|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 7 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all level. |
| 9 | Thermo-Mechanically Treated bars |
| 10 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 13 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 15 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 16 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). |
| 17 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, window jambs,header, horizontal,verticaland similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red |
| 18 | Granite stone slab of colour black, Cherry/Ruby red |
| 19 | Area of slab upto 0.50 sqm |
| 20 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchenplatform, vanity counter and similar location in marble/ Granite/ stone work, including necessaryholes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 21 | Providing and fixing rubbed stone slab table, edges rounded and polished, 75 cm high 50 cm deep and 18mm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. |
| 22 | Granite Stone of approved shade |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles of size 300mm x 600mm or more conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 25 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 26 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :100X58X1.90 mm |
| 27 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. including dismantling of old Haps and staple /Sliding door bolt if required complete : |
| 28 | 300x16 mm |
| 29 | 250x16 mm |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 31 | 300x10 mm |
| 32 | 200x10 mm |
| 33 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 34 | 125 mm |
| 35 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 36 | Providing and fixing to existing door frames. |
| 37 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 38 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 39 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 40 | Size of Tile 600 x 600 mm |
| 41 | Providing and laying Polished Granite stone flooring/Door sillin required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 42 | Polished Granite stone slab colour of JetBlack, Cherry/Ruby Red or equivalent |
| 43 | Providing and fixing on unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC sewer pipes conforming to IS : 13592 Type B,including jointing with adhesive. |
| 44 | Coupler a) 110 mm |
| 45 | Single tee with door a) 110x110x110 mm |
| 46 | Single tee without door a) 110x110x110 mm |
| 47 | Bend 87.5° a) 110 mm bend |
| 48 | 12 mm cement plaster of mix :( Including height up to 10 meters) |
| 49 | 1:6 (1 cement: 6 coarse sand) |
| 50 | 15 mm cement plaster on the rough side of single or half brick wall of mix :( Including height up to 10 meters) |
| 51 | 1:6 (1 cement: 6 coarse sand) |
| 52 | Finishing walls with premium Acrylic Smooth exterior paint with silicon additive of required shade : (Including height up to 10 meters) |
| 53 | New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 54 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (Including height up to 10 meters) |
| 55 | Two or more coats on new work |
| 56 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.( Including height up to 10 meters) |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :( Including height up to 10 meters) |
| 58 | One or more coats on old work |
| 59 | Finishing walls with Primium Acrylic Smooth exterior paint with silicon additives of required shade :( Including height up to 10 meters) |
| 60 | Old work (One or more coat applied @ 0.83 ltr/10 sqm). |
| 61 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 62 | Orissa pattern W.C Pan of size 580x440 mm |
| 63 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge |
| 64 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge. (a) Internal Work- Exposed on wall |
| 65 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 66 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 67 | Taking out/Dismantling doors, windows and clerestory window shutters (steel or wood) with or without chowkhats includingstacking within 50 metres lead : |
| 68 | Of area 3 sq. metres and below |
| 69 | Dismantling tile work in floors and roofslaid in cement mortar or top cement mortar layer of Coba treatment including stacking material within 50 metres lead. |
| 70 | For thickness of tiles 10 mm to 25 mm |
| 71 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 72 | Dismantling old plaster or skirting/ wall tile raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 73 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors, dismantling of old european type W.C. pan wherever required : |
| 74 | W.C. pan with ISI marked white solid plastic seat and lid |
| 75 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 76 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 77 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 78 | 10 litre capacity - White |
| 79 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 80 | Semi rigid pipe |
| 81 | 32 mm dia |
| 82 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 83 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 84 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore |
| 85 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 86 | 20 mm dia nominal bore |
| 87 | 25 mm dia nominal bore |
| 88 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 89 | 25 to 40 mm nominal bore |
| 90 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 91 | 25 mm nominal bore |
| 92 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 93 | 45 cm length |
| 94 | 15 mm nominal bore |
| 95 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 96 | 150 mm diameter |
| 97 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 98 | 20 mm diameter pipe |
| 99 | 25 mm diameter pipe |
| 100 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 101 | 20 mm nominal bore |
| 102 | 25 mm nominal bore |
| 103 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 104 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 105 | 15 mm nominal bore |
| 106 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. a) 15 mm nominal bore |
| 107 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
| 108 | 15mm nominal bore |
| 109 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 110 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 111 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 112 | Providing and fixing GI/PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms |
| 113 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 114 | 100x100 mm size P type |
| 115 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 116 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
| 117 | For fixed portion |
| 118 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 119 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 120 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 121 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 122 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 123 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 124 | Providing and applying white cement based putty of average thickness 0.5 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 125 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with filling joint with cement mortar (1 cement :4 coarse sand)all complete as per direction of Engineer-in-Charge. |
| 126 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanicalincluding stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: |
| 127 | Up to 150 mm diameter |
| 128 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm withspreaders( C.P. brass) with waste fitting as per IS : 2556,with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the wallS floors wherever required : |
| 129 | Single half stall urinal |
| 130 | Providing and fixing CP grating of approved quality Circular type, 110 mm dia, with or without25 mm waste hole |
| 131 | Providing and fixing Table top wash basin [Cera Calburt or equivalent ] of size 550 mm x 400 mm Snow White Table Top Basin with 15 mm C.P. brass pillar taps[ equivalant to cat no 9302 (Prayag make) ,Cera F1015101 Steel Pillar Cock, Silver, Steel Finish or equivalent], 32 mm C.P. brass waste of as per approved make of selection including fittings and waste pipe etc. and fixing on wash basin counter by tile adhesive of approved make. |
| 132 | Providing and laying unplasticised Rigid PVC sewer pipe wih min. pressure 6 kg/sqcm conforming to IS : 13592 ,Type B including jointing with adhesive (i) plain socketed pipes.( Including all heights up to 10 meter) |
| 133 | 110 mm diameter |
| 134 | Providing and fixing on unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC sewer pipes conforming to IS : 13592 Type B,including jointing with adhesive. |
| 135 | 110 mm P Trap |
| 136 | Providing and fixing 1500 mm X 750 mmmirror with plastic moulded frame havingglass thickness not less then 5mm thick of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 137 | Providing and fixing C.P Brass health faucet as per approved design and make and all fitting etc complete, including cost of cutting and making good the walls and floors as per direction of Engineering in charge. |
| 138 | Providing and fixing C.P. brass Pressmatic valve hindware or equivalent approved quality conforming to IS standards |
| 139 | 15mm nominal bore |
| 140 | Excavating/Demolishing of malba/foam concrete/Lean mix and refillingin sunken portion of toilet as per direction of Engineering-In-Charge |
| 141 | Providing and fixing 600 mm long CP brass towel rail completefixed to wooden cleats withscrews of approved quality as per direction of Engineer in charge. |
| 142 | Providing and fixing GI pipe clamp for PVC rain pipes of diameter : a) 110 mm |
| 143 | Providing and fixingSS cloth hanger with 06 hookcompletefixed withscrews of approved quality as per direction of Engineer in charge. |
| 144 | Credit for dismantled material received from site of work which will be handed over to contractor as per direction of Engineer-in-charge.Dismantled old Wood |
| 145 | Credit for dismantled material received from site of work which will be handed over to contractor as per direction of Engineer-in-charge.Dismantled old steel |
| 146 | Credit for dismantled material received from site of work which will be handed over to contractor as per direction of Engineer-in-charge.Dismantled old PVC |
| 147 | Electricals |
| 148 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 149 | Group B |
| 150 | Group C |
| 151 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 152 | Group C |
| 153 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 154 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 155 | Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 156 | 3 x 4 Sq.mm |
| 157 | 6 x 4 Sq.mm |
| 158 | Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 159 | Supply & Fixing suitable size GI Box with modular plate and cover in front on surface or in reccess including provising and fixing 6 pin 5/6 and 15/16 amps moduler socket outlet and 15/16 amps moduler switch connection ect. as required. |
| 160 | Supplying and fixing following sizesDLP U-PVCtrunkingwith cover, andaccessories (Joints, Angles, Bends, End Caps, Brackets, Junctions etc) on surface etc complete as required. |
| 161 | 32 X 12.5 mm |
| 162 | Supplying and fixing of following sizes of flexible steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 163 | 20 mm |
| 164 | 25 mm |
| 165 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 166 | 20 mm |
| 167 | 25 mm |
| 168 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. |
| 169 | 1 or 2 Module (75mmX75mm) |
| 170 | 3 Module (100mmX75mm) |
| 171 | 4 Module (125mmX75mm) |
| 172 | 6 Module (200mmX75mm) |
| 173 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 174 | 3 pin 5/6 amps socket outlet |
| 175 | 15/16 amp switch (Geyser Control) |
| 176 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required.( For AC) |
| 177 | Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1200 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature5500K - 6500 K, Average life L70B50: 50000 hours, THD = 10%, suitable for operation on 140-270V, 1F, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required. |
| 178 | Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen andwith a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature5500K - 6500 K, Average life L70B50: 50000 hours, suitable for operation on 140-270V, 1F, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required. |
| 179 | Supply, installation, testing and commissioning of surface mountedLED downlighter luminaire inmetallic housing, with a minimum system lumen output of 1500 lumen andwith a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1F, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required. |
| 180 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 181 | Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fanin the existing opening,including making the hole to suit the size of the above fan and making good the damage, connection, testing, commissioning etc. as required.(HavellsVentil Airor with similar specifications C&G / Orient / Usha / Almonard) |
| 182 | Supplying and installation of PVC Exhaust fanwith louver shutter of following sweep size in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Make-Havells / C&G / Orient / Usha / Almonard/ Atomberg) |
| 183 | 200 mm sweep |
| 184 | 250 mm sweep |
| 185 | Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 380 mm on wall /window for etc as required including the cost of making hole, nuts and bolts,etc. as required. |
| 186 | Making holes of the required size and shape in a brick masonry wall for installation of the following size exhaust fan, including making good the wall by plastering and finishing with the matching surface, etc., complete as per the direction of the engineer-in-charge. |
| 187 | 225/230 mm sweep. |
| 188 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 189 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 190 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 191 | Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium conductor armouredpower cable 1.1 KV grade of following size in the existing RCC/ HUME/ STONEWARE/ METAL/ DWC pipe as required. |
| 192 | 3½X 35 Sq.mm |
| 193 | 3½X 50 Sq.mm |
| 194 | Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium conductor armoured power cable 1.1 KV grade of following size in Masonry Open Duct Loose/loop/in panel etc. complete etc as required. |
| 195 | 3½X 35 Sq.mm |
| 196 | 3½X 50 Sq.mm |
| 197 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor armoured cable of 1.1 KV grade as required. |
| 198 | 3½ X 35 sq. mm (32mm) |
| 199 | 3½ X 50 sq. mm (35mm) |
| 200 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching(75 cm deep) and refilling etc. |
| 201 | 50 mm dianominal bore |
| 202 | Providing, laying, and fixing the following diameter G.I. pipe ISI marked (medium class) in the existing trench or bore, complete with G.I. fittings, etc. as required (for protection of the UG cable).50 MM |
| 203 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 204 | 63 mm dia ( OD-63 mm & ID-51 mm Nominal) |
| 205 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 206 | 63 mm dia ( OD-63 mm & ID-51 mm Nominal) |
| 207 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. ( Dismantling of feeder pillar / panel foundation/Open floors) |
| 208 | The road crossings of power cablethrough trenchless boring. Trenchless horizontal boring using Manual/ Machine Moling techniqueat 0.75 metre below the ground level for following size pipes,including survey of under ground utilities,excavation of pits,moling with the hole size not exceeding 20% of the pipe dia,backfilling, compaction and restoration of the pits to original condition etc. as required. The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction andrestoration of the pits to original condition. Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department. The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.i)Upto 200 mm dia DWC HDPE / G.I. /PVC |
| 209 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 210 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 211 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make:L&T /Legrand /ABB /Schneider) |
| 212 | 6 way (4 + 18+), Double door |
| 213 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 214 | 12 way, Double door |
| 215 | Dismantling of the existing switch accessories like switches, sockets, and MCBs, etc., as required. |
| 216 | Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store. |
| 217 | Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required. |
| 218 | Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store. |
| 219 | Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required. |
| 220 | Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required. |
| 221 | Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required. |
| 222 | Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.Above 25 mm conduits. |
| 223 | Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.Up to 25 mm conduit. |
| 224 | Dismanttling of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC. Upto 35 sq.mm |
| 225 | Less credit for the unserviciable items dismantled items during execution of the work. |
| 226 | Assorted MCB TP AND TP&N & OTHER SWITCHGEAR |
| 227 | Assorted PIANO Type Switches |
| 228 | Assorted PIANO Type Sockets |
| 229 | Assorted Bell push/PIANO Type |
| 230 | Assorted Call bell buzzer single phase |
| 231 | Assorted Brass batten/ angle holder/Brass Bracket |
| 232 | Assorted Fan regulator/resistance type |
| 233 | Assorted Telephone Socket outlet |
| 234 | Assorted T.V. Socket outlet |
| 235 | Assorted Capacitor, 3.15/2.50/2.25 mfd |
| 236 | Assorted 1200/1400 mm sweep ceiling Fanwith blades |
| 237 | Assorted Fresh Air FAN 200/250 |
| 238 | Assorted Exhaust fan 300/380/450 |
| 239 | Assorted Wall Bracket Fittings |
| 240 | Assorted fluorescent Light Fittings |
| 241 | Assorted Bulk Head Fittings |
| 242 | less credit for the dismantled Copper wirewires from light points/ circuit/ submain/power circuit wiring,. |
| 243 | less credit for the dismantled aluminium wirewires from light points/ circuit/ submain/power circuit wiring,. |
| 244 | Assorted metal switch box. |
| 245 | Assorted MCB DB SPN with out MCBs |
| 246 | Assorted MCB DB TPN without MCBs |
| 247 | Assorted MCB SP |
| 248 | Assorted MCB DP |
| 249 | Assorted MCB TP AND TP&N |
| 250 | Add 1.0633 multiplying factor for GST on DSR |
