Public Health Engineering Department-PHED has published Tender For Rewinding And Repairing Of Electric Motors Under Urban Water Supply Scheme Sriganganagar (Annual Rate Contract) (Two Envelope). Submission Date for this Tender is 11-03-2024. Electrical Maintenance Tenders in sriganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Rewinding of three phase squirrel cage induction motor ofMonoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),"E" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. |
| 2 | 5 H.P. |
| 3 | 7.5 HP |
| 4 | SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP) |
| 5 | Connection Plates |
| 6 | up to 10 HP |
| 7 | Cooling Fan |
| 8 | up to 10 HP |
| 9 | GM/SS bush |
| 10 | Upto 10 HP |
| 11 | Mechanical reconditioning of Bearing sheet |
| 12 | Upto 10 HP |
| 13 | Mechanical reconditioning ofImpeller sheet and Key way slot |
| 14 | Upto 10 HP |
| 15 | Oil seal |
| 16 | Upto 10 HP |
| 17 | Labour charge for opening and fitting of pump sets |
| 18 | Upto 10 HP |
| 19 | Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (Including cost of copper wire) "E" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump setsand transportation to and fro from installation site complete as per direction of engineer in charge at site. |
| 20 | Above 15.00 HP but upto 17.50 HP |
| 21 | Above 20.00 HP but upto 25.00 HP |
| 22 | Above 35.00HP but upto 40.00 HP |
| 23 | Above 45.00 HP but upto 50.00 HP |
| 24 | Above 60.00 HP but upto 75.00 HP |
| 25 | Above 75.00 HP but upto 100.00 HP |
| 26 | PROVIDING SUPER ENAMEL COPPER WIRE SUITABLE FOR winding OF INDUCTION MOTOR AS PER SPECIFICATIONS. |
| 27 | Connection Plates |
| 28 | 5 HP to 20 HP |
| 29 | 20 HP to 30 HP |
| 30 | 30 HP to 50 HP |
| 31 | Above 50 HP to 100 HP |
| 32 | Cooling Fan |
| 33 | 5 HP to 20 HP |
| 34 | 20 HP to 30 HP |
| 35 | 30 HP to 50 HP |
| 36 | Above 50 HP to 100 HP |
| 37 | Fan Cover |
| 38 | 5 HP to 20 HP |
| 39 | 20 HP to 30 HP |
| 40 | 30 HP to 50 HP |
| 41 | Above 50 HP to 100 HP |
| 42 | G.M./SS Gland Guide Bush |
| 43 | 5 HP to 20 HP |
| 44 | 20 HP to 30 HP |
| 45 | 30 HP to 50 HP |
| 46 | Above 50 HP to 100 HP |
| 47 | Shaft with Sleeve Chuck Nut |
| 48 | 5 HP to 20 HP |
| 49 | 20 HP to 30 HP |
| 50 | 30 HP to 50 HP |
| 51 | Above 50 HP to 100 HP |
| 52 | Shaft Chuck Nut |
| 53 | 5 HP to 20 HP |
| 54 | 20 HP to 30 HP |
| 55 | 30 HP to 50 HP |
| 56 | Above 50 HP to 100 HP |
| 57 | G.M. Neck Ring |
| 58 | 5 HP to 20 HP |
| 59 | 20 HP to 30 HP |
| 60 | 30 HP to 50 HP |
| 61 | Above 50 HP to 100 HP |
| 62 | Bush Shaft Sleeve of G.M. |
| 63 | 5 HP to 20 HP |
| 64 | 20 HP to 30 HP |
| 65 | 30 HP to 50 HP |
| 66 | Above 50 HP to 100 HP |
| 67 | G.M. Gland Cover |
| 68 | 5 HP to 20 HP |
| 69 | 20 HP to 30 HP |
| 70 | 30 HP to 50 HP |
| 71 | Above 50 HP to 100 HP |
| 72 | S.S. Shaft (Non Magnetic) |
| 73 | 5 HP to 20 HP |
| 74 | 20 HP to 30 HP |
| 75 | 30 HP to 50 HP |
| 76 | Above 50 HP to 100 HP |
| 77 | G.M. Shaft Sleeve Check Nut |
| 78 | 5 HP to 20 HP |
| 79 | 20 HP to 30 HP |
| 80 | 30 HP to 50 HP |
| 81 | Above 50 HP to 100 HP |
| 82 | M.S. Shaft Check Nut |
| 83 | 5 HP to 20 HP |
| 84 | 20 HP to 30 HP |
| 85 | 30 HP to 50 HP |
| 86 | Above 50 HP to 100 HP |
| 87 | Cooling pipe set with nozzle & Nut |
| 88 | 5 HP to 20 HP |
| 89 | 20 HP to 30 HP |
| 90 | 30 HP to 50 HP |
| 91 | Above 50 HP to 100 HP |
| 92 | AIR Cock |
| 93 | 5 HP to 20 HP |
| 94 | 20 HP to 30 HP |
| 95 | 30 HP to 50 HP |
| 96 | Above 50 HP to 100 HP |
| 97 | JOB WORK FOR REPAIR OF PUMP MOTOR |
| 98 | Bearing Housing (rebuilding, turning & finishing) |
| 99 | 5 HP to 20 HP |
| 100 | 20 HP to 30 HP |
| 101 | 30 HP to 50 HP |
| 102 | Above 50 HP to 100 HP |
| 103 | Bearing Cap (rebuilding, turning & finishing) |
| 104 | 5 HP to 20 HP |
| 105 | 20 HP to 30 HP |
| 106 | 30 HP to 50 HP |
| 107 | Above 50 HP to 100 HP |
| 108 | Impeller Reconditioning for all type of Pump |
| 109 | 5 HP to 20 HP |
| 110 | 20 HP to 30 HP |
| 111 | 30 HP to 50 HP |
| 112 | Above 50 HP to 100 HP |
| 113 | Labour Charges for Dismantling & Assembling of Pump |
| 114 | 5 HP to 20 HP |
| 115 | 20 HP to 30 HP |
| 116 | 30 HP to 50 HP |
| 117 | Above 50 HP to 100 HP |
| 118 | Coupling with stud and rubber bush |
| 119 | 5 HP to 20 HP |
| 120 | 20 HP to 30 HP |
| 121 | 30 HP to 50 HP |
| 122 | Above 50 HP to 100 HP |
| 123 | Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification |
| 124 | 6309 |
| 125 | 6311 |
| 126 | 6312 |
| 127 | Routine maintenance of centrifugal coupled pump and motorincluding opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job |
| 128 | 5 HPto 20 HP |
| 129 | 20 HPto 30 HP |
| 130 | Above 30 HP and up to 50 HP |
| 131 | Above 50 HP and up to 100 HP |
| 132 | Cleaning of Electric PanelPMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job. |
| 133 | Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. |
| 134 | 5 HP to 20 HP |
| 135 | Above 20 HP and up to 30 HP |
| 136 | Above 30 HP and up to 50 HP |
| 137 | Above 50 HP and up to 100 HP |
| 138 | Labour charges for removing electric fault in wiring / making connection through lugs (with the help of cramping tool) of motor pump set with starter atheadworks of water supply scheme including cost of insulation tape etc.. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
