Construction Of Shed Tender For Baghrajan Mandir Me Shed Ka Nirman
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Mar 2024
0 days left
EMD
3.32 Lakhs
Bank guarantee accepted
Document Fee
3894
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kulpahar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
CONSTRUCTION OF SHED Baghrajan Mandir Me Shed Ka Nirman
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. |
| 2 | Coarse sand filling in plinth including supply of necessary quantity of coarse sand/moorum from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work. (as per S.I. No. 255) |
| 3 | Cement concrete with 4cm (1/2\"\") gauge approved stone ballast, approved coarse sand. cement in the proportion 8:4:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. (as per S.I. No. 273) |
| 4 | As in item (283) above but in RCC raft foundation and footing with 4cm(11/2\"\") gauge approved stone ballast. |
| 5 | As in item (283) above but in RCCcolumns in1.1.5.3 |
| 6 | As in item (283) above but in the lighter beams i.e having spans upto 6 meters (20). |
| 7 | Providing and injecting chemical emulsion for pre-constructional antitermite treatment and creating and chamical bariier under and arround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981)approved material such as Hepthachlor or chlordane will be used. The rate of application of chemical emulsion shall be as follows. |
| 8 | Class-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. (as per S.I. No. 303) |
| 9 | As in item (309) above but walls of one brick thick add for extra labour to the rate of item (309) |
| 10 | Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. (as per S.I. No. 504) |
| 11 | 12mm thick plaster with cement and fine sand in 1:4 including supply of all materials, labour and T&P etc. required for proper completion of the work (S.I.No. 584) |
| 12 | Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work. |
| 13 | 2.5 cm (1\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4\") graded approved stone laid in panels finished with 3mm (1/8\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and eXCLUDING 8cm (3\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. |
| 14 | MS work in truss including all material, labour, T&P etc. required for proper completion of the work. |
| 15 | Supply and fixing Galvanized corrugated iron roofing 24 B.W.C. in position including supply of materials, labour and tools and plants etc. required for proper completion of the work and including wastage. |
| 16 | Supplying and fixing 22 B.W.G. ridges valleys and gutters for iron roofing fixed with Jor U 10mm (3/8\") dia with G.I. Limpet and bitumen washers complete including supply of all materials, labour and tools and plants etc. required, labour and tools and plants etc. required for proper completion of the work including wastage. |
| 17 | supply & Fixing of 10cm Internal dia PVC down-pipes complete with rose- heads, bends abd gratings & including supply of necessary M.S. clamps 2.5cmx3mm (1\"x1/8\") fixed to walls, with & including supply of 15cm (6\") long 6mm (1?4\") dia nails & including supply of all materials, labour and T&P etc required for proper completion of the work and also including repair of plaster, pointing etc if damaged during fixing of pipes, details of 30\" length. |
| 18 | Earth work in filling with Material Obtained from Borrow Pits (Carted earth)Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical specification clause 301.5 |
| 19 | S/f of electrical work (Sheet atteched) |
AI Tender Summary
Tender Timeline
Mar 06, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 12, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender