Housing Urban and Rular Development Government Departments Closing in 0 days TDR #42783637

Tender For Construction Of Sr. Secondary Additional Class Room At Ghss Gund

Issued by Government Departments · kangan, Jammu And Kashmir
Tender Value
18 Lakhs
Estimated cost
Bid Submission
16 Mar 2024
0 days left
EMD
36000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kangan → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Construction Of Sr. Secondary Additional Class Room At Ghss Gund

BOQ

Name of Work: Constructionof SR. secondaryACR at GHSS Gund
Sl. No. Item Description
1Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil /boulders
2Providing and laying Stone solling/GSB Nallah makh/Quarry makh or 2nd class sandin Foundation treches / inside plinth including compacting, watering including all carriages of material complete.
3Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Crushed.incl all carriages
4Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)incl all carriages
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed. .incl all carriages
6Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, Coloumns, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).incl all carriages
7Steel reinforcement for R.C.C. work ready to use \"cut and bend\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-500D or more.incl all carriages.
8Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
9Centering and shuttering including strutting, propping etc. and removal of form work for:
10foundation
11superstructure
12Providing and fixing of wood work in frames ofdoor/ window /arch windows /ventilator wrought frames (chowkats)imported KD Wood incl cost of hold fasts
13Providing and applying 15mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) Incl curring complete.
14Finishing walls with Exterior waterproof cement paint of approved quality and make including priming coat.
15, Providing and fixing 35mm thickImported KD panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws including cost of 12mm thick Pre-laminated particle board both sides laminated for door shutters.
16Providing and laying Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. incl all carriage
17Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture onwork.
18Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades.
19Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
20Distemperingwithoilboundwashable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer
21Structural steel work welded in built up sections and frame work including cutting, hoisting fixing in position all complete in angles / flats / tubes etc. including fixing of18guageMS sheets in sofffits and eveas boarding including ms frame work.incl cost of steel primer complete job.Incl carriage by MT
22Providing and fixing with High rib profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters 0.50mm thick Incl carriage by mt
23Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm
24Providing hardware items
25Link Locks
26Towerbolts 100 mm
27Handles 150 mm
28Handles 100 mm
29Lighting point (one lighting point includes wiring of lighting point in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulated multistrand copper wire,6 amp one way swittch6 amp S pole MCB,10 amp DP MCB,2 way DB MCB and hylem sheetwith 16/15 Watt LED surface lights.including cost of channelsas per requirement.One point controlled by one 6 amp switch.( upto 10 meters)including Placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC Work
30Heating point (one heatting point includes wiring of lighting point in 2.5 sq.mm PVC insulated copper wire and 4.00 sq.mm PVC insulated multistrand copper wire,16 amp one way swittch,10 amp S pole MCB,2 way DB MCB and hylem sheet.includingPlacing and fixing in position deep junction of cast iron with network Conduit pipes with necessaryfittings in RCC Work.
31Providing and fixingone fan point includes wiring for lighting points in 1.5sqmm pvc insulated copper wire and 2.5sqmm pvc in multi -strant copper wire 1200mm ceilling fan electronic fan dimmer.6Amp s pole MCB-10AMP DP MCB2 Way DB for housing MCBor lightting circuits and hylem sheet.includingPlacing and fixing in position Fan clamp boxes with MS Fan clamps connected with network Conduit pipes with necessaryfittings in RCC Work
32Ornamantal Grill work welded in built up sections/framed work, including cutting, hoisting, fixing in position using structural steel etc. as required.in guard bars railing etc.
33Providing and fixing of heavy duty glass panes 3.5mm thick instead of ordinary glass panes 13.75k/sqm in door window and clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured)

AI Tender Summary

OUR REF NO 42783637
AUTHORITY Government Departments
TENDER VALUE 18 Lakhs
LAST DATE 16-03-2024
Authority
Authority Name Public Works Department
Work Description Tender For Construction Of Sr. Secondary Additional Class Room At Ghss Gund
Basic Detail
Tender No NIT 52
Bidding Type Tender
Location
City kangan
State Jammu And Kashmir
Key Dates
Publish Date 08 Mar 2024
Submission Date 16 Mar 2024
Open Date 16 Mar 2024
Finance
Tender Value 18 Lakhs
Tender Fee 800
EMD 36000
Exemption Not Available
Document List
41d2e489-378c-4ad6-99e9-01e967d447ed.html
BOQ_720697.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Mar 08, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 16, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 16, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

41d2e489-378c-4ad6-99e9-01e967d447ed.html

xls

BOQ_720697.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders