Providing Furniture Items To Iwhc Building At Narayankhed In Sangareddy District-135.00 Supply, Delivery And Assembling At Site, Steel Cot ( Single Coat ) Of Following Specifications: The Cot Of Bed Should Be 1900Mm ( L ) X 800Mm ( W ) X 460Mm ( H ) . The Sheet Should Be Made Of Cr Top With 18 Guage ( 1.22Mm ) Thick Cr Sheet Should Be Crimped On Four Sides Full Length To A Depth Of 50Mm So As To Accommodate Welding With Ms Flat Of Size 50X3mm Alround The Inner Edge Of The Crimp Of The Sheet. The Top Of The Bottom Welded With 2 Nos Reinforced With Two Formed Channels To Size 75Mm Width And 15X50x50x50x15mm Of 1Mm Thickness Flanges Arc Welded Inside The Lenght Wise With 5 Inches Gap. Legs Frame Cr Tube 31Mm Round 1.6 Guage ( 16 Thickness ) The Headbow Height Should Be Made Of 700Mm Height And Legbow 600 Mm Height. One Horizontal And Two Vertical Cr Tube 19.5Mm 1.22 Guage Thickness. Epoxy Polyster Powder Coating Plain Mat Gray Only Dft ( Dry Film Thickness ) Of 45 Microns As Is101. The Total Cost Of Unit Shall Include Cost Of All Materials, Manufacture, Transportation To Site, Assembling At Site Including Loading, Unloading And Assembling Charges At Different Floor Levels Of The Building. 4.00 Supply, Delivery And Assembling The Site ‘S’ Type Chairs With Arms: Seat And Back Nylon Cane Netted, Seat And Back Frame Made Of Cr Tube 25.4Mm, 1.22 Mm Thickness / Teak Wooden. Seat Size 46 Cm X 46 Cm Back Size 46 Cm ( W ) X 38 Cm ( H ) , Back Is ( Curve Model ) . The Understruture Assembly Is A Cantilever Type Frame Made Of Cr Tube Dia 25.4 Cm 14 Guage 2 Mm Thickness Arms Shall Be Of Injection Moulded Foam Poly Propylene Hands With Pvc Bush. Steel Should Undergo Pre Treatment Process Viz, Degreasing, Pickling, Phosphating Etc For Rust Resistance And Durability As Per Is Std 3618 1996. Epoxy Polyster Powder Coating Plain Mat Brown As Per Is 101. The Total Cost Of Unit Shall Include Cost Of All Materials, Manufacture, Transportation To Site, Assembling At Site Including Loading, Unloding And Assembling Charges At Different Floor Levels Of The Building, Etc., Complete For Finished Item Of Work. The Item Shall Carry A Warranty Period Of 3 Years ( 36 Months ) From The Date Of Supply. 2.00 Supply, Delivery And Assembling At Site Staff / Office Table With The Following Specifications: The Over All Dimension Should Be 1200 Mm X 590 Mm X 750 Mm. The Table Top Should Be 18Mm Thick With Pre-Laminated Board ( Plb ) , Of Approved Quality And Shade, Grade Ii Type Ii Conforming To Is:12823. The Edges Should Be Sealed With 2Mm Thick Hot Preessesd Pvc Beading. The Understructure Should Be Top Frame C Section 40 X 40 Mm 1 Mm Thickness Supported Alround Tubular Frame Of Cr Round Tube Of 25.4 Mm , 1.2Mm Thick Confirming To Is 513. The Tubular Frame Should Be Made Of Cr Round Tube Of Dia 25.4Mm, 1.2Mm Thick. For Storage, The Table Should Have 3 Drawer Unit The Overall Dimention 350 ( W ) X 430 ( H ) X 560 ( D ) Mm In Which The Shell And Drawer Tray Shall Be 0.5 Mm Thick Crca Ms, Drawer Front Of 0.8 Mm Thick Crca Ms Sheet, Provided With 6 Lever Cam Lock And In Built Plastic Handles. Steel Should Undergo Pre Treatment Process Viz, Degreasing, Pickling, Phosphating Etc For Rust Resistance And Durability As Per Is Std 3618 1996.Epoxy Polyster Powder Coating As Per Is101. The Total Cost Of Unit Shall Include Cost Of All Materials, Manufacture, Transportation To Site Assembling At Site Including Loading, Unloading And Assembling Charges At Different Floor Levels Of The Building, Etc.Complete For Finished Item Of Work. The Item Shall Carry A Warranty Period Of 3 Years ( 36 Months ) From The Date Of Supply. 2.00 Supply, Delivery And Assembling At Site Almariahs ( Plain Model Storewell ) Of Size: 1980X900x450 Mm, As Shown In The Drawing With The Following Specifications: Store Well Shall Be 4 Nos. Fixed Shelves Of Inside Shelves Size 878 X 420 Top Bottom Lh And Rh Side And Back All Parts Cr Sheet 1 Mm Thickness With Mounting. Die Cast Recess Type Handle With 3-Way Locking Mechanism Should Be Provided With Levelers. Mild Steel As Raw Material Should Be Used, Cold Rolled Close Annealed Steel Used For Thickess 0.6 To 1.2 Mm Range As Per Is – 513 1994 ( Reaffirmed In 1998 ) . Grade ‘D’ Or “Dd’ Quality. Chemical Composition, Tensile Properties, Bend Rest, Surface, Flatness, Hardness As Per Is-513 1994. Hot Rolled Steel Used For Thickness 2.0 To 3.15Mm Range As Per Is-1079 1994 ‘D’Quality Or Is-10748 1995 Grade-Ii. Chemical Composition, Tensile Properties, Bend Rest, Surface Flaws, Roll Mark, Dent & Lines Etc. Painting Shall Be Epoxy Powder Coated Paint 55 Microns. The Total Cost Of Unit Shall Include Cost Of All Materials, Manufacture, Transportation To Site, Assembling At Site Including Loading, Unloading And Assembling Charges At Different Floor Levels Of The Building, Etc., Complete For Finished Item Of Work. The Item Shall Carry A Warranty Period Of 3 Years ( 36 Months ) From The Date Of Supply 4.00 Supply, Delivery And Assembling At Site Slotted Angle Racks Of Size 1800X900 X 450Mm. The Panels Shall Be Of Size 900X450mm. Each Panel Shall Withstand A Load Of 100 Kg / Sqmt Udl. The Angles Of Size 40X40x2mm Shall Be In A Single Piece Of Length 6, Without Joints And Shall Confirm To Is: 5986 ( St 42 ) . Open Racks With Side Straps On Two Sides ( Left And Right ) , 150Mm Heigh. The Panels Shall Be Made Up Of Mild Steel Sheets, Not Less Than 0.8 Mm Thick And Shall Confim To Is 513 D. Epoxy Polyester Powder Coating Of Bs Grey Colour And Shade Shall Be Applied To All Components With An Average Dry Film Thickness Of Not Less Than 35 Microns.The Total Cost Of Unit Shall Include Cost Of All Materials, Manufacture, Transportation To Site, Assembling At Site Including Loading, Unloading And Assembling Charges At Different Floor Levels Of The Building, Etc.Complete For Finished Item Of Work. The Item Shall Carry A Warranty Period Of 3 Years ( 36 Months ) From The Date Of Supply.
