFU of 400A rating as end feed panel and all its accessories and supports complete as shown by Engineer-in-charge. |
| 19 | Buy-Back (ie minus) Amount of BuyBack of Old Bustrunking having total length of 60mtr approx which includes Aluminium conductor, MS housing of Busduct system, fuse type tap off box & its SFU of 400A rating as end feed panel and all its accessories and supports complete as shown by Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
