Himachal Pradesh State Electricity Board-HPSEB has published Development Of Distribution Infrastructure At Central Zone Of Hpsebl Under Rdss (Mandi, Kullu, Hamirpur,Bilaspur Circle. Submission Date for this Tender is 25-06-2024. Infrastructure Work Tenders in Mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 11-Mar-2024 | Drawings | Technical Bid | 20-04-2024 |
2 | 11-Mar-2024 | Technical Specifications | Technical Bid | 20-04-2024 |
3 | 11-Mar-2024 | Addendum e-Reverse Auction | Terms and Conditions | 20-04-2024 |
4 | 18-Mar-2024 | Corrigendum No.1 | Terms and Conditions | 20-04-2024 |
5 | 02-Apr-2024 | List of Vendors | Other | 20-04-2024 |
6 | 19-Apr-2024 | Key Date Corrigendum No. 1 | Date | 06-05-2024 |
7 | 08-May-2024 | Key Date Corrigendum No. 2 | Date | 22-05-2024 |
8 | 25-May-2024 | Key Date Corrigendum 3 | Date | 28-05-2024 |
9 | 27-May-2024 | Key Date Corrigendum No. 4 | Date | 10-06-2024 |
10 | 12-Jun-2024 | Corrigendum No.5 | Date | 25-06-2024 |
FileName | File Description | File Size |
b9bf5569-d5aa-4184-bc6b-0c8e12cb8940.html | Tender Notice | 0 KB |
BOQ_130912.xls | Tender Document | 0 KB |
LatandLongofSubStations.pdf | Tender Document | 0 KB |
MeteorologicalDataCZ.pdf | Tender Document | 0 KB |
SBDPart1.pdf | Tender Document | 0 KB |
SBDPart2.pdf | Tender Document | 0 KB |
SBDPart3.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | AB Cablingworks ,33KV,22KV,11KV & LT Line overhead Line Ab Cabling & other Cabling Works as per technical specification, approved drawings and scope of work. |
2 | LT AB Cable |
3 | LT AB Cable on poles [Size: (3x95 Sq, mm ) +70sqmm (Insulated) +16 sqmm{Inclusive 3% sagging & wastage) |
4 | LT AB Cable on poles [Size: (3x95 Sq, mm ) +70sqmm +16 sqmm{Inclusive 3% sagging & wastage) |
5 | LT AB Cable on poles [Size: (3x95 Sq, mm ) +70sqmm (Insulated)+16 sqmm{Inclusive 3% sagging & wastage) |
6 | LT AB Cable on poles [Size: (3x95 Sq, mm ) +70sqmm +16 sqmm{Inclusive 3% sagging & wastage) |
7 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
8 | Muffs with concerete filling |
9 | Stay Set Complete |
10 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
11 | Full Clamp for stay |
12 | Anchoring Assembly for LT |
13 | Suspension Assembly for LT |
14 | Facade Hooks for LT |
15 | Distribution box 3 phase 5 connectors as per TS |
16 | Piercing Connector as per TS |
17 | Cable for SMDB 3.5Core X 35sqmm |
18 | LT Earthing set complete (preferbly coil earthing) |
19 | Red Oxide |
20 | Aluminium paint |
21 | LT ,ABCable3C x 185 + 1C x 150 (Insulated) + 1C x 16SqmmSq. mm {Inclusive 3% sagging & wastage) |
22 | LT ABCable on poles [Size: (3x185mm²) x 1 Cables {Inclusive 3% sagging & wastage) |
23 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
24 | Muffs with concerete filling |
25 | Stay Set Complete |
26 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
27 | Full Clamp for stay |
28 | Anchoring Assembly for LT |
29 | Suspension Assembly for LT |
30 | Facade Hooks for LT |
31 | Distribution box 3 phase 5 connectors as per TS |
32 | Piercing Connector as per TS |
33 | Cable for SMDB 3.5Core X 35sqmm |
34 | LT Earthing set complete (preferbly coil earthing) |
35 | Red Oxide |
36 | Aluminium paint |
37 | LT line with XLPE 3.5X185 mm² |
38 | LT XLPE Cable on poles [Size: (3.5X185mm²) {additional 1% sagging & wastage) |
39 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
40 | Muffs with concerete filling |
41 | Stay Set Complete |
42 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
43 | Full Clamp for stay |
44 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
45 | Half Clamp for Cross Arm |
46 | Anchoring Assembly for LT |
47 | Suspension Assembly for LT |
48 | Facade Hooks for LT |
49 | T-Jointing kit |
50 | LTEarthing set complete (preferbly coil earthing) |
51 | Red Oxide |
52 | Aluminium paint |
53 | Providing underground LT Line with XLPE insulated PVC sheathed ArmouredUnderground 1x400sqmm (4+1)Total=2.5CKM |
54 | Providing underground LT Line with PVC 1x400sqmm (4+1) |
55 | Prov. Straight through joint |
56 | Prov. Termination kit |
57 | RCC cable cover |
58 | Sand bag |
59 | Route and joint indicating stone |
60 | Inspection chamber |
61 | GI pipe earthing 40 mmx 2.5/3 mm B class |
62 | Pipe HDPE |
63 | Lug Alm creamping suiitable for LT line with PVC 1x400sqmm |
64 | GI flat 25x6 |
65 | Cleat HDPE for cable support |
66 | GI pipe 100 mm dia |
67 | Flat GI size 50x6 |
68 | Chanel 75x40 |
69 | Warning tape (printed PEUGutility protection) |
70 | Providing underground LT Line with XLPE insulated PVC sheathed ArmouredUnderground 1x300sqmm (4+1)Total=2CKM |
71 | Providing underground LT Line with PVC 1x300sqmm (4+1) |
72 | Prov. Straight through joint |
73 | Prov. Termination kit |
74 | RCC cable cover |
75 | Sand bag |
76 | Route and joint indicating stone |
77 | Inspection chamber |
78 | GI pipe earthing 40 mmx 2.5/3 mm B class |
79 | Pipe HDPE |
80 | Lug Alm creamping suiitable for LT line with PVC 1x300sqmm |
81 | GI flat 25x6 |
82 | Cleat HDPE for cable support |
83 | GI pipe 100 mm dia |
84 | Flat GI size 50x6 |
85 | Chanel 75x40 |
86 | Warning tape (printed PEUGutility protection) |
87 | HT Cabling |
88 | 11kv HT AB Cable3x95+70 Sq. mm (Insulated) {Inclusive 3% sagging & wastage) |
89 | HT ABCable on poles [Size: (3x95+70 (Insulated) Sq, mm ) {Inclusive 3% sagging & wastage) |
90 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
91 | Muffs with concerete filling |
92 | Stay Set Complete |
93 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
94 | Full Clamp for stay |
95 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
96 | Half Clamp for Cross Arm |
97 | Anchoring Assembly for HT |
98 | Suspension Assembly for HT |
99 | Facade Hooks for HT |
100 | Heat Shrinkable Straight Through Jointing Kit |
101 | Cable Termination kit |
102 | T-Jointing kit |
103 | HT Earthing set complete (preferbly coil earthing) |
104 | Red Oxide |
105 | Aluminium paint |
106 | 22kv HT AB Cable3x95+70 Sq. mm (Insulated) {Inclusive 3% sagging & wastage) |
107 | HT ABCable on poles [Size: (3x95+70 (Insulated) Sq, mm ) {Inclusive 3% sagging & wastage) |
108 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
109 | Muffs with concerete filling |
110 | Stay Set Complete |
111 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
112 | Full Clamp for stay |
113 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
114 | Half Clamp for Cross Arm |
115 | Anchoring Assembly for HT |
116 | Suspension Assembly for HT |
117 | Facade Hooks for HT |
118 | Heat Shrinkable Straight Through Jointing Kit |
119 | Cable Termination kit |
120 | T-Jointing kit |
121 | HT Earthing set complete (preferbly coil earthing) |
122 | Red Oxide |
123 | Aluminium paint |
124 | 11kv HT AB Cable on poles [Size: (3x185 +150 Sqmm (Insulated) ) {Inclusive 3% sagging & wastage) |
125 | HT AB Cable on poles [Size: (3x185 +150 Sqmm(Insulated) ) {Inclusive 3% sagging & wastage) |
126 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
127 | Muffs with concerete filling |
128 | Stay Set Complete |
129 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
130 | Full Clamp for stay |
131 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
132 | Half Clamp for Cross Arm |
133 | Anchoring Assembly for HT |
134 | Suspension Assembly for HT |
135 | Facade Hooks for HT |
136 | Heat Shrinkable Straight Through Jointing Kit |
137 | Cable Termination kit |
138 | T-Jointing kit |
139 | HT Earthing set complete (preferbly coil earthing) |
140 | Red Oxide |
141 | Aluminium paint |
142 | 11kv HT AB Cable3x120+95 Sq. mm (Insulated) {Inclusive 3% sagging & wastage) |
143 | 11KV HT ABCable on poles [Size: (3x120 +95Sq, mm ) {Inclusive 3% sagging & wastage) |
144 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
145 | Muffs with concerete filling |
146 | Stay Set Complete |
147 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
148 | Full Clamp for stay |
149 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
150 | Half Clamp for Cross Arm |
151 | Anchoring Assembly for HT |
152 | Suspension Assembly for HT |
153 | Facade Hooks for HT |
154 | Heat Shrinkable Straight Through Jointing Kit |
155 | Cable Termination kit |
156 | T-Jointing kit |
157 | HT Earthing set complete (preferbly coil earthing) |
158 | Red Oxide |
159 | Aluminium paint |
160 | 11kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
161 | 11 kv HT XLPEarmoured Cable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
162 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
163 | Muffs with concerete filling |
164 | Stay Set Complete |
165 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
166 | Full Clamp for stay |
167 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
168 | Half Clamp for Cross Arm |
169 | Anchoring Assembly for HT |
170 | Suspension Assembly for HT |
171 | Facade Hooks for HT |
172 | Heat Shrinkable Straight Through Jointing Kit |
173 | Cable Termination kit |
174 | T-Jointing kit |
175 | HT Earthing set complete (preferbly coil earthing) |
176 | Red Oxide |
177 | Aluminium paint |
178 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
179 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
180 | 11kv HT XLPE 3x240 sqmm XLPE(Armoured) Cable on poles [Size: (3x240 Sqmm ) {Inclusive 3% sagging & wastage) |
181 | 11 kV HT XLPE armoured Cableon poles [Size: 3x240 Sq. (mm²){Inclusive 3% sagging & wastage) |
182 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
183 | Muffs with concerete filling |
184 | Stay Set Complete |
185 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
186 | Full Clamp for stay |
187 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
188 | Half Clamp for Cross Arm |
189 | Anchoring Assembly for HT |
190 | Suspension Assembly for HT |
191 | Facade Hooks for HT |
192 | Heat Shrinkable Straight Through Jointing Kit |
193 | Cable Termination kit |
194 | T-Jointing kit |
195 | HT Earthing set complete (preferbly coil earthing) |
196 | Red Oxide |
197 | Aluminium paint |
198 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
199 | cable clamp made of GI sheet for 11kv 3x240 sq.mm |
200 | Providing 11KV XLPE 1x240 sqmm (Armoured) total-5.6 ckm |
201 | Providing 11KV XLPE 1x240 sqmm (3+1) |
202 | Prov. Straight through joint |
203 | Prov. Termination kit |
204 | RCC cable cover |
205 | Sand bag |
206 | Route and joint indicating stone |
207 | Inspection chamber |
208 | GI pipe earthing 40 mmx 2.5/3 mm B class |
209 | Pipe HDPE size 25 mm |
210 | Lug Alm creamping 70 sqmm XLPE single hole |
211 | GI flat 25x6 |
212 | Cleat HDPE for cable support |
213 | GI pipe 100 mm dia |
214 | Flat GI size 50x6 |
215 | Chanel 75x40 |
216 | Warning tape (printed PEUGutility protection) |
217 | Cabling of 33kV line with 1x300 Sq. mm XLPE UG armoured Cable (3+1)(12CKM) |
218 | 33 kV XLPE Cable [Size:1x300mm²) {additional 1% wastage)] |
219 | 33 kV Cable Straight Through Jointing Kit [Size: 1x300 mm²] |
220 | 33 kV Cable Indoor Termination Kit [Size: 1x300 mm²] |
221 | 33 kV Cable Heat Shrink Outdoor Termination Kit [Size: 1x300mm²] |
222 | RCC cable cover (2 feet Long) |
223 | Sand Bag (50 Kg) |
224 | Route and Joint indicating stone |
225 | Inspection Chamber |
226 | GI Pipe earthing 40 mm x 2.5/3 m "B" class |
227 | Pipe HDPE of suitable size for 33KV XLPE 1X300 mm2 |
228 | Lug AL Crimping 70 SQMM XLPE Single HOLE |
229 | Flat GI Size 25x6 mm |
230 | Cleat HDPE for Cable Support |
231 | G.I. Pipe 100 mm DIA "B" CLASS |
232 | Flat GI Size 50x6 mm |
233 | Channel MS Size 75x40 mm |
234 | Wiring tape (Printed PE UG utility Protection) |
235 | HVDS |
236 | Conversion LT to HT |
237 | LT to 11kv New Line on Steel Tubular Polewith Dog Conductor -100 Sq. mm |
238 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
239 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
240 | Muffs with concerete filling |
241 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
242 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
243 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
244 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
245 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
246 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
247 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
248 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
249 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
250 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
251 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
252 | HT Earthing set complete (REC Constr. Stand. J-1) |
253 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
254 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
255 | Eye Hook for earth wire |
256 | Earth Wire Clamp |
257 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
258 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
259 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
260 | Danger Plate |
261 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
262 | Barbed Wire |
263 | Red Oxide |
264 | Aluminium Paint |
265 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
266 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
267 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
268 | LT to22kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
269 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
270 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
271 | Muffs with concerete filling |
272 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
273 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
274 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
275 | 22 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
276 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
277 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
278 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
279 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
280 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
281 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
282 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
283 | HT Earthing set complete (REC Constr. Stand. J-1) |
284 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
285 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
286 | Eye Hook for earth wire |
287 | Earth Wire Clamp |
288 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
289 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
290 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
291 | Danger Plate |
292 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
293 | Barbed Wire |
294 | Red Oxide |
295 | Aluminium Paint |
296 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
297 | HVDS-New HT Line works as per Scope of Works |
298 | New 22kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
299 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
300 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
301 | Muffs with concerete filling |
302 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
303 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
304 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
305 | 22 kV Pin Insulators with GI Pin(Porcelain, 23 kV, 10 KN): 3 No per pole structure |
306 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
307 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
308 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
309 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
310 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
311 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
312 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
313 | HT Earthing set complete (REC Constr. Stand. J-1) |
314 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
315 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
316 | Eye Hook for earth wire |
317 | Earth Wire Clamp |
318 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
319 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
320 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
321 | Danger Plate |
322 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
323 | Barbed Wire |
324 | Red Oxide |
325 | Aluminium Paint |
326 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
327 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
328 | 11kv New Line on Steel Tubular Polewith Dog Conductor -100 Sq. mm |
329 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
330 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
331 | Muffs with concerete filling |
332 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
333 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
334 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
335 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
336 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
337 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
338 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
339 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
340 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
341 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
342 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
343 | HT Earthing set complete (REC Constr. Stand. J-1) |
344 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
345 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
346 | Eye Hook for earth wire |
347 | Earth Wire Clamp |
348 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
349 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
350 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
351 | Danger Plate |
352 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
353 | Barbed Wire |
354 | Red Oxide |
355 | Aluminium Paint |
356 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
357 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
358 | 11kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
359 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
360 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
361 | Muffs with concerete filling |
362 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
363 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
364 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
365 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
366 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
367 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
368 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
369 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
370 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
371 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
372 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
373 | HT Earthing set complete (REC Constr. Stand. J-1) |
374 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
375 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
376 | Eye Hook for earth wire |
377 | Earth Wire Clamp |
378 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
379 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
380 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
381 | Danger Plate |
382 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
383 | Barbed Wire |
384 | Red Oxide |
385 | Aluminium Paint |
386 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
387 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
388 | 11kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
389 | 11 kv HT XLPEarmoured Cable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
390 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
391 | Muffs with concerete filling |
392 | Stay Set Complete |
393 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
394 | Full Clamp for stay |
395 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
396 | Half Clamp for Cross Arm |
397 | Anchoring Assembly for HT |
398 | Suspension Assembly for HT |
399 | Facade Hooks for HT |
400 | Heat Shrinkable Straight Through Jointing Kit |
401 | Cable Termination kit |
402 | T-Jointing kit |
403 | HT Earthing set complete (preferbly coil earthing) |
404 | Red Oxide |
405 | Aluminium paint |
406 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
407 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
408 | 22kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
409 | 22 kv HT XLPEarmoured Cable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
410 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
411 | Muffs with concerete filling |
412 | Stay Set Complete |
413 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
414 | Full Clamp for stay |
415 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
416 | Half Clamp for Cross Arm |
417 | Anchoring Assembly for HT |
418 | Suspension Assembly for HT |
419 | Facade Hooks for HT |
420 | Heat Shrinkable Straight Through Jointing Kit |
421 | Cable Termination kit |
422 | T-Jointing kit |
423 | HT Earthing set complete (preferbly coil earthing) |
424 | Red Oxide |
425 | Aluminium paint |
426 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
427 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
428 | Supply ,Installation and commissioning of New DT as per scope of work |
429 | Distribution Transformer 25 kva , 11/.440v |
430 | Distribution Transformer (Ordinary), 11/0.4 kV,25 KVA |
431 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
432 | Muffs with concerete filling |
433 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
434 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
435 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
436 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
437 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
438 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
439 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
440 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
441 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
442 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
443 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
444 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
445 | D.O Fuse Unit 11KV |
446 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
447 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
448 | Stay set complete (HT) |
449 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
450 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
451 | LT Distribution Panel Box with MCCB(50A, 25 kA, 4P),O/G Kit Kit 63A 4Nos |
452 | Half Clamp (M.S. Flat 50X6 mm) |
453 | Full Clamps (M.S. Flat 50X6 mm) |
454 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
455 | Aluminium Thimble |
456 | Aluminium Thimble |
457 | Danger Plate |
458 | Barbed Wire |
459 | LT Cable (3.5 Core) 50 mm² |
460 | Red Oxide |
461 | Aluminium Paint |
462 | LT Switched Capacitors 4- KVAr for 25 KVA(rate per KVAr) |
463 | Distribution Transformer 63 kva , 11/.440v |
464 | Distribution Transformer (Ordinary), 11/0.4 kV,63 KVA |
465 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
466 | Muffs with concerete filling |
467 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
468 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
469 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
470 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
471 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
472 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
473 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
474 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
475 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
476 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
477 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
478 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
479 | D.O Fuse Unit 11KV |
480 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
481 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
482 | Stay set complete (HT) |
483 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
484 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
485 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(63A, 4No, rewirable) |
486 | Half Clamp (M.S. Flat 50X6 mm) |
487 | Full Clamps (M.S. Flat 50X6 mm) |
488 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
489 | Aluminium Thimble |
490 | Aluminium Thimble |
491 | Danger Plate |
492 | Barbed Wire |
493 | LT Cable (3.5 Core)120mm² |
494 | Red oxide |
495 | Aluminium Paint |
496 | LT Switched Capacitors 8- KVAr for 63KVA(rate per KVAr) |
497 | Distribution Transformer 100 KVA |
498 | Distribution Transformer (Ordinary), 11/0.4 kV,100 KVA |
499 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
500 | Muffs with concerete filling |
501 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
502 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
503 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
504 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
505 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
506 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
507 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
508 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
509 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
510 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
511 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
512 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
513 | D.O Fuse Unit 11KV |
514 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
515 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
516 | Stay set complete |
517 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
518 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
519 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(100A, 4No, rewirable) |
520 | Half Clamp (M.S. Flat 50X6 mm) |
521 | Full Clamps (M.S. Flat 50X6 mm) |
522 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
523 | Aluminium Thimble |
524 | Aluminium Thimble |
525 | Danger Plate |
526 | Barbed Wire |
527 | LT Cable (3.5 Core) 185 mm² |
528 | Red Oxide |
529 | Aluminium Paint |
530 | LT Switched Capacitors 12- KVAr for 100 KVA(rate per KVAr) |
531 | Distribution Transformer 25 kva , 22/.440KV |
532 | Distribution Transformer (Ordinary), 22/0.4 kV,25 KVA |
533 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
534 | Muffs with concerete filling |
535 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
536 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
537 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
538 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
539 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
540 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
541 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
542 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
543 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
544 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
545 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
546 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
547 | D.O Fuse Unit 22KV |
548 | Lightening Arrester, 18 kV Station Class(Porcelain Type) |
549 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
550 | Stay set complete (HT) |
551 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
552 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
553 | LT Distribution Panel Box with MCCB(50A, 25 kA, 4P),O/G Kit Kit 63A 4Nos |
554 | Half Clamp (M.S. Flat 50X6 mm) |
555 | Full Clamps (M.S. Flat 50X6 mm) |
556 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
557 | Aluminium Thimble |
558 | Aluminium Thimble |
559 | Danger Plate |
560 | Barbed Wire |
561 | LT Cable (3.5 Core) 50 mm² |
562 | Red Oxide |
563 | Aluminium Paint |
564 | LT Switched Capacitors 4- KVAr for 25 KVA(rate per KVAr) |
565 | Distribution Transformer 63 kva , 22/.440Kv |
566 | Distribution Transformer (Ordinary), 22/0.4 kV,63 KVA |
567 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
568 | Muffs with concerete filling |
569 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
570 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
571 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
572 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
573 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
574 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
575 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
576 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
577 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
578 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
579 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
580 | GO AB Switch Unit (22 kV, 400A, 25 KA ) Tripple pole O/D type |
581 | D.O Fuse Unit 22KV |
582 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
583 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
584 | Stay set complete (HT) |
585 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
586 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
587 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(63A, 4No, rewirable) |
588 | Half Clamp (M.S. Flat 50X6 mm) |
589 | Full Clamps (M.S. Flat 50X6 mm) |
590 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
591 | Aluminium Thimble |
592 | Aluminium Thimble |
593 | Danger Plate |
594 | Barbed Wire |
595 | LT Cable (3.5 Core)120mm² |
596 | Red oxide |
597 | Aluminium Paint |
598 | LT Switched Capacitors 8- KVAr for 63KVA(rate per KVAr) |
599 | Distribution Transformer 100 KVA (22KV) |
600 | Distribution Transformer (Ordinary), 22/0.4 kV,100 KVA |
601 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
602 | Muffs with concerete filling |
603 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
604 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
605 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
606 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
607 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
608 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
609 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
610 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
611 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
612 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
613 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
614 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
615 | D.O Fuse Unit 22KV |
616 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
617 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
618 | Stay set complete |
619 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
620 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
621 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(100A, 4No, rewirable) |
622 | Half Clamp (M.S. Flat 50X6 mm) |
623 | Full Clamps (M.S. Flat 50X6 mm) |
624 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
625 | Aluminium Thimble |
626 | Aluminium Thimble |
627 | Danger Plate |
628 | Barbed Wire |
629 | LT Cable (3.5 Core) 185 mm² |
630 | Red Oxide |
631 | Aluminium Paint |
632 | LT Switched Capacitors 12- KVAr for 100 KVA(rate per KVAr) |
633 | Conversion to LT Line toAB Cable |
634 | Conversion of bare conductor with 3x70 Sq. mmAB cable |
635 | LT ABCable on poles [Size: : 3x70mm²) + 50 sqmm(Insulated)+16sqmm x 1 Cables {Inclusive 3% sagging & wastage) |
636 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
637 | Muffs with concerete filling |
638 | Stay Set Complete |
639 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
640 | Full Clamp for stay |
641 | Anchoring Assembly for LT |
642 | Suspension Assembly for LT |
643 | Facade Hooks for LT |
644 | Distribution box 3 phase 5 connectors as per TS |
645 | Piercing Connector as per TS |
646 | Cable for SMDB 3.5Core X 35sqmm |
647 | T-Jointing kit |
648 | LT Earthing set complete (preferbly coil earthing) |
649 | Red Oxide |
650 | Aluminium paint |
651 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
652 | Conversion ofLT Line with ABCable3C x 185 + 1C x 150 (Insulated) + 1C x 16SqmmSq. mm {Inclusive 3% sagging & wastage) |
653 | LT ABCable on poles [Size: (3x185mm²) x 1 Cables {Inclusive 3% sagging & wastage) |
654 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
655 | Muffs with concerete filling |
656 | Stay Set Complete |
657 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
658 | Full Clamp for stay |
659 | Anchoring Assembly for LT |
660 | Suspension Assembly for LT |
661 | Facade Hooks for LT |
662 | Distribution box 3 phase 5 connectors as per TS |
663 | Piercing Connector as per TS |
664 | Cable for SMDB 3.5Core X 35sqmm |
665 | LT Earthing set complete (preferbly coil earthing) |
666 | Red Oxide |
667 | Aluminium paint |
668 | Feeder Bifurcation Works |
669 | Feeder Bifurcation Works-New HT Lines |
670 | New 22kv New Line on Steel Tubular Polewith Dog Conductor -100Sq. mm |
671 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
672 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
673 | Muffs with concerete filling |
674 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
675 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
676 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
677 | 22 kV Pin Insulators with GI Pin(Porcelain, 23 kV, 10 KN): 3 No per pole structure |
678 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
679 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
680 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
681 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
682 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
683 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
684 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
685 | HT Earthing set complete (REC Constr. Stand. J-1) |
686 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
687 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
688 | Eye Hook for earth wire |
689 | Earth Wire Clamp |
690 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
691 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
692 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
693 | Danger Plate |
694 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
695 | Barbed Wire |
696 | Red Oxide |
697 | Aluminium Paint |
698 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
699 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
700 | 11kv New Line on Steel Tubular Polewith Dog Conductor -100 Sq. mm |
701 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
702 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
703 | Muffs with concerete filling |
704 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
705 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
706 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
707 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
708 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
709 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
710 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
711 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
712 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
713 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
714 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
715 | HT Earthing set complete (REC Constr. Stand. J-1) |
716 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
717 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
718 | Eye Hook for earth wire |
719 | Earth Wire Clamp |
720 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
721 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
722 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
723 | Danger Plate |
724 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
725 | Barbed Wire |
726 | Red Oxide |
727 | Aluminium Paint |
728 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
729 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
730 | 11kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
731 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
732 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
733 | Muffs with concerete filling |
734 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
735 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
736 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
737 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
738 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
739 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
740 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
741 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
742 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
743 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
744 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
745 | HT Earthing set complete (REC Constr. Stand. J-1) |
746 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
747 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
748 | Eye Hook for earth wire |
749 | Earth Wire Clamp |
750 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
751 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
752 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
753 | Danger Plate |
754 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
755 | Barbed Wire |
756 | Red Oxide |
757 | Aluminium Paint |
758 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
759 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
760 | 11kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
761 | 11kv HT XLPE Cable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
762 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
763 | Muffs with concerete filling |
764 | Stay Set Complete |
765 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
766 | Full Clamp for stay |
767 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
768 | Half Clamp for Cross Arm |
769 | Anchoring Assembly for HT |
770 | Suspension Assembly for HT |
771 | Facade Hooks for HT |
772 | Heat Shrinkable Straight Through Jointing Kit |
773 | Cable Termination kit |
774 | T-Jointing kit |
775 | HT Earthing set complete (preferbly coil earthing) |
776 | Red Oxide |
777 | Aluminium paint |
778 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
779 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
780 | Feeder Bifurcation Works-DT |
781 | Supply ,Installation and commissioning of New DT as per scope of work |
782 | Distribution Transformer 25 kva , 11/.440v |
783 | Distribution Transformer (Ordinary), 11/0.4 kV,25 KVA |
784 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
785 | Muffs with concerete filling |
786 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
787 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
788 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
789 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
790 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
791 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
792 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
793 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
794 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
795 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
796 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
797 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
798 | D.O Fuse Unit 11KV |
799 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
800 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 11 kV, 90 kN) including Dead End Clamps etc.) |
801 | Stay set complete (HT) |
802 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
803 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
804 | LT Distribution Panel Box with MCCB(50A, 25 kA, 4P),O/G Kit Kit 63A 4Nos |
805 | Half Clamp (M.S. Flat 50X6 mm) |
806 | Full Clamps (M.S. Flat 50X6 mm) |
807 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
808 | Aluminium Thimble |
809 | Aluminium Thimble |
810 | Danger Plate |
811 | Barbed Wire |
812 | LT Cable (3.5 Core) 50 mm² |
813 | Red Oxide |
814 | Aluminium Paint |
815 | LT Switched Capacitors 4- KVAr for 25 KVA(rate per KVAr) |
816 | Distribution Transformer 63 kva , 11/.440v |
817 | Distribution Transformer (Ordinary), 11/0.4 kV,63 KVA |
818 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
819 | Muffs with concerete filling |
820 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
821 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
822 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
823 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
824 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
825 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
826 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
827 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
828 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
829 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
830 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
831 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
832 | D.O Fuse Unit 11KV |
833 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
834 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
835 | Stay set complete (HT) |
836 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
837 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
838 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(63A, 4No, rewirable) |
839 | Half Clamp (M.S. Flat 50X6 mm) |
840 | Full Clamps (M.S. Flat 50X6 mm) |
841 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
842 | Aluminium Thimble |
843 | Aluminium Thimble |
844 | Danger Plate |
845 | Barbed Wire |
846 | LT Cable (3.5 Core)120mm² |
847 | Red oxide |
848 | Aluminium Paint |
849 | LT Switched Capacitors 8- KVAr for 63KVA(rate per KVAr) |
850 | Distribution Transformer 100 KVA |
851 | Distribution Transformer (Ordinary), 11/0.4 kV,100 KVA |
852 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
853 | Muffs with concerete filling |
854 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
855 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
856 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
857 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
858 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
859 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
860 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
861 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
862 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
863 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
864 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
865 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
866 | D.O Fuse Unit 11KV |
867 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
868 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
869 | Stay set complete |
870 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
871 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
872 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(100A, 4No, rewirable) |
873 | Half Clamp (M.S. Flat 50X6 mm) |
874 | Full Clamps (M.S. Flat 50X6 mm) |
875 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
876 | Aluminium Thimble |
877 | Aluminium Thimble |
878 | Danger Plate |
879 | Barbed Wire |
880 | LT Cable (3.5 Core) 185 mm² |
881 | Red Oxide |
882 | Aluminium Paint |
883 | LT Switched Capacitors 12- KVAr for 100 KVA(rate per KVAr) |
884 | Distribution Transformer 250 KVA |
885 | Distribution Transformer (Ordinary), 11/0.4 kV,250 KVA |
886 | Steel Tubular Poles (10 m, Working Load > 300 kgf/m²) |
887 | Muffs with concerete filling |
888 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
889 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
890 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
891 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
892 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
893 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
894 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
895 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
896 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
897 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
898 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
899 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
900 | D.O Fuse Unit 11KV |
901 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
902 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
903 | Stay set complete |
904 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
905 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
906 | LT Distribution Panel Box with MCCB(400A, 50kA, 4P) and SFU(150A, 4No MCCB) |
907 | Half Clamp (M.S. Flat 50X6 mm) |
908 | Full Clamps (M.S. Flat 50X6 mm) |
909 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
910 | Aluminium Thimble |
911 | Aluminium Thimble |
912 | Danger Plate |
913 | Barbed Wire |
914 | LT Cable (3.5 Core) 300 mm² |
915 | Red Oxide |
916 | Aluminium Paint |
917 | LT Switched Capacitors 36- KVAr for 250 KVA(rate per KVAr) |
918 | Transformer Bed( Civil Work (As Per HPSR)) |
919 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
920 | Distribution Transformer 63 kva , 22/.4kv |
921 | Distribution Transformer (Ordinary), 22/0.4 kV,63 KVA |
922 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
923 | Muffs with concerete filling |
924 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
925 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
926 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
927 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
928 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
929 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
930 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
931 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
932 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
933 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
934 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
935 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
936 | D.O Fuse Unit 22KV |
937 | Lightening Arrester, 18 kV Station Class(Porcelain Type) |
938 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
939 | Stay set complete (HT) |
940 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
941 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
942 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(32A, 4No, rewirable) |
943 | Half Clamp (M.S. Flat 50X6 mm) |
944 | Full Clamps (M.S. Flat 50X6 mm) |
945 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
946 | Aluminium Thimble |
947 | Aluminium Thimble |
948 | Danger Plate |
949 | Barbed Wire |
950 | LT Cable (3.5 Core) 120 mm² |
951 | Red Oxide |
952 | Aluminium Paint |
953 | LT Switched Capacitors 8- KVAr for 63 KVA(rate per KVAr) |
954 | Distribution Transformer 100 KVA (22KV) |
955 | Distribution Transformer (Ordinary), 22/0.4 kV,100 KVA |
956 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
957 | Muffs with concerete filling |
958 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
959 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
960 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
961 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
962 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
963 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
964 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
965 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
966 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
967 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
968 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
969 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
970 | D.O Fuse Unit 22KV |
971 | Lightening Arrester, 22 kV Station Class(Porcelain Type) |
972 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
973 | Stay set complete |
974 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
975 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
976 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(100A, 4No, rewirable) |
977 | Half Clamp (M.S. Flat 50X6 mm) |
978 | Full Clamps (M.S. Flat 50X6 mm) |
979 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
980 | Aluminium Thimble |
981 | Aluminium Thimble |
982 | Danger Plate |
983 | Barbed Wire |
984 | LT Cable (3.5 Core) 185 mm² |
985 | Red Oxide |
986 | Aluminium Paint |
987 | LT Switched Capacitors 12- KVAr for 100 KVA(rate per KVAr) |
988 | Feeder Bifurcation-New LT Lines |
989 | New LT Line -single phase two wireon rabbit conductor -50 Sq. mm |
990 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
991 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
992 | Muffs with concerete filling |
993 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
994 | Shackle Insulator (16 kN) |
995 | D-Iron (U- Clamps) |
996 | Earth Knob |
997 | LT Stay Set Complete |
998 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
999 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1000 | Earthing Set complete |
1001 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1002 | Spool Tie |
1003 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1004 | Aluminium Paint |
1005 | Red Oxide |
1006 | New LT Line -Three phase four wireon rabbit conductor -50 Sq. mm |
1007 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
1008 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1009 | Muffs with concerete filling |
1010 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1011 | Shackle Insulator (16 kN) |
1012 | D-Iron (U- Clamps) |
1013 | Earth Knob |
1014 | LT Stay Set |
1015 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1016 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1017 | Earthing Set complete |
1018 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1019 | Spool Tie |
1020 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1021 | Aluminium Paint |
1022 | Red Oxide |
1023 | Spiral PVC Spacer |
1024 | Feeder Segeration-New HT Lines |
1025 | 11kv New Line on Steel Tubular Polewith Dog Conductor -100 Sq. mm |
1026 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
1027 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1028 | Muffs with concerete filling |
1029 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
1030 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
1031 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1032 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1033 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1034 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1035 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1036 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1037 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
1038 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1039 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1040 | HT Earthing set complete (REC Constr. Stand. J-1) |
1041 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1042 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
1043 | Eye Hook for earth wire |
1044 | Earth Wire Clamp |
1045 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
1046 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1047 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1048 | Danger Plate |
1049 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1050 | Barbed Wire |
1051 | Red Oxide |
1052 | Aluminium Paint |
1053 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1054 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1055 | New 22kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
1056 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
1057 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1058 | Muffs with concerete filling |
1059 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
1060 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
1061 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1062 | 22 kV Pin Insulators with GI Pin(Porcelain, 23 kV, 10 KN): 3 No per pole structure |
1063 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1064 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1065 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1066 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1067 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
1068 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1069 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1070 | HT Earthing set complete (REC Constr. Stand. J-1) |
1071 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1072 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
1073 | Eye Hook for earth wire |
1074 | Earth Wire Clamp |
1075 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
1076 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1077 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1078 | Danger Plate |
1079 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1080 | Barbed Wire |
1081 | Red Oxide |
1082 | Aluminium Paint |
1083 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1084 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
1085 | 11kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
1086 | 11kv HT XLPE Cable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
1087 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1088 | Muffs with concerete filling |
1089 | Stay Set Complete |
1090 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1091 | Full Clamp for stay |
1092 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
1093 | Half Clamp for Cross Arm |
1094 | Anchoring Assembly for HT |
1095 | Suspension Assembly for HT |
1096 | Facade Hooks for HT |
1097 | Heat Shrinkable Straight Through Jointing Kit |
1098 | Cable Termination kit |
1099 | T-Jointing kit |
1100 | HT Earthing set complete (preferbly coil earthing) |
1101 | Red Oxide |
1102 | Aluminium paint |
1103 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
1104 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
1105 | 22kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
1106 | 22kv HT XLPE Cable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
1107 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1108 | Muffs with concerete filling |
1109 | Stay Set Complete |
1110 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1111 | Full Clamp for stay |
1112 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
1113 | Half Clamp for Cross Arm |
1114 | Anchoring Assembly for HT |
1115 | Suspension Assembly for HT |
1116 | Facade Hooks for HT |
1117 | Heat Shrinkable Straight Through Jointing Kit |
1118 | Cable Termination kit |
1119 | T-Jointing kit |
1120 | HT Earthing set complete (preferbly coil earthing) |
1121 | Red Oxide |
1122 | Aluminium paint |
1123 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
1124 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
1125 | Feeder Segeration Works-DT |
1126 | Supply ,Installation and commissioning of New DT as per scope of work |
1127 | Distribution Transformer 63 kva , 11/.440v |
1128 | Distribution Transformer (Ordinary), 11/0.4 kV,63 KVA |
1129 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1130 | Muffs with concerete filling |
1131 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
1132 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
1133 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1134 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1135 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1136 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1137 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1138 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1139 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1140 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1141 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
1142 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1143 | D.O Fuse Unit 11KV |
1144 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1145 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1146 | Stay set complete (HT) |
1147 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1148 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1149 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(63A, 4No, rewirable) |
1150 | Half Clamp (M.S. Flat 50X6 mm) |
1151 | Full Clamps (M.S. Flat 50X6 mm) |
1152 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1153 | Aluminium Thimble |
1154 | Aluminium Thimble |
1155 | Danger Plate |
1156 | Barbed Wire |
1157 | LT Cable (3.5 Core)120mm² |
1158 | Red oxide |
1159 | Aluminium Paint |
1160 | LT Switched Capacitors 8- KVAr for 63KVA(rate per KVAr) |
1161 | Feeder Segeration-New LT Lines |
1162 | LT AB Cable on poles [Size: (3x95+70 (Insulated) +16 (insulated) Sqmm ) {Inclusive 3% sagging & wastage) |
1163 | LT AB Cable on poles [Size: (3x95 Sq, mm ) +70sqmm (Insulated)+16 sqmm{Inclusive 3% sagging & wastage) |
1164 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1165 | Muffs with concerete filling |
1166 | Stay Set Complete |
1167 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1168 | Full Clamp for stay |
1169 | Anchoring Assembly for LT |
1170 | Suspension Assembly for LT |
1171 | Facade Hooks for LT |
1172 | Distribution box 3 phase 5 connectors as per TS |
1173 | Piercing Connector as per TS |
1174 | Cable for SMDB 3.5Core X 35sqmm |
1175 | LT Earthing set complete (preferbly coil earthing) |
1176 | Red Oxide |
1177 | Aluminium paint |
1178 | New LT Line -single phase two wireon rabbit conductor -50 Sq. mm |
1179 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
1180 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1181 | Muffs with concerete filling |
1182 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1183 | Shackle Insulator (16 kN) |
1184 | D-Iron (U- Clamps) |
1185 | Earth Knob |
1186 | LT Stay Set Complete |
1187 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1188 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1189 | Earthing Set complete |
1190 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1191 | Spool Tie |
1192 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1193 | Aluminium Paint |
1194 | Red Oxide |
1195 | New LT Line -Three phase four wireon rabbit conductor -50 Sq. mm |
1196 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
1197 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1198 | Muffs with concerete filling |
1199 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1200 | Shackle Insulator (16 kN) |
1201 | D-Iron (U- Clamps) |
1202 | Earth Knob |
1203 | LT Stay Set |
1204 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1205 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1206 | Earthing Set complete |
1207 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1208 | Spool Tie |
1209 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1210 | Aluminium Paint |
1211 | Red Oxide |
1212 | Spiral PVC Spacer |
1213 | NEW HT Lines |
1214 | New 22kv New Line on Steel Tubular Polewith Dog Conductor -100Sq. mm |
1215 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
1216 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1217 | Muffs with concerete filling |
1218 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
1219 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
1220 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1221 | 22 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1222 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1223 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1224 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1225 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1226 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
1227 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1228 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1229 | HT Earthing set complete (REC Constr. Stand. J-1) |
1230 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1231 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
1232 | Eye Hook for earth wire |
1233 | Earth Wire Clamp |
1234 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
1235 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1236 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1237 | Danger Plate |
1238 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1239 | Barbed Wire |
1240 | Red Oxide |
1241 | Aluminium Paint |
1242 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1243 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
1244 | 11kv New Line on Steel Tubular Polewith Dog Conductor -100 Sq. mm |
1245 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
1246 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1247 | Muffs with concerete filling |
1248 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
1249 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
1250 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1251 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1252 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1253 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1254 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1255 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1256 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
1257 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1258 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1259 | HT Earthing set complete (REC Constr. Stand. J-1) |
1260 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1261 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
1262 | Eye Hook for earth wire |
1263 | Earth Wire Clamp |
1264 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
1265 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1266 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1267 | Danger Plate |
1268 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1269 | Barbed Wire |
1270 | Red Oxide |
1271 | Aluminium Paint |
1272 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1273 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1274 | 11kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
1275 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
1276 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1277 | Muffs with concerete filling |
1278 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
1279 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
1280 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1281 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1282 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1283 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1284 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1285 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1286 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
1287 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1288 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1289 | HT Earthing set complete (REC Constr. Stand. J-1) |
1290 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1291 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
1292 | Eye Hook for earth wire |
1293 | Earth Wire Clamp |
1294 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
1295 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1296 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1297 | Danger Plate |
1298 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1299 | Barbed Wire |
1300 | Red Oxide |
1301 | Aluminium Paint |
1302 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1303 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1304 | NEW LT Lines (on New DTRs) |
1305 | New LT Line -single phase two wireon rabbit conductor -50 Sq. mm |
1306 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
1307 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1308 | Muffs with concerete filling |
1309 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1310 | Shackle Insulator (16 kN) |
1311 | D-Iron (U- Clamps) |
1312 | Earth Knob |
1313 | LT Stay Set Complete |
1314 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1315 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1316 | Earthing Set complete |
1317 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1318 | Spool Tie |
1319 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1320 | Aluminium Paint |
1321 | Red Oxide |
1322 | New LT Line -Three phase four wireon rabbit conductor -50 Sq. mm |
1323 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
1324 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1325 | Muffs with concerete filling |
1326 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1327 | Shackle Insulator (16 kN) |
1328 | D-Iron (U- Clamps) |
1329 | Earth Knob |
1330 | LT Stay Set |
1331 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1332 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1333 | Earthing Set complete |
1334 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1335 | Spool Tie |
1336 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1337 | Aluminium Paint |
1338 | Red Oxide |
1339 | Spiral PVC Spacer |
1340 | New LT Line -Three phase four wireon Dog conductor -100 Sq. mm |
1341 | ACSR 6/1/4.72 {Includes 4 conductor lengths for 3F, 4 wire and Inclusive 3% (Sag, Jumpering and wastage} |
1342 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1343 | Muffs with concerete filling |
1344 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1345 | Shackle Insulator (16 kN) |
1346 | D-Iron (U- Clamps) |
1347 | Earth Knob |
1348 | LT Stay Set |
1349 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1350 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1351 | Earthing Set complete |
1352 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1353 | Spool Tie |
1354 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1355 | Aluminium Paint |
1356 | Red Oxide |
1357 | Spiral PVC Spacer |
1358 | New DT |
1359 | Supply ,Installation and commissioning of New DT as per scope of work |
1360 | Distribution Transformer 25 kva , 11/.440v |
1361 | Distribution Transformer (Ordinary), 11/0.4 kV,25 KVA |
1362 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1363 | Muffs with concerete filling |
1364 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
1365 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
1366 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1367 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1368 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1369 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1370 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1371 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1372 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1373 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1374 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1375 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1376 | D.O Fuse Unit 11KV |
1377 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1378 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 11 kV, 90 kN) including Dead End Clamps etc.) |
1379 | Stay set complete (HT) |
1380 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1381 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1382 | LT Distribution Panel Box with MCCB(50A, 25 kA, 4P),O/G Kit Kit 63A 4Nos |
1383 | Half Clamp (M.S. Flat 50X6 mm) |
1384 | Full Clamps (M.S. Flat 50X6 mm) |
1385 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1386 | Aluminium Thimble |
1387 | Aluminium Thimble |
1388 | Danger Plate |
1389 | Barbed Wire |
1390 | LT Cable (3.5 Core) 50 mm² |
1391 | Red Oxide |
1392 | Aluminium Paint |
1393 | LT Switched Capacitors 4- KVAr for 25 KVA(rate per KVAr) |
1394 | Distribution Transformer 63 kva , 11/.440v |
1395 | Distribution Transformer (Ordinary), 11/0.4 kV,63 KVA |
1396 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1397 | Muffs with concerete filling |
1398 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
1399 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
1400 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1401 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1402 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1403 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1404 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1405 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1406 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1407 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1408 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
1409 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1410 | D.O Fuse Unit 11KV |
1411 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1412 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1413 | Stay set complete (HT) |
1414 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1415 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1416 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(63A, 4No, rewirable) |
1417 | Half Clamp (M.S. Flat 50X6 mm) |
1418 | Full Clamps (M.S. Flat 50X6 mm) |
1419 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1420 | Aluminium Thimble |
1421 | Aluminium Thimble |
1422 | Danger Plate |
1423 | Barbed Wire |
1424 | LT Cable (3.5 Core)120mm² |
1425 | Red oxide |
1426 | Aluminium Paint |
1427 | LT Switched Capacitors 8- KVAr for 63KVA(rate per KVAr) |
1428 | Distribution Transformer 100 KVA |
1429 | Distribution Transformer (Ordinary), 11/0.4 kV,100 KVA |
1430 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1431 | Muffs with concerete filling |
1432 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
1433 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
1434 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1435 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1436 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1437 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1438 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1439 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1440 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1441 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1442 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
1443 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1444 | D.O Fuse Unit 11KV |
1445 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1446 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1447 | Stay set complete |
1448 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1449 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1450 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(100A, 4No, rewirable) |
1451 | Half Clamp (M.S. Flat 50X6 mm) |
1452 | Full Clamps (M.S. Flat 50X6 mm) |
1453 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1454 | Aluminium Thimble |
1455 | Aluminium Thimble |
1456 | Danger Plate |
1457 | Barbed Wire |
1458 | LT Cable (3.5 Core) 185 mm² |
1459 | Red Oxide |
1460 | Aluminium Paint |
1461 | LT Switched Capacitors 12- KVAr for 100 KVA(rate per KVAr) |
1462 | Distribution Transformer 250 KVA |
1463 | Distribution Transformer (Ordinary), 11/0.4 kV,250 KVA |
1464 | Steel Tubular Poles (10 m, Working Load > 300 kgf/m²) |
1465 | Muffs with concerete filling |
1466 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
1467 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
1468 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1469 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1470 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1471 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1472 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1473 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1474 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1475 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1476 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
1477 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1478 | D.O Fuse Unit 11KV |
1479 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1480 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1481 | Stay set complete |
1482 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1483 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1484 | LT Distribution Panel Box with MCCB(400A, 50kA, 4P) and SFU(150A, 4No MCCB) |
1485 | Half Clamp (M.S. Flat 50X6 mm) |
1486 | Full Clamps (M.S. Flat 50X6 mm) |
1487 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1488 | Aluminium Thimble |
1489 | Aluminium Thimble |
1490 | Danger Plate |
1491 | Barbed Wire |
1492 | LT Cable (3.5 Core) 300 mm² |
1493 | Transformer Bed( Civil Work (As Per HPSR)) |
1494 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1495 | Red Oxide |
1496 | Aluminium Paint |
1497 | LT Switched Capacitors 36- KVAr for 250 KVA(rate per KVAr) |
1498 | Distribution Transformer 400 KVA |
1499 | Distribution Transformer (Ordinary), 11/0.4 kV,400 KVA |
1500 | Steel Tubular Poles (10 m, Working Load > 300 kgf/m²) |
1501 | Muffs with concerete filling |
1502 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
1503 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
1504 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1505 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1506 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1507 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1508 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1509 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1510 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1511 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1512 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
1513 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1514 | D.O Fuse Unit 11KV |
1515 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1516 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1517 | Stay set complete |
1518 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1519 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1520 | LT Distribution Panel Box with ACB(630A, 50kA, 4P) and SFU(250A, 4No MCCB) |
1521 | LT Cable (3.5 Core) 400 mm²X 2 incommer |
1522 | LT Cable (3.5 Core) 70 mm²X 4 Outgoing |
1523 | Transformer Bed( Civil Work (As Per HPSR)) |
1524 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1525 | Half Clamp (M.S. Flat 50X6 mm) |
1526 | Full Clamps (M.S. Flat 50X6 mm) |
1527 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1528 | Aluminium Thimble |
1529 | Aluminium Thimble |
1530 | Danger Plate |
1531 | Barbed Wire |
1532 | Red Oxide |
1533 | Aluminium Paint |
1534 | LT Switched Capacitors 60- KVAr for 400 KVA(rate per KVAr) |
1535 | Distribution Transformer 630 KVA |
1536 | Distribution Transformer (Ordinary), 11/0.4 kV,630 KVA |
1537 | Steel Tubular Poles (10 m, Working Load > 300 kgf/m²) |
1538 | Muffs with concerete filling |
1539 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
1540 | MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA"s |
1541 | X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1542 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1543 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1544 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1545 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1546 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1547 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1548 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1549 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
1550 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
1551 | D.O Fuse Unit 11KV |
1552 | Lightening Arrester, 9 kV Station Class(Porcelain Type) |
1553 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1554 | Stay set complete |
1555 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1556 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1557 | LT Distribution Panel Box with ACB(1000A, 50kA, 4P) and SFU(250A, 4No MCCB) |
1558 | LT Cable (3.5 Core) 400 mm²X 2 incommer |
1559 | LT Cable (3.5 Core) 95 mm²X 4 Outgoing |
1560 | Transformer Bed( Civil Work (As Per HPSR)) |
1561 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1562 | Half Clamp (M.S. Flat 50X6 mm) |
1563 | Full Clamps (M.S. Flat 50X6 mm) |
1564 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1565 | Aluminium Thimble |
1566 | Aluminium Thimble |
1567 | Danger Plate |
1568 | Barbed Wire |
1569 | Red Oxide |
1570 | Aluminium Paint |
1571 | LT Switched Capacitors 60KVAr for 630 KVA(rate per KVAr) |
1572 | Distribution Transformer 25 kva , 22/.440v |
1573 | Distribution Transformer (Ordinary), 22/0.4 kV,25 KVA |
1574 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1575 | Muffs with concerete filling |
1576 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
1577 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
1578 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1579 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1580 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1581 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1582 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1583 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1584 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1585 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1586 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1587 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
1588 | D.O Fuse Unit 22KV |
1589 | Lightening Arrester, 18 kV Station Class(Porcelain Type) |
1590 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1591 | Stay set complete (HT) |
1592 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1593 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1594 | LT Distribution Panel Box with MCCB(50A, 25 kA, 4P),O/G Kit Kit 63A 4Nos |
1595 | Half Clamp (M.S. Flat 50X6 mm) |
1596 | Full Clamps (M.S. Flat 50X6 mm) |
1597 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1598 | Aluminium Thimble |
1599 | Aluminium Thimble |
1600 | Danger Plate |
1601 | Barbed Wire |
1602 | LT Cable (3.5 Core) 50 mm² |
1603 | Red Oxide |
1604 | Aluminium Paint |
1605 | LT Switched Capacitors 4- KVAr for 25 KVA(rate per KVAr) |
1606 | Distribution Transformer 63 kva , 22/.4kv |
1607 | Distribution Transformer (Ordinary), 22/0.4 kV,63 KVA |
1608 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1609 | Muffs with concerete filling |
1610 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
1611 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA"s |
1612 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
1613 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
1614 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
1615 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1616 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
1617 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
1618 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
1619 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
1620 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
1621 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
1622 | D.O Fuse Unit 22KV |
1623 | Lightening Arrester, 18 kV Station Class(Porcelain Type) |
1624 | Discs insulator sets (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
1625 | Stay set complete (HT) |
1626 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1627 | Substation Pipe Earthing Complete Set(REC Constr. Stand. J-1) Inclusive MS Flat 50x6 |
1628 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(32A, 4No, rewirable) |
1629 | Half Clamp (M.S. Flat 50X6 mm) |
1630 | Full Clamps (M.S. Flat 50X6 mm) |
1631 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1632 | Aluminium Thimble |
1633 | Aluminium Thimble |
1634 | Danger Plate |
1635 | Barbed Wire |
1636 | LT Cable (3.5 Core) 120 mm² |
1637 | Red Oxide |
1638 | Aluminium Paint |
1639 | LT Switched Capacitors 8- KVAr for 63 KVA(rate per KVAr) |
1640 | Augmentation of DT as per given Scope of work |
1641 | Augmentation of DT 25 KVA to 63 KVA |
1642 | Distribution Transformer (Ordinary), 11/0.4 kV,63 KVA |
1643 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(32A, 4No, rewirable) |
1644 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1645 | Aluminium Thimble |
1646 | Aluminium Thimble |
1647 | Danger Plate |
1648 | LT Cable (3.5 Core)120mm² |
1649 | Red Oxide |
1650 | Aluminium Paint |
1651 | LT Switched Capacitors 8- KVAr for 63 KVA(rate per KVAr) |
1652 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1653 | Augmentation of DT 63 KVA to 100KVA |
1654 | Distribution Transformer (Ordinary), 11/0.4 kV,100 KVA |
1655 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(16A, 4No, rewirable) |
1656 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1657 | Aluminium Thimble |
1658 | Aluminium Thimble |
1659 | Danger Plate |
1660 | LT Cable (3.5 Core) 185 mm² |
1661 | Red oxide |
1662 | Aluminium Paint |
1663 | LT Switched Capacitors 12- KVAr for 100KVA(rate per KVAr) |
1664 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1665 | Augmentation of DT 100 KVA to 250KVA |
1666 | Distribution Transformer (Ordinary), 11/0.4 kV,250 KVA |
1667 | LT Distribution Panel Box with ACB(400A, 50 kA, 4P,1 No) and SFU(150A, 4No MCCB) |
1668 | Half Clamp (M.S. Flat 50X6 mm) |
1669 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1670 | Aluminium Thimble |
1671 | Aluminium Thimble |
1672 | LT Cable (3.5 Core) 300 mm² |
1673 | LT Switched Capacitors 36- KVAr for 250KVA(rate per KVAr) |
1674 | Civil Work Bedfor 250 KVA DT(As PER HPSR) |
1675 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1676 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1677 | Augmentation of DT 250 KVA to 400KVA |
1678 | Distribution Transformer (Ordinary), 11/0.4 kV,400 KVA |
1679 | LT Distribution Panel Box with ACB(630AI/C, 50 kA, 4P, & o/G 4 Nos MCCB 200A |
1680 | Half Clamp (M.S. Flat 50X6 mm) |
1681 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1682 | Aluminium Thimble |
1683 | Aluminium Thimble |
1684 | LT Cable (3.5 Core) 400 mm²X 2 incommer |
1685 | LT Cable (3.5 Core) 70 mm²X 4 Outgoing |
1686 | LT Switched Capacitors 60 KVAr for 400KVA(rate per KVAr) |
1687 | Civil Work Bedfor 400 KVA DT(As PER HPSR) |
1688 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1689 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1690 | Augmentation of DT 400KVA to 630KVA |
1691 | 630 KVA,11/0.4KV DISTRIBUTION TRANSFORMER, |
1692 | Transformer Bed( Civil Work (As Per HPSR)) |
1693 | LT Distribution Panel Box with ACB(1000A, 50 kA, 4P and SFU 4Nos MCCB 250A |
1694 | M.S. NUTS &BOLTS OFF SIZES |
1695 | Aluminium Thimble |
1696 | Aluminium Thimble |
1697 | LT Cable (3.5 Core) 400 mm² x 2 incoming |
1698 | LT Cable (3.5 Core) 95 mm² x 4outgoing feeder |
1699 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1700 | Red Oxide |
1701 | Aluminium paint |
1702 | LT Switched Capacitors 60 KVAr for 630KVA(rate per KVAr) |
1703 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1704 | Augmentation of DT 25 KVA to 63 KVAon 22kv line |
1705 | Distribution Transformer (Ordinary), 22/0.4 kV,63 KVA |
1706 | LT Distribution Panel Box with MCCB(100A, 25 kA, 4P) and SFU(32A, 4No, rewirable) |
1707 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1708 | Aluminium Thimble |
1709 | Aluminium Thimble |
1710 | Danger Plate |
1711 | LT Cable (3.5 Core)120mm² |
1712 | Red Oxide |
1713 | Aluminium Paint |
1714 | LT Switched Capacitors 8- KVAr for 63 KVA(rate per KVAr) |
1715 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1716 | Augmentation of DT 63 KVA to 100KVA on 22kv line |
1717 | Distribution Transformer (Ordinary), 22/0.4 kV,100 KVA |
1718 | LT Distribution Panel Box with MCCB(160A, 25 kA, 4P) and SFU(16A, 4No, rewirable) |
1719 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1720 | Aluminium Thimble |
1721 | Aluminium Thimble |
1722 | Danger Plate |
1723 | LT Cable (3.5 Core) 185 mm² |
1724 | Red Oxide |
1725 | Aluminium Paint |
1726 | LT Switched Capacitors 12- KVAr for 100KVA(rate per KVAr) |
1727 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1728 | Augmentation of DT 100 KVA to 250KVA on 22kv line |
1729 | Distribution Transformer (Ordinary), 22/0.4 kV,250 KVA |
1730 | LT Distribution Panel Box with MCCB(400A, 50kA, 4P) and SFU(150A, 4No MCCB) |
1731 | Half Clamp (M.S. Flat 50X6 mm) |
1732 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1733 | Aluminium Thimble |
1734 | Aluminium Thimble |
1735 | LT Cable (3.5 Core) 300 mm² |
1736 | Civil Work Bedfor 250 KVA DT(As PER HPSR) |
1737 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1738 | LT Switched Capacitors 36 KVAr for 250KVA(rate per KVAr) |
1739 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1740 | Augmentation of DT 250 KVA to 400KVA on 22kv line |
1741 | Distribution Transformer (Ordinary), 22/0.4 kV,400 KVA |
1742 | LT Distribution Panel Box with ACB(630A, 50kA, 4P) and SFU(250A, 4No MCCB) |
1743 | Half Clamp (M.S. Flat 50X6 mm) |
1744 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1745 | Aluminium Thimble |
1746 | Aluminium Thimble |
1747 | LT Cable (3.5 Core) 400 mm²X 2 incommer |
1748 | LT Cable (3.5 Core) 70 mm²X 6 Outgoing |
1749 | Civil Work Bedfor 400 KVA DT(As PER HPSR) |
1750 | Chain link welded fencing , Angle Iron ,Gate etc for transformer fencing |
1751 | Capacitor Bank of 60 KVR for 400kVA, |
1752 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1753 | Augmentation of DT 400KVA to 630 KVA |
1754 | 630 KVA,22/0.4KV DISTRIBUTION TRANSFORMER, |
1755 | Transformer Bed( Civil Work (As Per HPSR)) |
1756 | LT Distribution Panel Box with ACB(1000A, 50kA, 4P) and SFU(250A, 4No MCCB) |
1757 | M.S. NUTS &BOLTS OFF SIZES |
1758 | Aluminium Thimble |
1759 | Aluminium Thimble |
1760 | LT Cable (3.5 Core) 400 mm²X 2 incommer |
1761 | LT Cable (3.5 Core) 95 mm²X 4 Outgoing |
1762 | Chain Link fencing , Angle Iron ,Gate etc for transformer fencing |
1763 | Red Oxide |
1764 | Aluminium paint |
1765 | LT Switched Capacitors 60 KVAr for 630KVA(rate per KVAr) |
1766 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1767 | Augmentation of LT Line |
1768 | Augmentation of LT Lines -1 phase to 3-phasewith 50 Sq. mm Rabbit conductor |
1769 | ACSR Rabbit Conductor 50 Sq. mm inclusive of sag and wastage |
1770 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1771 | Muffs with concerete filling |
1772 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1773 | Shackle Insulator (16 kN) |
1774 | D-Iron (U- Clamps) |
1775 | Earth Knob |
1776 | LT Stay Set |
1777 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1778 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1779 | Earthing Set complete |
1780 | Spool Tie |
1781 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1782 | Aluminium Paint |
1783 | Red Oxide |
1784 | Spiral PVC Spacer |
1785 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1786 | Augmentation of LT Lines -2 phase tothree phase with 50 Sq. mm Rabbit conductor |
1787 | ACSR Rabbit Conductor 50 Sq. mm inclusive of sag and wastage |
1788 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1789 | Muffs with concerete filling |
1790 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1791 | Shackle Insulator (16 kN) |
1792 | D-Iron (U- Clamps) |
1793 | Earth Knob |
1794 | LT Stay Set |
1795 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1796 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1797 | Earthing Set complete |
1798 | Spool Tie |
1799 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1800 | Aluminium Paint |
1801 | Red Oxide |
1802 | Spiral PVC Spacer |
1803 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1804 | Augmentation of LT Lines -1 phase tothree phase with 100 Sq. mm Dog conductor |
1805 | ACSR Dog Conductor 100 Sq. mm inclusive of sag and wastage |
1806 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1807 | Muffs with concerete filling |
1808 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1809 | Shackle Insulator (16 kN) |
1810 | D-Iron (U- Clamps) |
1811 | Earth Knob |
1812 | LT Stay Set |
1813 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1814 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1815 | Earthing Set complete |
1816 | Spool Tie |
1817 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1818 | Aluminium Paint |
1819 | Red Oxide |
1820 | Spiral PVC Spacer |
1821 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1822 | Reconductoring of LT Lines -ACSR 3 phase 4Wire with 50 Sq. mm Rabbit conductor |
1823 | ACSR 6/1/3.35 (50mm²) inclusive of sag and wastage |
1824 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1825 | Muffs with concerete filling |
1826 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1827 | Shackle Insulator (16 kN) |
1828 | D-Iron (U- Clamps) |
1829 | Earth Knob |
1830 | LT Stay Set |
1831 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1832 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1833 | Earthing Set complete |
1834 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1835 | Spool Tie |
1836 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1837 | Aluminium Paint |
1838 | Red Oxide |
1839 | Spiral PVC Spacer |
1840 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1841 | Reconductoring with Dog Conductor |
1842 | ACSR 6/1/4.72(100mm²) inclusive of sag and wastage |
1843 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1844 | Muffs with concerete filling |
1845 | Angle Iron (75x75x6) [Length- 1.50 Mtr + 0.02 Mtr] |
1846 | Shackle Insulator (16 kN) |
1847 | D-Iron (U- Clamps) |
1848 | Earth Knob |
1849 | LT Stay Set |
1850 | Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) |
1851 | Full Clamps [ 2 No for A.I + 1 No for Stay Set] |
1852 | Earthing Set complete |
1853 | Earth wire (GI, 8 SWG) {Additional 1% (Sag and wastage)} @ 0.102 kg/m |
1854 | Spool Tie |
1855 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1856 | Aluminium Paint |
1857 | Red Oxide |
1858 | Spiral PVC Spacer |
1859 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1860 | LT AB Cable on poles [Size: (3x120 Sq, mm ) +70sqmm (Insulated)+16 sqmm{Inclusive 3% sagging & wastage) |
1861 | LT AB Cable on poles [Size: (3x120 Sq, mm ) +70sqmm (Insulated) +16 sqmm{Inclusive 3% sagging & wastage) |
1862 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
1863 | Muffs with concerete filling |
1864 | Stay Set Complete |
1865 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
1866 | Full Clamp for stay |
1867 | Anchoring Assembly for LT |
1868 | Suspension Assembly for LT |
1869 | Facade Hooks for LT |
1870 | Distribution box 3 phase 5 connectors as per TS |
1871 | Piercing Connector as per TS |
1872 | Cable for SMDB 3.5Core X 35sqmm |
1873 | LT Earthing set complete (preferbly coil earthing) |
1874 | Red Oxide |
1875 | Aluminium paint |
1876 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1877 | Augmentation of HT Lines(11/22KV ) |
1878 | Augmentation of existing Line with 11Kv Dog Conductor of 100Sqm |
1879 | ACSR 6/1/4.72 (100mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
1880 | Steel Tubular Poles (11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1881 | Muffs with concerete filling |
1882 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 2 structure |
1883 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 2 structures |
1884 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1885 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1886 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1887 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1888 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1889 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1890 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
1891 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1892 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1893 | HT Earthing set complete (REC Constr. Stand. J-1) |
1894 | Eye Hook for earth wire |
1895 | Earth Wire Clamp |
1896 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1897 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1898 | Danger Plate (250X200X1.6 mm) |
1899 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1900 | Barbed Wire |
1901 | Red Oxide |
1902 | Aluminium Paint |
1903 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1904 | Augmentation of existing Line with 11Kv Raccon Conductor of 80Sqm |
1905 | ACSR 6/1/4.09MM (80mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
1906 | Steel Tubular Poles (11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1907 | Muffs with concerete filling |
1908 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 2 structure |
1909 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 2 structures |
1910 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1911 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1912 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1913 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1914 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1915 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1916 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
1917 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1918 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1919 | HT Earthing set complete (REC Constr. Stand. J-1) |
1920 | Eye Hook for earth wire |
1921 | Earth Wire Clamp |
1922 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1923 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1924 | Danger Plate (250X200X1.6 mm) |
1925 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1926 | Barbed Wire |
1927 | Red Oxide |
1928 | Aluminium Paint |
1929 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1930 | Augmentation of existing Line with 22Kv Rabbit Conductor of 50Sqm |
1931 | ACSR 6/1/3.35MM (50mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
1932 | Steel Tubular Poles (11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1933 | Muffs with concerete filling |
1934 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 2 structure |
1935 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 2 structures |
1936 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1937 | 22 kV Pin Insulators (Porcelain, 22 kV, 10 KN): 3 No per pole structure |
1938 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1939 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1940 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1941 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1942 | 22 kV Pin Insulators (Porcelain, 22 kV, 10 kN): 3 No per double pole structure |
1943 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1944 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1945 | HT Earthing set complete (REC Constr. Stand. J-1) |
1946 | Eye Hook for earth wire |
1947 | Earth Wire Clamp |
1948 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1949 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1950 | Danger Plate (250X200X1.6 mm) |
1951 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1952 | Barbed Wire |
1953 | Red Oxide |
1954 | Aluminium Paint |
1955 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1956 | Augmentation of existing Line with 11Kv Rabbit Conductor of 50Sqm |
1957 | ACSR 6/1/3.35MM (50mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
1958 | Steel Tubular Poles (11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
1959 | Muffs with concerete filling |
1960 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 2 structure |
1961 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 2 structures |
1962 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
1963 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure |
1964 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
1965 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
1966 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
1967 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
1968 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
1969 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
1970 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
1971 | HT Earthing set complete (REC Constr. Stand. J-1) |
1972 | Eye Hook for earth wire |
1973 | Earth Wire Clamp |
1974 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
1975 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
1976 | Danger Plate (250X200X1.6 mm) |
1977 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
1978 | Barbed Wire |
1979 | Red Oxide |
1980 | Aluminium Paint |
1981 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
1982 | Augmentation of HT Lines(33KV Line) |
1983 | Augmentation of existing line with 33KV AL-59 of 150sqmm |
1984 | AL-59 30/7/2.59 (150mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
1985 | Steel Tubular Poles (11 m, Working Load > 227 kg) (with Ruling Span 90 m, 10 No. Run thro" and 3 No. Dead End Structures) |
1986 | Muffs (2000mm) with concerete filling |
1987 | X-Arms: [MS Channel Iron C type (125X66X6) mm, Length: 3250 mm i/c tolerance 100 mm on either side] x 10 No. Structures |
1988 | Disc insulator String (Suspension) sets: 3 No. Discs in each string: ^^(Porcelain, CT, 12 kV, 90 kN) including dead end clamps etc)x (Single circuit : 3No conductors) x 1 No sides) /Run Throu" structures. |
1989 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
1990 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
1991 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
1992 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
1993 | X-Arm (Horizontal) - MS Channel Iron C type: (125x66x6 mm), Length: 3250 mm i/c tolerance 100 mm on either side x 2 No.] |
1994 | Discs insulator String sets on Dead End structures (comprising 3 No. Discs in each string: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps, Bend Stapples & straight Stapples etc.) x (3 No. conductors) x (2 No. sides) |
1995 | 33 kV Pin Insulators (Porcelain, 36 kV, 10 kN): 3 No per double pole structure |
1996 | Dead End Clamp L/S |
1997 | PG Clamp L/S |
1998 | Stay set complete in all respect (2 No./Run Thro & 8 No. / Dead End) |
1999 | Stay Wire (7/4.00 mm) (9.0 kg Per Stay Set) |
2000 | HT Earthing set complete |
2001 | Eye Hook for earth wire |
2002 | Earth Reel |
2003 | Half clamps: [On Double Pole Dead End structure: 6 No, Double Pole Run Thro" structure: 8 No] |
2004 | Full clamps: [On Double Pole Dead End structure: 4 No, Double Pole Run Thro" structure: 4 No] |
2005 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 20 mm F or more(with flat and spring washers)] |
2006 | Barbed wire |
2007 | Danger Plate (203X200X1.6mm) |
2008 | Red Oxide |
2009 | Aluminium Paint |
2010 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
2011 | New 33 KV LineWork |
2012 | New 33 KV Single Circuit Line with Dog Conductor on STP |
2013 | ACSR 6/1/4.72 (100mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
2014 | New 33 KV Single Circuit Line with Dog Conductor on 11 mtr STP |
2015 | Muffs with concerete filling |
2016 | X-Arms: [MS Channel Iron (100x50x6 mm, Length: 3250 mm i/c tolerance 100 mm on either side] x 10 No. Structures |
2017 | Disc insulator String (Suspension) sets: 3 No. Discs in each string: ^^(Porcelain, CT, 12 kV, 90 kN) including dead end clamps etc)x (Single circuit : 3No conductors) x 1 No sides) /Run Throu" structures. |
2018 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
2019 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
2020 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
2021 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
2022 | X-Arm (Horizontal) - MS Channel Iron: (100x50x6 mm), Length: 3250 mm i/c tolerance 100 mm on either side x 2 No.] |
2023 | Disc insulator String (Strain) sets: 3 No. Discs in each string: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (Single Circuit: 3 No. conductors) x (2 No. sides) /Dead Structures |
2024 | 33 kV Pin Insulators (Porcelain, 36 kV, 10 kN): 3 No per double pole structure |
2025 | Stay set complete in all respect (2 No./Run Thro & 4 No. / Dead End) |
2026 | Stay Wire (7/4.00 mm) (10 kg Per Stay Set) |
2027 | HT Earthing set complete |
2028 | Earth wire (GI, 6 SWG) {Includes Single wire length and Additional 1% (Sag and wastage)}@ 150 kg/km |
2029 | Eye Hook for earth wire |
2030 | Earth Reel |
2031 | MS Channel Iron: 75x40x6, Length :3300 mm |
2032 | Half clamps: [On Double Pole Dead End structure: 6 No, Double Pole Run Thro" structure: 8 No] |
2033 | Full clamps: [On Double Pole Dead End structure: 4 No, Double Pole Run Thro" structure: 4 No] |
2034 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 20 mm F or more(with flat and spring washers)] |
2035 | Barbed wire |
2036 | Danger Plate (203X200X1.6mm) |
2037 | Red Oxide |
2038 | Aluminium Paint |
2039 | New 33 KV Single Circuit Line with AL-59 Conductor 150 sq mm. on Tubular Pole |
2040 | AL-59 150 sq mm. ( Includes 3 Conductor lengths for 3 Phase and additional 1 % Wastage) |
2041 | New 33 KV Single Circuit Line with Dog Conductor on 13 mtr STP |
2042 | Muffs with concerete filling |
2043 | X-Arms: [MS Channel Iron (100x50x6 mm, Length: 3250 mm i/c tolerance 100 mm on either side] x 10 No. Structures |
2044 | Disc insulator String (Suspension) sets: 3 No. Discs in each string: ^^(Porcelain, CT, 12 kV, 90 kN) including dead end clamps etc)x (Single circuit : 3No conductors) x 1 No sides) /Run Throu" structures. |
2045 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
2046 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
2047 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
2048 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
2049 | X-Arm (Horizontal) - MS Channel Iron: (100x50x6 mm), Length: 3250 mm i/c tolerance 100 mm on either side x 2 No.] |
2050 | Disc insulator String (Strain) sets: 3 No. Discs in each string: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (Single Circuit: 3 No. conductors) x (2 No. sides) /Dead Structures |
2051 | 33 kV Pin Insulators (Porcelain, 36 kV, 10 kN): 3 No per double pole structure |
2052 | Stay set complete in all respect (2 No./Run Thro & 4 No. / Dead End) |
2053 | Stay Wire (7/4.00 mm) (10 kg Per Stay Set) |
2054 | HT Earthing set complete |
2055 | Earth wire (GI, 6 SWG) {Includes Single wire length and Additional 1% (Sag and wastage)}@ 150 kg/km |
2056 | Eye Hook for earth wire |
2057 | Earth Reel |
2058 | MS Channel Iron: 75x40x6, Length :3300 mm |
2059 | Half clamps: [On Double Pole Dead End structure: 6 No, Double Pole Run Thro" structure: 8 No] |
2060 | Full clamps: [On Double Pole Dead End structure: 4 No, Double Pole Run Thro" structure: 4 No] |
2061 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 20 mm F or more(with flat and spring washers)] |
2062 | Barbed wire |
2063 | Danger Plate (203X200X1.6mm) |
2064 | Red Oxide |
2065 | Aluminium Paint |
2066 | Cabling of 33kV line with 1x400 Sq. mm XLPE UG armoured Cable (3+1)(1.3CKM) |
2067 | 33 kV XLPE Cable [Size:1x400mm²) {additional 1% wastage)] |
2068 | 33 kV Cable Straight Through Jointing Kit [Size: 1x400 mm²] |
2069 | 33 kV Cable Indoor Termination Kit [Size: 1x400 mm²] |
2070 | 33 kV Cable Heat Shrink Outdoor Termination Kit [Size: 1x400mm²] |
2071 | RCC cable cover (2 feet Long) |
2072 | Sand Bag (50 Kg) |
2073 | Route and Joint indicating stone |
2074 | Inspection Chamber |
2075 | GI Pipe earthing 40 mm x 2.5/3 m "B" class |
2076 | Pipe HDPE of suitable size for 33KV XLPE 1X400 mm2 |
2077 | Lug AL Crimping 70 SQMM XLPE Single HOLE |
2078 | Flat GI Size 25x6 mm |
2079 | Cleat HDPE for Cable Support |
2080 | G.I. Pipe 100 mm DIA "B" CLASS |
2081 | Flat GI Size 50x6 mm |
2082 | Channel MS Size 75x40 mm |
2083 | Wiring tape (Printed PE UG utility Protection) |
2084 | Cabling of 33kV line with 1x95 Sq. mm XLPE UG armoured Cable (3+1)(0.5CKM) |
2085 | 33 kV XLPE Cable [Size:1x95mm²) {additional 1% wastage)] |
2086 | 33 kV Cable Straight Through Jointing Kit [Size: 1x95 mm²] |
2087 | 33 kV Cable Indoor Termination Kit [Size: 1x95 mm²] |
2088 | 33 kV Cable Heat Shrink Outdoor Termination Kit [Size: 1x95mm²] |
2089 | RCC cable cover (2 feet Long) |
2090 | Sand Bag (50 Kg) |
2091 | Route and Joint indicating stone |
2092 | Inspection Chamber |
2093 | GI Pipe earthing 40 mm x 2.5/3 m "B" class |
2094 | Pipe HDPE of suitable size for 33KV XLPE 1X95 mm2 |
2095 | Lug AL Crimping 70 SQMM XLPE Single HOLE |
2096 | Flat GI Size 25x6 mm |
2097 | Cleat HDPE for Cable Support |
2098 | G.I. Pipe 100 mm DIA "B" CLASS |
2099 | Flat GI Size 50x6 mm |
2100 | Channel MS Size 75x40 mm |
2101 | Wiring tape (Printed PE UG utility Protection) |
2102 | New 22kv Line works as per Scope of Work |
2103 | 22KV line -22kv line on Steel Tubular pole with Dog Conductor -100Sq. mm |
2104 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
2105 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
2106 | Muffs with concerete filling |
2107 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
2108 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
2109 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
2110 | 22 kV Pin Insulators with GI Pin(Porcelain, 22 kV, 10 KN): 3 No per pole structure |
2111 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
2112 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
2113 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
2114 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
2115 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
2116 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
2117 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
2118 | HT Earthing set complete (REC Constr. Stand. J-1) |
2119 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
2120 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
2121 | Eye Hook for earth wire |
2122 | Earth Wire Clamp |
2123 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
2124 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
2125 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
2126 | Danger Plate |
2127 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2128 | Barbed Wire |
2129 | Red Oxide |
2130 | Aluminium Paint |
2131 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
2132 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
2133 | New 22kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
2134 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
2135 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
2136 | Muffs with concerete filling |
2137 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
2138 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
2139 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
2140 | 22 kV Pin Insulators with GI Pin(Porcelain, 22 kV, 10 KN): 3 No per pole structure |
2141 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
2142 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
2143 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
2144 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
2145 | 22 kV Pin Insulators (Porcelain, 24 kV, 10 kN): 3 No per double pole structure |
2146 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
2147 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
2148 | HT Earthing set complete (REC Constr. Stand. J-1) |
2149 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
2150 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
2151 | Eye Hook for earth wire |
2152 | Earth Wire Clamp |
2153 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
2154 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
2155 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
2156 | Danger Plate |
2157 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2158 | Barbed Wire |
2159 | Red Oxide |
2160 | Aluminium Paint |
2161 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
2162 | GO AB Switch Unit (22kV, 400A, 25 KA ) Tripple pole O/D type |
2163 | 22kv HT XLPE Cable3x120 Sq. mm {Inclusive 3% sagging & wastage) |
2164 | 22kv HT XLPECable on poles [Size: (3x120 Sq, mm ) {Inclusive 3% sagging & wastage) |
2165 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
2166 | Muffs with concerete filling |
2167 | Stay Set Complete |
2168 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
2169 | Full Clamp for stay |
2170 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
2171 | Half Clamp for Cross Arm |
2172 | Anchoring Assembly for HT |
2173 | Suspension Assembly for HT |
2174 | Facade Hooks for HT |
2175 | Heat Shrinkable Straight Through Jointing Kit |
2176 | Cable Termination kit |
2177 | T-Jointing kit |
2178 | HT Earthing set complete (preferbly coil earthing) |
2179 | Red Oxide |
2180 | Aluminium paint |
2181 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
2182 | cable clamp made of GI sheet for 11kv 3x120 sq.mm |
2183 | 11kv HT XLPE Cable3x185 Sq. mm {Inclusive 3% sagging & wastage) |
2184 | 11 kv HT XLPECable on poles [Size: (3x185 Sqmm ) {Inclusive 3% sagging & wastage) |
2185 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
2186 | Muffs with concerete filling |
2187 | Stay Set Complete |
2188 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
2189 | Full Clamp for stay |
2190 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
2191 | Half Clamp for Cross Arm |
2192 | Anchoring Assembly for HT |
2193 | Suspension Assembly for HT |
2194 | Facade Hooks for HT |
2195 | Heat Shrinkable Straight Through Jointing Kit |
2196 | Cable Termination kit |
2197 | T-Jointing kit |
2198 | HT Earthing set complete (preferbly coil earthing) |
2199 | Red Oxide |
2200 | Aluminium paint |
2201 | steel catenary wire as per IS specification of 19 Strands & 7SWG type black 10mm |
2202 | cable clamp made of GI sheet for 11kv 3x185 sq.mm |
2203 | 11KV line -11kv line on Steel Tublar pole with Dog Conductor -100Sq. mm |
2204 | ACSR 6/1/4.72 {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
2205 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
2206 | Muffs with concerete filling |
2207 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
2208 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
2209 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
2210 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
2211 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
2212 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
2213 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
2214 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
2215 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure |
2216 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
2217 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
2218 | HT Earthing set complete (REC Constr. Stand. J-1) |
2219 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
2220 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
2221 | Eye Hook for earth wire |
2222 | Earth Wire Clamp |
2223 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
2224 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
2225 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
2226 | Danger Plate |
2227 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2228 | Barbed Wire |
2229 | Red Oxide |
2230 | Aluminium Paint |
2231 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
2232 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
2233 | New 11kv New Line on Steel Tubular Polewith Rabbit Conductor -50Sq. mm |
2234 | ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3F and Inclusive 3% (Sag, Jumpering and wastage} |
2235 | 11M Steel Tublar Pole(11 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro" and 3 No. Double Pole Dead End Structures) |
2236 | Muffs with concerete filling |
2237 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/ctolerance of 100 mm either side) x 8 structure |
2238 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
2239 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
2240 | 11 kV Pin Insulators with GI Pin(Porcelain, 12 kV, 10 KN): 3 No per pole structure |
2241 | Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. |
2242 | X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. |
2243 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ? Formation |
2244 | Discs insulator sets on Dead End structures (comprising 2 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) |
2245 | 11 kV Pin Insulators (Porcelain, 12. kV, 10 kN): 3 No per double pole structure |
2246 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
2247 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
2248 | HT Earthing set complete (REC Constr. Stand. J-1) |
2249 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
2250 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
2251 | Eye Hook for earth wire |
2252 | Earth Wire Clamp |
2253 | MS Channel Iron: 75x40x6, Length : 2400 mm for Road crossing |
2254 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro" structure: 2 No ] |
2255 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro" structure: 2 No] |
2256 | Danger Plate |
2257 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2258 | Barbed Wire |
2259 | Red Oxide |
2260 | Aluminium Paint |
2261 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
2262 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
2263 | 11kv HT AB Cable on poles [Size: (3x240 Sqmm ) {Inclusive 3% sagging & wastage) |
2264 | 11kv HT AB Cable on poles [Size: (3x240 Sqmm ) {Inclusive 3% sagging & wastage) |
2265 | Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
2266 | Muffs with concerete filling |
2267 | Stay Set Complete |
2268 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
2269 | Full Clamp for stay |
2270 | X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm] |
2271 | Half Clamp for Cross Arm |
2272 | Anchoring Assembly for HT |
2273 | Suspension Assembly for HT |
2274 | Facade Hooks for HT |
2275 | Heat Shrinkable Straight Through Jointing Kit |
2276 | Cable Termination kit |
2277 | T-Jointing kit |
2278 | HT Earthing set complete (preferbly coil earthing) |
2279 | Red Oxide |
2280 | Aluminium paint |
2281 | New33/11 KV Sub Station |
2282 | 1X1.6MVA (New PSS at Gulana Mandi Circle)(Total-1No.) |
2283 | Power Transformer (1.6 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2284 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2285 | 33 kV Switchgear & Allied Equipment |
2286 | a) 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2287 | b) 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2288 | c) 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2289 | d) 33 kV Isolator (1250 A, 25kA,with Earth Switch) (Moterised) |
2290 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2291 | f) 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2292 | g) 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2293 | h) 33 kV Potential Transformer (33 kV/110 V, 1F, Multi-Core, Outdoor), (1No. per F) |
2294 | i) 33 kV Drop Out Fuse Unit (33 kV, Expulsion) |
2295 | 11 kV Switchgear and Allied equipment: 01 No. incomer Bus |
2296 | a) 11 kV incomer Bus: Control and Relay (CR) Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] |
2297 | b) 11 kV Incomer Bus: Potential Transformer (11 kV/110V, 3F, Indoor) |
2298 | c) 11 kV LA/ Surge Arrester (9 KV, 10 kA ,Station Class, ZnO, Porcelain, Outdoor) |
2299 | d) 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m}+Spare |
2300 | e) 11 kV Cable Termination Kit (185 mm², Outdoor) |
2301 | f) 11 kV Cable Termination Kit (185mm², Indoor) |
2302 | 11 kV Switchgear and Allied equipment: Single (2 No.) Outgoing Feeder |
2303 | a) 11 kV Outgoing Feeder: Control and Relay (CR) Panel with indoor VCB (12 kV, 1250 A, 25KA) including CT |
2304 | b) 11 kV Isolator (12 kV, 1250 A, 25 kA,with Earth Switch, Outdoor) |
2305 | c) 11 kV LA/ Surge Arrester (9 kV, 10 kA Station Class, ZnO, Porcelain, Outdoor) |
2306 | d) 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Busbar VCB to Isolator}{50m+ Spare- 50m} |
2307 | e) 11 kV Cable Termination Kit (185 mm², Outdoor) |
2308 | f) 11 kV Cable Termination Kit (185 mm², Indoor) |
2309 | LT Cable (1.1 kV, 3.5 Core, 70 mm2) {from Station Tfr} |
2310 | Capacitor Bank (3-?, 50 Hz, 1200 KVAr) [ IS:2834 ] |
2311 | Automatic Capacitor Switch (12 kV, 1250 A, 25 kA) [REC Spec. 20/1981] |
2312 | Battery Bank with DualFCBC Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 200 AH) |
2313 | Distribution Panel (30V, DC) |
2314 | Distribution Panel (415 V, AC)Distribution Panel (415 V, AC) 200 Amp as incomerMCCB & 6 Nos 63 Amp MCCB as outgoing with voltmeter and Ammeter of 0.5 accuracy class alongwith phase indicating lamps of accuracy class 0.5 |
2315 | Super Strcture and Bus Bar Arrangement |
2316 | (i) R.S. Joists, size 12800x250x125 mm 8 supports |
2317 | (ii) R.S.Joists, size 4200x250x125 mm supports for Power Transformer"s LA, Station Transformer LA, I/C, Power Transformer"s CTs |
2318 | (iii) M.S. channel iron 125x65 mm, X-arm @13.1 kg/m at 5% wastage for Bus-bar,Isolators,CT, LA"s transformer etc. =100 |
2319 | (iv) M.S. angle iron 65x65 X-arm @ 5.8 kg/m & 5% wastage for body supports belt of Station transformer including 5% wastage |
2320 | (v) Nuts & Bolts with Washers off sizes |
2321 | BUS-BAR |
2322 | (i) 3 Disc insulators Tension String complete with fitting |
2323 | (ii) ACSR conductor 200 mm² at 10 % wastage |
2324 | For jumpers at 2 m average 15 nos I.e. |
2325 | (iii) Tee connections |
2326 | (iv) PG clamps |
2327 | Gantry for 2 no. outgoing feeder |
2328 | (a) Steel tubular pole 11 m long for 1 No. out going Feeder |
2329 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2330 | (a)4.2 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (11Kv) |
2331 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2332 | (d) M.S. Half clamps |
2333 | (e) Full Clamp |
2334 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2335 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2336 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2337 | Clamps for 1 Nos. out going Feeder |
2338 | 11 kV Isolator |
2339 | Earthing of 33/11KV Substation |
2340 | Earthing of 33 kV yard & equipment & 22 kV or 11kV panels M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:- (a) Transformer Earthing at 3 points for 2 Nos Power Transformers (body & neutral) at 10 Mtr each 2X(3x10)x1.05=63 Mtr (b) For 4 No. LA"s at 4.2 Mtr each 2X4.2x2x1.05=17.64 Mtr (c) For 22 nos. 33 kV super structure at 11.50 Mtr each 22x11.50x1.05 =265.65 Mtr i.e. 266 Mtr (d) For 32 Nos. VCB & CT body earthing at 10 m Each (32x10)x1.05 = 336 Mtr Total =682 mtr. i.e. 682X 2.4= 1638 ie 1.638 MT |
2341 | GI Wire 6 No. SWG for screening etc. |
2342 | Eye Block for screening |
2343 | Tumbuckle for screening |
2344 | GI Pipe 50 mm dia with holes of 16mm dia at 150 mm for centre to centre for 2 m distance from bottomFor Transformer and for 11KV panels and fencing and Fixing of GI pipe 50mm with earth pit10 nos per PSS Providing Coal=125 kg,Charcoal 23 kg ,Salt 122 kg,Sand 84 kg in each Earth Pit(Earth Pit Material) |
2345 | MS plates 150x150x6mm for two connection |
2346 | 50x6 mm MS Flat connection with the mat to mat |
2347 | Nut and bolts galvanized various sizes |
2348 | Chequered plate cover 500x500x6mm i.e.11.8Kg |
2349 | MS Rod 20 mm round 3 mtr long and weighing 2.47 kg/m and digging of 3 meter pits for earth rods 20 mm dia |
2350 | Yard Lighting:-a) 9 m, Steel Tubular poles for yard lighting |
2351 | b)18 W LED Lamp complete with fittings |
2352 | c)Post Erection for gate |
2353 | d)Clamps for GI pipe bracket |
2354 | e)Underground cable 16 mm² for yard lighting |
2355 | f)PVC cable size 6 mm² for connecting LED lamp supply |
2356 | g)Junction box i/c MCCB and other allied |
2357 | Lighting Emergency (3 No LED Bulbs with holders / wire) |
2358 | control cable: 2x2.5 mm² |
2359 | control cable: 4x2.5 mm² |
2360 | control cable:12x2.5 mm² |
2361 | 3.5 core 95 mm² aluminium cable suitable for 415 V, AC |
2362 | Fire Fighting Equipmentsas per TS |
2363 | Safety Equipments & T & P as per TS |
2364 | CIVIL WORKS |
2365 | Control Room one Storey Building Sizes(14.7x14.8)sqm as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33202/2018 |
2366 | water supply and sanitary installation for Control Room Building. |
2367 | Electrical Installation for control room building (for 60 points) |
2368 | Septic Tank (1 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33254/2020 |
2369 | Rain Water Harvesting Tank (1 No per PSS) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33249/2020 |
2370 | Power Transformers Foundation suitable for upto 3.15 MVA (1 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33239/2020 |
2371 | Substation Transformer Foundation (1 No) |
2372 | VCB Foundation (2 Nos) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33241/2020 |
2373 | Foundation of R.S. Joist supports (8 Nos) as per drawing of HPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33243/2020 |
2374 | Foundation of CT, PT & LA(6 Nos) as per drawing ofHPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33242/2020 |
2375 | Outdoor Cable Trench ( 80 mtr Per PSS) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33245/2020 |
2376 | Indoor Cable Trench ( 30 mtr trench per PSS) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33247-48/2020 |
2377 | Cost Of Boundary Wall (200Meter/Pss)as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33251-52/2020 |
2378 | Main Gate & Sub-Station Yard Gate(1 Nos) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33253/2020 |
2379 | Spreading of gravells/ Shingles in yard (30CUM ) as per drawing of HPSEBL/SEDES/SSD-478/2021-22-7972-79/2021 |
2380 | Formation of drainage system around the substation around 60x40mtr yard (200 Meter) as per drawing of |
2381 | Firewall Protection as per drawing HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33244/2020 |
2382 | Chain Link Fencing with wooven mesh of GI wire 15MX30M |
2383 | Cost of Soil Testing & Contour plans & design |
2384 | Site Development at Gulana New PSS Mandi |
2385 | Earth work in excavation in all kind of soils by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m or filling the selected earth behind retaining walls or under floors complete all as directed by engineer-in-charge |
2386 | Earth work in excavation in all kind of soils by mechanical means (hydraulic excavator)/manual means in foundation trenches or drainsincluding dressing of sides and ramming of bottomsgetting out and disposal of excavated earth lead upto 50m and lift upto 1.5m or filling the selected earth behind retaining walls or under floors complete all as directed by Engineer-in-charge |
2387 | Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering work upto plinth level in 1:5:10 (1 cement : 5 Sand : 10 graded stone aggregate 40mm nominal size) complete all as specified and as directed by Engineer-in-charge. |
2388 | Providing and laying cemengt concrete 1:3:6 (1 cement :3 Coarse sand : 6 graded stone aggregate 20mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,, buttresses, string or lacing courses, parapets coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc, upto floor fivelevel, excluding the cost of centering, shuttering and finishing complete all as specified and as directed by Engineer-in-charge. |
2389 | Providingcentering and shutteringformwork with steel plates giving fair finish including strutting, propping etc and removal of form work for retaining walls, return walls, walls (any thickness) including attachaed pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc |
2390 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed 75mm dia conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion. |
2391 | Supply, filling dry hand packing tightly boulders of size 5cm to 20cm in required thickness for all leads and lifts, all complete as per direction of Engineer-in-charge |
2392 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
2393 | New33/11 KV Sub Station |
2394 | 1X3.15MVA (Thachi & Gushaini in Kullu Circle )Total =2Nos |
2395 | Power Transformer (3.15 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2396 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2397 | 33 kV Switchgear & Allied Equipment |
2398 | a) 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2399 | b) 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2400 | c) 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2401 | d) 33 kV Isolator (1250 A, 25kA,with Earth Switch) (Moterised) |
2402 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2403 | f) 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2404 | g) 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2405 | h) 33 kV Potential Transformer (33 kV/110 V, 1F, Multi-Core, Outdoor), (1No. per F) |
2406 | i) 33 kV Drop Out Fuse Unit (33 kV, Expulsion) |
2407 | 11 kV Switchgear and Allied equipment: 01 No. incomer Bus |
2408 | a) 11 kV incomer Bus: Control and Relay (CR) Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] |
2409 | b) 11 kV Incomer Bus: Potential Transformer (11 kV/110V, 3F, Indoor) |
2410 | c) 11 kV LA/ Surge Arrester (9 KV, 10 kA ,Station Class, ZnO, Porcelain, Outdoor) |
2411 | d) 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m}+Spare |
2412 | e) 11 kV Cable Termination Kit (400 mm², Outdoor) |
2413 | f) 11 kV Cable Termination Kit (400 mm², Indoor) |
2414 | 11 kV Switchgear and Allied equipment: Single (2 No.) Outgoing Feeder |
2415 | a) 11 kV Outgoing Feeder: Control and Relay (CR) Panel with indoor VCB (12 kV, 1250 A, 25KA) including CT |
2416 | b) 11 kV Isolator (12 kV, 1250 A, 25 kA,with Earth Switch, Outdoor) |
2417 | c) 11 kV LA/ Surge Arrester (9 kV, 10 kA Station Class, ZnO, Porcelain, Outdoor) |
2418 | d) 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Busbar VCB to Isolator}{50m+ Spare- 50m} |
2419 | e) 11 kV Cable Termination Kit (185 mm², Outdoor) |
2420 | f) 11 kV Cable Termination Kit (185 mm², Indoor) |
2421 | LT Cable (1.1 kV, 3.5 Core, 70 mm2) {from Station Tfr} |
2422 | Capacitor Bank (3-?, 50 Hz, 1200 KVAr) [ IS:2834 ] |
2423 | Automatic Capacitor Switch (12 kV, 1250 A, 25 kA) [REC Spec. 20/1981] |
2424 | Battery Bank with DualFCBC Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 200 AH) |
2425 | Distribution Panel (30V, DC) |
2426 | Distribution Panel (415 V, AC)Distribution Panel (415 V, AC) 200 Amp as incomerMCCB & 6 Nos 63 Amp MCCB as outgoing with voltmeter and Ammeter of 0.5 accuracy class alongwith phase indicating lamps of accuracy class 0.5 |
2427 | Super Strcture and Bus Bar Arrangement |
2428 | (i) R.S. Joists, size 12800x250x125 mm 8 supports |
2429 | (ii) R.S.Joists, size 4200x250x125 mm supports for Power Transformer"s LA, Station Transformer LA, I/C, Power Transformer"s CTs |
2430 | (iii) M.S. channel iron 125x65 mm, X-arm @13.1 kg/m at 5% wastage for Bus-bar,Isolators,CT, LA"s transformer etc. =100 |
2431 | (iv) M.S. angle iron 65x65 X-arm @ 5.8 kg/m & 5% wastage for body supports belt of Station transformer including 5% wastage |
2432 | (v) Nuts & Bolts with Washers off sizes |
2433 | BUS-BAR |
2434 | (i) 3 Disc insulators Tension String complete with fitting |
2435 | (ii) ACSR conductor 200 mm² at 10 % wastage |
2436 | For jumpers at 2 m average 15 nos I.e. |
2437 | (iii) Tee connections |
2438 | (iv) PG clamps |
2439 | Gantry for 2 no. outgoing feeder |
2440 | (a) Steel tubular pole 11 m long for 1 No. out going Feeder |
2441 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2442 | (a)4.2 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (11Kv) |
2443 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2444 | (d) M.S. Half clamps |
2445 | (e) Full Clamp |
2446 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2447 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2448 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2449 | Clamps for 1 Nos. out going Feeder |
2450 | 11 kV Isolator |
2451 | Cost of Earthing |
2452 | Earthing of 33/11KV Substation |
2453 | Earthing of 33 kV yard & equipment & 22 kV or 11kV panels M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:- (a) Transformer Earthing at 3 points for 2 Nos Power Transformers (body & neutral) at 10 Mtr each 2X(3x10)x1.05=63 Mtr (b) For 4 No. LA"s at 4.2 Mtr each 2X4.2x2x1.05=17.64 Mtr (c) For 22 nos. 33 kV super structure at 11.50 Mtr each 22x11.50x1.05 =265.65 Mtr i.e. 266 Mtr (d) For 32 Nos. VCB & CT body earthing at 10 m Each (32x10)x1.05 = 336 Mtr Total =682 mtr. i.e. 682X 2.4= 1638 ie 1.638 MT |
2454 | GI Wire 6 No. SWG for screening etc. |
2455 | Eye Block for screening |
2456 | Tumbuckle for screening |
2457 | GI Pipe 50 mm dia with holes of 16mm dia at 150 mm for centre to centre for 2 m distance from bottomFor Transformer and for 11KV panels and fencing and Fixing of GI pipe 50mm with earth pit10 nos per PSS Providing Coal=125 kg,Charcoal 23 kg ,Salt 122 kg,Sand 84 kg in each Earth Pit(Earth Pit Material) |
2458 | MS plates 150x150x6mm for two connection |
2459 | 50x6 mm MS Flat connection with the mat to mat |
2460 | Nut and bolts galvanized various sizes |
2461 | Chequered plate cover 500x500x6mm i.e.11.8Kg |
2462 | MS Rod 20 mm round 3 mtr long and weighing 2.47 kg/m and digging of 3 meter pits for earth rods 20 mm dia |
2463 | i) Cost of Material for Earth Mat laying |
2464 | ii) Earthing of 33 kV yard & equipment & 22 kV or 11kV panels M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:- (a) Transformer Earthing at 3 points (body & neutral) at 10 Mtr each (3x10)x1.05=31.5 Mtr (b) For 2 No. LA"s at 4.2 Mtr each 4.2x2x1.05=8.82 Mtr (c) For 15 nos. 33 kV super structure at 11.50 Mtr each 15x11.50x1.05 =173.25 Mtr i.e. 173 Mtr (d) For 12 Nos. VCB & CT body earthing at 10 m Each (12x10)x1.05 = 126 Mtr Total (a+b+c+d) =339.57 m i.e. 340 Mtr and 5% welding of riser and corrosion protection .816 Mt +5% of .816 MT= 857 |
2465 | iii) GI wire no. 6 SWG for screening etc. |
2466 | iv) Eye block for screening |
2467 | v) Turnbuckle for Screening |
2468 | Yard Lighting:-a) 9 m, Steel Tubular poles for yard lighting |
2469 | b)18 W LED Lamp complete with fittings |
2470 | c)Post Erection for gate |
2471 | d)Clamps for GI pipe bracket |
2472 | e)Underground cable 16 mm² for yard lighting |
2473 | f)PVC cable size 6 mm² for connecting LED lamp supply |
2474 | g)Junction box i/c MCCB and other allied |
2475 | Lighting Emergency (3 No LED Bulbs with holders / wire) |
2476 | control cable: 2x2.5 mm² |
2477 | control cable: 4x2.5 mm² |
2478 | control cable:12x2.5 mm² |
2479 | 3.5 core 95 mm² aluminium cable suitable for 415 V, AC |
2480 | Fire Fighting Equipmentsas per TS |
2481 | Safety Equipments & T & P as per TS |
2482 | Civil Works |
2483 | Control Room one Storey Building Sizes(14.7x14.8)sqm as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33202/2018 |
2484 | water supply and sanitary installation for Control Room Building. |
2485 | Electrical Installation for control room building (for 60 points) |
2486 | Septic Tank (1 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33254/2020 |
2487 | Rain Water Harvesting Tank (1 No per PSS) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33249/2020 |
2488 | Power Transformers Foundation suitable for upto 3.15 MVA (2 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33239/2020 |
2489 | Substation Transformer Foundation (1 No) |
2490 | VCB Foundation (5 Nos) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33241/2020 |
2491 | Foundation of R.S. Joist supports (16 Nos) as per drawing of HPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33243/2020 |
2492 | Foundation of CT, PT & LA(14Nos) as per drawing ofHPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33242/2020 |
2493 | Outdoor Cable Trench ( 80 mtr Per PSS) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33245/2020 |
2494 | Indoor Cable Trench ( 30 mtr trench per PSS) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33247-48/2020 |
2495 | Cost Of Boundary Wall (200Meter/Pss)as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33251-52/2020 |
2496 | Main Gate & Sub-Station Yard Gate(1 Nos) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33253/2020 |
2497 | Spreading of gravells/ Shingles in yard (30CUM ) as per drawing of HPSEBL/SEDES/SSD-478/2021-22-7972-79/2021 |
2498 | Formation of drainage system around the substation around 60x40mtr yard (200 Meter) as per drawing of |
2499 | Firewall Protection as per drawing HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33244/2020 |
2500 | Chain Link Fencing with wooven mesh of GI wire 15MX30M |
2501 | Cost of Soil Testing & Contour plans & design |
2502 | Development of Site and approach road for proposed 33/11 KV Sub-Station at Thachi under Electrical sub Division HPSEBL Balichowki. |
2503 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.ordinary rock (all kind of soil) |
2504 | Carriage of Earth work upto a lead of 10 km by mechanical means. |
2505 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size). |
2506 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:- 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
2507 | Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
2508 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
2509 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes for weep holes in fire protection wall complete in all respect.75 mm diameter. |
2510 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. |
2511 | Development of Site for proposed 33/11 KV, 2X1.60 MVA Sub-Station at Gushaini under Electrical Division HPSEBL Banjar. |
2512 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Hard rock (blasting prohibited). |
2513 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size). |
2514 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars. |
2515 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) . |
2516 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size). |
2517 | Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
2518 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
2519 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
2520 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m :all kind of soil. |
2521 | Preparation and consolidation of sub grade with power road roller of 8 to 12 Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100mm with tolerance of ± 2%) Zinic+PVC coated, Mesh wire diameter 2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-in-charge |
2522 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes for weep holes in fire protection wall complete in all respect.75 mm diameter. |
2523 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
2524 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
2525 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. |
2526 | New33/11 KV Sub Station |
2527 | 2X3.15 MVA (PSS Jhaniyara in Hamirpur Circle,Nerchowk in Bilaspur) Total = 2 nos |
2528 | Power Transformer (3.15 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2529 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2530 | 33 kV Switchgear & Allied Equipment |
2531 | a) 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2532 | b) 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2533 | c) 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2534 | d) 33 kV Isolator (1250 A, 25kA,with Earth Switch) (Moterised) |
2535 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2536 | f) 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2537 | g) 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2538 | h) 33 kV Potential Transformer (33 kV/110 V, 1F, Multi-Core, Outdoor), (1No. per F) |
2539 | i) 33 kV Drop Out Fuse Unit (33 kV, Expulsion) |
2540 | 11 kV Switchgear and Allied equipment: 02 No. incomer Bus |
2541 | a) 11 kV incomer Bus: Control and Relay (CR) Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] |
2542 | b) 11 kV Incomer Bus: Potential Transformer (11 kV/110V, 3F, Indoor) |
2543 | c) 11 kV LA/ Surge Arrester (9 KV, 10 kA ,Station Class, ZnO, Porcelain, Outdoor) |
2544 | d) 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m}+Spare |
2545 | e) 11 kV Cable Termination Kit (400 mm², Outdoor) |
2546 | f) 11 kV Cable Termination Kit (400 mm², Indoor) |
2547 | 11 kV Switchgear and Allied equipment: Single (8 No.) Outgoing Feeder |
2548 | a) 11 kV Outgoing Feeder: Control and Relay (CR) Panel with indoor VCB (12 kV, 1250 A, 25KA) including CT |
2549 | c) 11 kV LA/ Surge Arrester (9 kV, 10 kA Station Class, ZnO, Porcelain, Outdoor) |
2550 | d) 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Busbar VCB to Isolator}{50m+ Spare- 50m} |
2551 | e) 11 kV Cable Termination Kit (185 mm², Outdoor) |
2552 | f) 11 kV Cable Termination Kit (185 mm², Indoor) |
2553 | LT Cable (1.1 kV, 3.5 Core, 70 mm2) {from Station Tfr} |
2554 | Capacitor Bank (3-?, 50 Hz, 1200 KVAr) [ IS:2834 ] |
2555 | Automatic Capacitor Switch (12 kV, 1250 A, 25 kA) [REC Spec. 20/1981] |
2556 | Battery Bank with DualFCBC Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 200 AH) |
2557 | Distribution Panel (30V, DC) |
2558 | Distribution Panel (415 V, AC)Distribution Panel (415 V, AC) 200 Amp as incomerMCCB & 6 Nos 63 Amp MCCB as outgoing with voltmeter and Ammeter of 0.5 accuracy class alongwith phase indicating lamps of accuracy class 0.5 |
2559 | Super Strcture and Bus Bar Arrangement |
2560 | (i) R.S. Joists, size 12800x250x125 mm 16 supports |
2561 | (ii) R.S.Joists, size 4200x250x125 mm supports for Power Transformer"s LA, Station Transformer LA, I/C, Power Transformer"s CTs |
2562 | (iii) M.S. channel iron 125x65 mm, X-arm @13.1 kg/m at 5% wastage for Bus-bar,Isolators,CT, LA"s transformer etc. |
2563 | (iv) M.S. angle iron 65x65 X-arm @ 5.8 kg/m & 5% wastage for body supports belt of Station transformer including 5% wastage |
2564 | (v) Nuts & Bolts with Washers off sizes |
2565 | BUS-BAR |
2566 | (i) 3 Disc insulators Tension String complete with fitting |
2567 | (ii) ACSR conductor 200 mm² at 10 % wastage |
2568 | For jumpers at 2 m average 30 nos I.e. |
2569 | (iii) Tee connections |
2570 | (iv) PG clamps |
2571 | Gantry FOR 33 kV |
2572 | (a) Steel tubular pole 11 m long |
2573 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2574 | (a)5.5 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (33kV) |
2575 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2576 | (d) M.S. Half clamps |
2577 | (e) Full Clamp |
2578 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2579 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2580 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2581 | Clamps for 1 Nos. out going Feeder |
2582 | 33 kV Isolator Moterised with ES |
2583 | Gantry for 8 no. outgoing feeder |
2584 | (a) Steel tubular pole 11 m long for 8 No. out going Feeder |
2585 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2586 | (a)4.2 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (11Kv) |
2587 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2588 | (d) M.S. Half clamps |
2589 | (e) Full Clamp |
2590 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2591 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2592 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2593 | Clamps forout going Feeder |
2594 | 11 kV Isolator |
2595 | Earthing of 33/11KV Substation |
2596 | Earthing of 33 kV yard & equipment & 22 kV or 11kV panels M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:- (a) Transformer Earthing at 3 points for 2 Nos Power Transformers (body & neutral) at 10 Mtr each 2X(3x10)x1.05=63 Mtr (b) For 4 No. LA"s at 4.2 Mtr each 2X4.2x2x1.05=17.64 Mtr (c) For 22 nos. 33 kV super structure at 11.50 Mtr each 22x11.50x1.05 =265.65 Mtr i.e. 266 Mtr (d) For 32 Nos. VCB & CT body earthing at 10 m Each (32x10)x1.05 = 336 Mtr Total =682 mtr. i.e. 682X 2.4= 1638 ie 1.638 MT |
2597 | GI Wire 6 No. SWG for screening etc. |
2598 | Eye Block for screening |
2599 | Tumbuckle for screening |
2600 | GI Pipe 50 mm dia with holes of 16mm dia at 150 mm for centre to centre for 2 m distance from bottomFor Transformer and for 11KV panels and fencing and Fixing of GI pipe 50mm with earth pit10 nos per PSS Providing Coal=125 kg,Charcoal 23 kg ,Salt 122 kg,Sand 84 kg in each Earth Pit(Earth Pit Material) |
2601 | MS plates 150x150x6mm for two connection |
2602 | 50x6 mm MS Flat connection with the mat to mat |
2603 | Nut and bolts galvanized various sizes |
2604 | Chequered plate cover 500x500x6mm i.e.11.8Kg |
2605 | MS Rod 20 mm round 3 mtr long and weighing 2.47 kg/m and digging of 3 meter pits for earth rods 20 mm dia |
2606 | Yard Lighting:-a) 9 m, Steel Tubular poles for yard lighting |
2607 | b)18 W LED Lamp complete with fittings |
2608 | c)Post Erection for gate |
2609 | d)Clamps for GI pipe bracket |
2610 | e)Underground cable 16 mm² for yard lighting |
2611 | f)PVC cable size 6 mm² for connecting LED lamp supply |
2612 | g)Junction box i/c MCCB and other allied |
2613 | Lighting Emergency (3 No LED Bulbs with holders / wire) |
2614 | control cable: 2x2.5 mm² |
2615 | control cable: 4x2.5 mm² |
2616 | control cable:12x2.5 mm² |
2617 | 3.5 core 95 mm² aluminium cable suitable for 415 V, AC |
2618 | Fire Fighting Equipmentsas per TS |
2619 | Safety Equipments & T & P as per TS |
2620 | CIVIL WORKS |
2621 | Control Room one Storey Building Sizes(14.7x14.8)sqm as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33202/2018 |
2622 | water supply and sanitary installation for Control Room Building. |
2623 | Electrical Installation for control room building (for 60 points) |
2624 | Septic Tank (1 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33254/2020 |
2625 | Rain Water Harvesting Tank (1 No per PSS) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33249/2020 |
2626 | Power Transformers Foundation suitable for upto 3.15 MVA (2 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33239/2020 |
2627 | Substation Transformer Foundation (1 No) |
2628 | VCB Foundation (5 Nos) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33241/2020 |
2629 | Foundation of R.S. Joist supports (16 Nos) as per drawing of HPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33243/2020 |
2630 | Foundation of CT, PT & LA(14Nos) as per drawing ofHPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33242/2020 |
2631 | Outdoor Cable Trench ( 80 mtr Per PSS) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33245/2020 |
2632 | Indoor Cable Trench ( 30 mtr trench per PSS) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33247-48/2020 |
2633 | Cost Of Boundary Wall (200Meter/Pss)as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33251-52/2020 |
2634 | Main Gate & Sub-Station Yard Gate(1 Nos) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33253/2020 |
2635 | Spreading of gravells/ Shingles in yard (30CUM ) as per drawing of HPSEBL/SEDES/SSD-478/2021-22-7972-79/2021 |
2636 | Formation of drainage system around the substation around 60x40mtr yard (200 Meter) as per drawing of |
2637 | Firewall Protection as per drawing HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33244/2020 |
2638 | Chain Link Fencing with wooven mesh of GI wire 15MX30M |
2639 | Cost of Soil Testing & Contour plans & design |
2640 | Site Development at 33/11 KV Sub-Station at Jhaniyara under Electrical Division, HPSEBL-Hamirpur for RDSS Scheme |
2641 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
2642 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kind of soils |
2643 | Carriage of excavated earth by mechanical means for disposal in the dumping area for a lead of 5 Km |
2644 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
2645 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) |
2646 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
2647 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size). |
2648 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in flooring , in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
2649 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
2650 | Site Development at33/11KV Nerchowk at Bilaspur circle |
2651 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of .foundation etc. complete. |
2652 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
2653 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 gradedstone aggregate 20 mm nominal size |
2654 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts |
2655 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) |
2656 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
2657 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
2658 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm |
2659 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm |
2660 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
2661 | New33/11 KV Sub Station |
2662 | 2X6.3 MVA (Mahoul at kullu Circle, Total No:-1) |
2663 | Power Transformer (6.3 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2664 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2665 | 33 kV Switchgear & Allied Equipment |
2666 | a) 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2667 | b) 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2668 | c) 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2669 | d) 33 kV Isolator (1250 A, 25kA,with Earth Switch) (Moterised) |
2670 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2671 | f) 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2672 | g) 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2673 | h) 33 kV Potential Transformer (33 kV/110 V, 1F, Multi-Core, Outdoor), (1No. per F) |
2674 | i) 33 kV Drop Out Fuse Unit (33 kV, Expulsion) |
2675 | 11 kV Switchgear and Allied equipment: 02 No. incomer Bus |
2676 | a) 11 kV incomer Bus: Control and Relay (CR) Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] |
2677 | b) 11 kV Incomer Bus: Potential Transformer (11 kV/110V, 3F, Indoor) |
2678 | c) 11 kV LA/ Surge Arrester (9 KV, 10 kA ,Station Class, ZnO, Porcelain, Outdoor) |
2679 | d) 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m}+Spare |
2680 | e) 11 kV Cable Termination Kit (400 mm², Outdoor) |
2681 | f) 11 kV Cable Termination Kit (400 mm², Indoor) |
2682 | 11 kV Switchgear and Allied equipment: Single (8 No.) Outgoing Feeder |
2683 | a) 11 kV Outgoing Feeder: Control and Relay (CR) Panel with indoor VCB (12 kV, 1250 A, 25KA) including CT |
2684 | c) 11 kV LA/ Surge Arrester (9 kV, 10 kA Station Class, ZnO, Porcelain, Outdoor) |
2685 | d) 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Busbar VCB to Isolator}{50m+ Spare- 50m} |
2686 | e) 11 kV Cable Termination Kit (185 mm², Outdoor) |
2687 | f) 11 kV Cable Termination Kit (185 mm², Indoor) |
2688 | LT Cable (1.1 kV, 3.5 Core, 70 mm2) {from Station Tfr} |
2689 | Capacitor Bank (3-?, 50 Hz, 1800 KVAr) [ IS:2834 ] |
2690 | Automatic Capacitor Switch (12 kV, 1250 A, 25 kA) [REC Spec. 20/1981] |
2691 | Battery Bank with Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 200 AH) |
2692 | Distribution Panel (30V, DC) |
2693 | Distribution Panel (415 V, AC)Distribution Panel (415 V, AC) 200 Amp as incomerMCCB & 6 Nos 63 Amp MCCB as outgoing with voltmeter and Ammeter of 0.5 accuracy class alongwith phase indicating lamps of accuracy class 0.5 |
2694 | Super Strcture and Bus Bar Arrangement |
2695 | (i) R.S. Joists, size 12800x250x125 mm 16 supports |
2696 | (ii) R.S.Joists, size 4200x250x125 mm supports for Power Transformer"s LA, Station Transformer LA, I/C, Power Transformer"s CTs |
2697 | (iii) M.S. channel iron 125x65 mm, X-arm @13.1 kg/m at 5% wastage for Bus-bar,Isolators,CT, LA"s transformer etc. |
2698 | (iv) M.S. angle iron 65x65 X-arm @ 5.8 kg/m & 5% wastage for body supports belt of Station transformer including 5% wastage |
2699 | (v) Nuts & Bolts with Washers off sizes |
2700 | BUS-BAR |
2701 | (i) 3 Disc insulators Tension String complete with fitting |
2702 | (ii) ACSR conductor 200 mm² at 10 % wastage |
2703 | For jumpers at 2 m average 30 nos I.e. |
2704 | (iii) Tee connections |
2705 | (iv) PG clamps |
2706 | Gantry FOR 33 kV |
2707 | (a) Steel tubular pole 11 m long |
2708 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2709 | (a)5.5 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (33kV) |
2710 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2711 | (d) M.S. Half clamps |
2712 | (e) Full Clamp |
2713 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2714 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2715 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2716 | Clamps for 1 Nos. out going Feeder |
2717 | 33 kV Isolator Moterised with ES |
2718 | Gantry for 8 no. outgoing feeder |
2719 | (a) Steel tubular pole 11 m long for 8 No. out going Feeder |
2720 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2721 | (a)4.2 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (11Kv) |
2722 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2723 | (d) M.S. Half clamps |
2724 | (e) Full Clamp |
2725 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2726 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2727 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2728 | Clamps forout going Feeder |
2729 | 11 kV Isolator |
2730 | Cost of Earthing |
2731 | Earthing of 33/11KV Substation |
2732 | Earthing of 33 kV yard & equipment & 22 kV or 11kV panels M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:- (a) Transformer Earthing at 3 points for 2 Nos Power Transformers (body & neutral) at 10 Mtr each 2X(3x10)x1.05=63 Mtr (b) For 4 No. LA"s at 4.2 Mtr each 2X4.2x2x1.05=17.64 Mtr (c) For 22 nos. 33 kV super structure at 11.50 Mtr each 22x11.50x1.05 =265.65 Mtr i.e. 266 Mtr (d) For 32 Nos. VCB & CT body earthing at 10 m Each (32x10)x1.05 = 336 Mtr Total =682 mtr. i.e. 682X 2.4= 1638 ie 1.638 MT |
2733 | GI Wire 6 No. SWG for screening etc. |
2734 | Eye Block for screening |
2735 | Tumbuckle for screening |
2736 | GI Pipe 50 mm dia with holes of 16mm dia at 150 mm for centre to centre for 2 m distance from bottomFor Transformer and for 11KV panels and fencing and Fixing of GI pipe 50mm with earth pit10 nos per PSS Providing Coal=125 kg,Charcoal 23 kg ,Salt 122 kg,Sand 84 kg in each Earth Pit(Earth Pit Material) |
2737 | MS plates 150x150x6mm for two connection |
2738 | 50x6 mm MS Flat connection with the mat to mat |
2739 | Nut and bolts galvanized various sizes |
2740 | Chequered plate cover 500x500x6mm i.e.11.8Kg |
2741 | MS Rod 20 mm round 3 mtr long and weighing 2.47 kg/m and digging of 3 meter pits for earth rods 20 mm dia |
2742 | Yard Lighting:-a) 9 m, Steel Tubular poles for yard lighting |
2743 | b)18 W LED Lamp complete with fittings |
2744 | c)Post Erection for gate |
2745 | d)Clamps for GI pipe bracket |
2746 | e)Underground cable 16 mm² for yard lighting |
2747 | f)PVC cable size 6 mm² for connecting LED lamp supply |
2748 | g)Junction box i/c MCCB and other allied |
2749 | Lighting Emergency (3 No LED Bulbs with holders / wire) |
2750 | control cable: 2x2.5 mm² |
2751 | control cable: 4x2.5 mm² |
2752 | control cable:12x2.5 mm² |
2753 | 3.5 core 95 mm² aluminium cable suitable for 415 V, AC |
2754 | Fire Fighting Equipmentsas per TS |
2755 | Safety Equipments & T & P as per TS |
2756 | CIVIL WORKS |
2757 | Control Room one Storey Building Sizes(14.7x14.8)sqm as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33202/2018 |
2758 | water supply and sanitary installation for Control Room Building. |
2759 | Electrical Installation for control room building (for 60 points) |
2760 | Septic Tank (1 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33254/2020 |
2761 | Rain Water Harvesting Tank (1 No per PSS) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33249/2020 |
2762 | Power Transformers Foundation suitable for upto 10 MVA (2 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33239/2020 |
2763 | Substation Transformer Foundation (1 No) |
2764 | VCB Foundation (5 Nos) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33241/2020 |
2765 | Foundation of R.S. Joist supports (16 Nos) as per drawing of HPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33243/2020 |
2766 | Foundation of CT, PT & LA(14Nos) as per drawing ofHPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33242/2020 |
2767 | Outdoor Cable Trench ( 80 mtr Per PSS) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33245/2020 |
2768 | Indoor Cable Trench ( 30 mtr trench per PSS) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33247-48/2020 |
2769 | Cost Of Boundary Wall (200Meter/Pss)as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33251-52/2020 |
2770 | Main Gate & Sub-Station Yard Gate(1 Nos) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33253/2020 |
2771 | Spreading of gravells/ Shingles in yard (30CUM ) as per drawing of HPSEBL/SEDES/SSD-478/2021-22-7972-79/2021 |
2772 | Formation of drainage system around the substation around 60x40mtr yard (200 Meter) as per drawing of |
2773 | Firewall Protection as per drawing HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33244/2020 |
2774 | Chain Link Fencing with wooven mesh of GI wire 15MX30M |
2775 | Cost of Soil Testing & Contour plans & design |
2776 | Site development for proposed 33/11KVsubstation at mohal under ED HPSEBL,Kullu. |
2777 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
2778 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
2779 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar |
2780 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead |
2781 | Demolishing Rcc work by mechnical means and stockpilling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. |
2782 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:Channels, angles, tees and flats |
2783 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all kind of soil |
2784 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting outanddisposal ofexcavatedearthleadupto50 mandliftupto 1.5 m, as directed by Engineer-in-charge Ordinary rock |
2785 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 |
2786 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 |
2787 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : - Cement mortar 1:4 (1 cement : 4 coarse sand) |
2788 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
2789 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars |
2790 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) |
2791 | Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
2792 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
2793 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :Payment to be made per metre cost of total length of barbed wire used. with GI barbed wire. |
2794 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturer’s specifications: - Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
2795 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturer’s specifications: - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
2796 | AUGMENTATION of 33/11 kv Substation |
2797 | Aug to 1X3.15(Talyahar at Mandi Circle) Total = 1 Nos |
2798 | Power Transformer (3.15 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2799 | 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m+ Spare- 50m} |
2800 | 11 kV Cable Termination Kit (400 mm², Outdoor) |
2801 | 11 kV Cable Termination Kit (400 mm², Indoor) |
2802 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
2803 | CIVIL WORKS |
2804 | Transformers Foundation [Power X-former] |
2805 | Trench O.B Type additional |
2806 | Aug to 2X3.15at Bhutti -Kullu Total = 1 Nos |
2807 | Power Transformer (3.15 MVA, 33/ 11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2808 | 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m+ Spare- 50m} |
2809 | 11 kV Cable Termination Kit (400 mm², Outdoor) |
2810 | 11 kV Cable Termination Kit (400 mm², Indoor) |
2811 | EARTHING (33 kV Sub-Station) |
2812 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
2813 | CIVIL WORKS |
2814 | Transformers Foundation [Power X-former] |
2815 | 33/11 KV Sub Station |
2816 | Aug to2X6.3 MVA (Banjar,Nagwain,Sarabai,Jari,Bajaura In Kullu Circle),(Chauntra,Kalkhar in Mandi Circle)(Ladrour,Tauni Devi in Hamirpur Circle) Total = 9 Nos |
2817 | Power Transformer (6.3 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2818 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2819 | 33 kV Switchgear & Allied Equipment: with 01 No., 33 kV Incomer |
2820 | 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2821 | 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2822 | 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2823 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2824 | 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2825 | 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2826 | 33 kV Potential Transformer (33 kV/110 V, 1F, Multi-Core, Outdoor), (1No. per F) |
2827 | Battery Bank with Dual FCBC Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 200 AH) |
2828 | 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m+ Spare- 50m} |
2829 | 11 kV Cable Termination Kit (400 mm², Outdoor) |
2830 | 11 kV Cable Termination Kit (400 mm², Indoor) |
2831 | 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Busbar VCB to Isolator}{50m+ Spare- 50m} |
2832 | 11 kV Cable Termination Kit (185 mm², Outdoor) |
2833 | 11 kV Cable Termination Kit (185 mm², Indoor) |
2834 | EARTHING (33 kV Sub-Station) |
2835 | Additional Control cable |
2836 | 4 core 2.5 mm2 |
2837 | 2 core 2.5 mm2 |
2838 | 12 core 2.5 mm2 |
2839 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
2840 | CIVIL WORKS |
2841 | Transformers Foundation [Power X-former] |
2842 | Station X-former Foundation |
2843 | Circuit Breaker Foundation |
2844 | Trenches |
2845 | I) Outdoor Trench |
2846 | Baffle wall in case of 2 No. Transformer |
2847 | Foundation of VCB |
2848 | Aug to 10 mVA (Naggar, Bhuntar in Kullu Circle) Total = 2 Nos |
2849 | Power Transformer (10MVA, 33/11 kV, ONAN, OLTC, Outdoor) |
2850 | 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2851 | 11 kV Cable (11 kV, 630 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m+ Spare- 50m} |
2852 | 11 kV Cable Termination Kit (630 mm², Outdoor) |
2853 | 11 kV Cable Termination Kit (630 mm², Indoor) |
2854 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
2855 | CIVIL WORKS |
2856 | Transformers Foundation |
2857 | New33/11 KV Sub Station |
2858 | 1X3.15 MVA (New Bus Stand Hamirpur Bypass Hamirpur Circle) Total = 1 Nos |
2859 | Power Transformer (3.15 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2860 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2861 | 33 kV Switchgear & Allied Equipment |
2862 | a) 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2863 | b) 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2864 | c) 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2865 | d) 33 kV Isolator (1250 A, 25kA,with Earth Switch) (Moterised) |
2866 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2867 | f) 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2868 | g) 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2869 | h) 33 kV Potential Transformer (33 kV/110 V, 1F, Multi-Core, Outdoor), (1No. per F) |
2870 | i) 33 kV Drop Out Fuse Unit (33 kV, Expulsion) |
2871 | 11 kV Switchgear and Allied equipment: 01 No. incomer Bus |
2872 | a) 11 kV incomer Bus: Control and Relay (CR) Panel with VCB (12 kV, 1250 A, 25KA) [Numeric Relay, IEC 61850] |
2873 | b) 11 kV Incomer Bus: Potential Transformer (11 kV/110V, 3F, Indoor) |
2874 | c) 11 kV LA/ Surge Arrester (9 KV, 10 kA ,Station Class, ZnO, Porcelain, Outdoor) |
2875 | d) 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m}+Spare |
2876 | e) 11 kV Cable Termination Kit (400 mm², Outdoor) |
2877 | f) 11 kV Cable Termination Kit (400 mm², Indoor) |
2878 | 11 kV Switchgear and Allied equipment: Single (2 No.) Outgoing Feeder |
2879 | a) 11 kV Outgoing Feeder: Control and Relay (CR) Panel with indoor VCB (12 kV, 1250 A, 25KA) including CT |
2880 | b) 11 kV Isolator (12 kV, 1250 A, 25 kA,with Earth Switch, Outdoor) Motorised |
2881 | c) 11 kV LA/ Surge Arrester (9 kV, 10 kA Station Class, ZnO, Porcelain, Outdoor) |
2882 | d) 11 kV Cable (11 kV, 185 mm², XLPE, Three Core, Armoured){Busbar VCB to Isolator}{50m+ Spare- 50m} |
2883 | e) 11 kV Cable Termination Kit (185 mm², Outdoor) |
2884 | f) 11 kV Cable Termination Kit (185 mm², Indoor) |
2885 | LT Cable (1.1 kV, 3.5 Core, 70 mm2) {from Station Tfr} |
2886 | Capacitor Bank (3-?, 50 Hz, 1200 KVAr) [ IS:2834 ] |
2887 | Automatic Capacitor Switch (12 kV, 1250 A, 25 kA) [REC Spec. 20/1981] |
2888 | Battery Bank with DualFCBC Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 200 AH) |
2889 | Distribution Panel (30V, DC) |
2890 | Distribution Panel (415 V, AC)Distribution Panel (415 V, AC) 200 Amp as incomerMCCB & 6 Nos 63 Amp MCCB as outgoing with voltmeter and Ammeter of 0.5 accuracy class alongwith phase indicating lamps of accuracy class 0.5 |
2891 | Super Strcture and Bus Bar Arrangement |
2892 | (i) R.S. Joists, size 12800x250x125 mm 8 supports |
2893 | (ii) R.S.Joists, size 4200x250x125 mm supports for Power Transformer"s LA, Station Transformer LA, I/C, Power Transformer"s CTs |
2894 | (iii) M.S. channel iron 125x65 mm, X-arm @13.1 kg/m at 5% wastage for Bus-bar,Isolators,CT, LA"s transformer etc. =100 |
2895 | (iv) M.S. angle iron 65x65 X-arm @ 5.8 kg/m & 5% wastage for body supports belt of Station transformer including 5% wastage |
2896 | (v) Nuts & Bolts with Washers off sizes |
2897 | BUS-BAR |
2898 | (i) 3 Disc insulators Tension String complete with fitting |
2899 | (ii) ACSR conductor 200 mm² at 10 % wastage |
2900 | For jumpers at 2 m average 15 nos I.e. |
2901 | (iii) Tee connections |
2902 | (iv) PG clamps |
2903 | Gantry for 2 no. outgoing feeder |
2904 | (a) Steel tubular pole 11 m long for 1 No. out going Feeder |
2905 | (b) RCC muffs (2000mm) & concreting thereof for 1 No. out going Feeder |
2906 | (a)4.2 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross armsfor Sub-Station With 1 No. out going Feeder (11Kv) |
2907 | (b) M.S. angle iron 50X50X6 mm 4.5 kg/mCross arms for Sub-Station With 1 No. out going Feeder [ 4.2x3+5.33x2] (11kV) |
2908 | (d) M.S. Half clamps |
2909 | (e) Full Clamp |
2910 | (f) Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
2911 | ACSR 100 mm² conductor for Jumpers [approx. 4 mtr/ phase] |
2912 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) |
2913 | Clamps for 1 Nos. out going Feeder |
2914 | 11 kV Isolator |
2915 | Earthing of 33/11KV Substation |
2916 | Earthing of 33 kV yard & equipment & 22 kV or 11kV panels M.S. flat 50x6 mm,wt. 2.4 kg/m At 5% wastage:- (a) Transformer Earthing at 3 points for 2 Nos Power Transformers (body & neutral) at 10 Mtr each 2X(3x10)x1.05=63 Mtr (b) For 4 No. LA"s at 4.2 Mtr each 2X4.2x2x1.05=17.64 Mtr (c) For 22 nos. 33 kV super structure at 11.50 Mtr each 22x11.50x1.05 =265.65 Mtr i.e. 266 Mtr (d) For 32 Nos. VCB & CT body earthing at 10 m Each (32x10)x1.05 = 336 Mtr Total =682 mtr. i.e. 682X 2.4= 1638 ie 1.638 MT |
2917 | GI Wire 6 No. SWG for screening etc. |
2918 | Eye Block for screening |
2919 | Tumbuckle for screening |
2920 | GI Pipe 50 mm dia with holes of 16mm dia at 150 mm for centre to centre for 2 m distance from bottomFor Transformer and for 11KV panels and fencing and Fixing of GI pipe 50mm with earth pit10 nos per PSS Providing Coal=125 kg,Charcoal 23 kg ,Salt 122 kg,Sand 84 kg in each Earth Pit(Earth Pit Material) |
2921 | MS plates 150x150x6mm for two connection |
2922 | 50x6 mm MS Flat connection with the mat to mat |
2923 | Nut and bolts galvanized various sizes |
2924 | Chequered plate cover 500x500x6mm i.e.11.8Kg |
2925 | MS Rod 20 mm round 3 mtr long and weighing 2.47 kg/m and digging of 3 meter pits for earth rods 20 mm dia |
2926 | Yard Lighting:-a) 9 m, Steel Tubular poles for yard lighting |
2927 | b)18 W LED Lamp complete with fittings |
2928 | c)Post Erection for gate |
2929 | d)Clamps for GI pipe bracket |
2930 | e)Underground cable 16 mm² for yard lighting |
2931 | f)PVC cable size 6 mm² for connecting LED lamp supply |
2932 | g)Junction box i/c MCCB and other allied |
2933 | Lighting Emergency (3 No LED Bulbs with holders / wire) |
2934 | control cable: 2x2.5 mm² |
2935 | control cable: 4x2.5 mm² |
2936 | control cable:12x2.5 mm² |
2937 | 3.5 core 95 mm² aluminium cable suitable for 415 V, AC |
2938 | Fire Fighting Equipmentsas per TS |
2939 | Safety Equipments & T & P as per TS |
2940 | Civil Works |
2941 | Control Room one Storey Building Sizes(14.7x14.8)sqm as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33202/2018 |
2942 | water supply and sanitary installation for Control Room Building. |
2943 | Electrical Installation for control room building (for 60 points) |
2944 | Septic Tank (1 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33254/2020 |
2945 | Rain Water Harvesting Tank (1 No per PSS) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33249/2020 |
2946 | Power Transformers Foundation suitable for upto 3.15 MVA (2 Nos) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33239/2020 |
2947 | Substation Transformer Foundation (1 No) |
2948 | VCB Foundation (5 Nos) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33241/2020 |
2949 | Foundation of R.S. Joist supports (16 Nos) as per drawing of HPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33243/2020 |
2950 | Foundation of CT, PT & LA(14Nos) as per drawing ofHPSEBL/SE(D)//ESHPSEBL/HAMIRPUR/33242/2020 |
2951 | Outdoor Cable Trench ( 80 mtr Per PSS) as per drawing of HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33245/2020 |
2952 | Indoor Cable Trench ( 30 mtr trench per PSS) as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33247-48/2020 |
2953 | Cost Of Boundary Wall (200Meter/Pss)as per drawing ofHPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33251-52/2020 |
2954 | Main Gate & Sub-Station Yard Gate(1 Nos) as per drawing of HPSEBL/SE(D)/ESHPSEBL/HAMIRPUR/33253/2020 |
2955 | Spreading of gravells/ Shingles in yard (30CUM ) as per drawing of HPSEBL/SEDES/SSD-478/2021-22-7972-79/2021 |
2956 | Formation of drainage system around the substation around 60x40mtr yard (200 Meter) as per drawing of |
2957 | Firewall Protection as per drawing HPSEBL/SE(D)/ES HPSEBL/HAMIRPUR/33244/2020 |
2958 | Chain Link Fencing with wooven mesh of GI wire 15MX30M |
2959 | Cost of Soil Testing & Contour plans & design |
2960 | Site Development (New Bus Stand Hamirpur Bypass Hamirpur Circle) |
2961 | Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
2962 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kind of soils |
2963 | Carriage of excavated earth by mechanical means for disposal in the dumping area for a lead of 5 Km |
2964 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
2965 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) |
2966 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
2967 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size). |
2968 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in flooring , in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
2969 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
2970 | Aug to1X3.15 MVA (Kohla in Hamirpur Circle) Total = 1 Nos |
2971 | Power Transformer (3.15 MVA, 33/11 kV, ONAN, Off Load Tap Changer, Outdoor) |
2972 | Sub Station Transformer (100 kVA, 33/0.4 kV) |
2973 | 33 kV Switchgear & Allied Equipment: with 01 No., 33 kV Incomer |
2974 | 33 kV Control and Relay (CR) Panel (with NumericDifferential Relay, IEC 61850) |
2975 | 33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850] |
2976 | 33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type) |
2977 | d) 33 kV Isolator (1250 A, 25kA,with Earth Switch) (Moterised) |
2978 | e) 33 kV Isolator (1250 A, 25kA, without Earth Switch) (Moterised) |
2979 | 33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain) |
2980 | 33 kV Current Transformer (33 kV, 1F, Multi Ratio Multi Core, Outdoor) (1 No. per F) |
2981 | 11 kV Cable (11 kV, 400 mm², XLPE, Three Core, Armoured){Transformer to 11 kV Bus}{50m+ Spare- 50m} |
2982 | 11 kV Cable Termination Kit (400 mm², Outdoor) |
2983 | 11 kV Cable Termination Kit (400 mm², Indoor) |
2984 | EARTHING (33 kV Sub-Station) |
2985 | Additional Control cable |
2986 | 4 core 2.5 mm2 |
2987 | 2 core 2.5 mm2 |
2988 | 12 core 2.5 mm2 |
2989 | Cost is inclusive of dismantaelling of existing infra and depositing all Dismantalled Material back to Concerned Store as per direction of Engineer In Charge |
2990 | CIVIL WORKS |
2991 | Transformers Foundation [Power X-former] |
2992 | Circuit Breaker Foundation |
2993 | I) Outdoor Trench |
2994 | I) Indoor Trench |
2995 | New 33 KV Single Circuit Line with Dog Conductor on STP for EV Charging station |
2996 | ACSR 6/1/4.72 (100mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
2997 | New 33 KV Single Circuit Line with Dog Conductor on 13 mtr STP |
2998 | Muffs with concerete filling |
2999 | X-Arms: [MS Channel Iron (100x50x6 mm, Length: 3250 mm i/c tolerance 100 mm on either side] x 10 No. Structures |
3000 | Disc insulator String (Suspension) sets: 3 No. Discs in each string: ^^(Porcelain, CT, 12 kV, 90 kN) including dead end clamps etc)x (Single circuit : 3No conductors) x 1 No sides) /Run Throu" structures. |
3001 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
3002 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
3003 | Belt Set - MS Angle Iron: 65x65x6, Length:(1800 mm) x 2 No. |
3004 | X-Bracing Set - MS Angle Iron: 50X50x6, Length [2700 mm) x 2 No.] |
3005 | X-Arm (Horizontal) - MS Channel Iron: (100x50x6 mm), Length: 3250 mm i/c tolerance 100 mm on either side x 2 No.] |
3006 | Disc insulator String (Strain) sets: 3 No. Discs in each string: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (Single Circuit: 3 No. conductors) x (2 No. sides) /Dead Structures |
3007 | 33 kV Pin Insulators (Porcelain, 36 kV, 10 kN): 3 No per double pole structure |
3008 | Stay set complete in all respect (2 No./Run Thro & 4 No. / Dead End) |
3009 | Stay Wire (7/4.00 mm) (10 kg Per Stay Set) |
3010 | HT Earthing set complete |
3011 | Earth wire (GI, 6 SWG) {Includes Single wire length and Additional 1% (Sag and wastage)}@ 150 kg/km |
3012 | Eye Hook for earth wire |
3013 | Earth Reel |
3014 | MS Channel Iron: 75x40x6, Length :3300 mm |
3015 | Half clamps: [On Double Pole Dead End structure: 6 No, Double Pole Run Thro" structure: 8 No] |
3016 | Full clamps: [On Double Pole Dead End structure: 4 No, Double Pole Run Thro" structure: 4 No] |
3017 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 20 mm F or more(with flat and spring washers)] |
3018 | Barbed wire |
3019 | Danger Plate (203X200X1.6mm) |
3020 | Red Oxide |
3021 | Aluminium Paint |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail