Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-04-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-04-2024 |
| 2 | 02-04-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-04-2024 |
| 3 | 26-03-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-04-2024 |
| Sl. No. | Item Description |
| 1 | B/R ItemsExcavating in trenches in soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out. in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Excavating inpost holes( or similar holes) each n exc0.50 cum , getting out,returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed. |
| 4 | M&L for Sand filling under floors or in foundationincluding watering and consolidatedand compacted with clean dry sand complete all as specified and directed. |
| 5 | Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 6 | M&L for hardcore of gauge n.exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed. |
| 7 | M&L for cement concrete type D2, 1:4:8using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed. |
| 8 | M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in copping and filling in back of chowkatthe like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 9 | M&L for RCC(Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) as in foundation,including rafts,footings,foundation beams plinth beams bases for columns etc. complete all as specified and directed. |
| 10 | M&L for R.C.C 1:2:4 (Nominal mix) type B-1 using 20 mm graded stone aggregatefor as in chajja etc complete all as specified and directed. |
| 11 | M&L for R.C.C 1:2:4 (Nominal mix) type B-1 using 20 mm graded stone aggregatefor Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 12 | M&L for RCC(Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc. complete all as specified and directed. |
| 13 | M&L for Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as specified. |
| 14 | Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent) |
| 15 | M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 17 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical to rough finished surface complete all as specified and directed. |
| 18 | M&L for formworkto chullah hoods, chajjas, troughs and similar items in cluding edgescomplete all as specified and directed. |
| 19 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 20 | M&L for formwork to sides of pillars, posts, struts, piers,columns and stanchions rough finished surfaces of concrete, square, rectangular or polygonal in shape complete all as specified and directed. |
| 21 | S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 22 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed. |
| 23 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatm moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain/decorative colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing. etc complete all as specified and directed. |
| 24 | S&F Solid PVC Door Frame of size 60mm x 30mm made out of solid PVC foam with fine cellular structure having smoother out integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screws complete all as specified Make : Rajshree/Sintex/H2O solution. |
| 25 | S&F 150mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 26 | S&F 100mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 27 | S&F 75mm aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 28 | S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd. |
| 29 | S&F 100mm Butt hinges,medium weight, cold rolled mild steel,complete all as specified and directed. |
| 30 | S&F 50mm Butt hinges,medium weight, cold rolled mild steel,complete all as specified and directed. |
| 31 | S&F 150mm size aluminium handle cast typecomplete all as specified and directed. |
| 32 | S&F 100mm size aluminium handle cast typecomplete all as specified and directed. |
| 33 | S&F 75mm size aluminium handle cast typecomplete all as specified and directed. |
| 34 | M&L for floor door stopper ofbrass body and tongue with hard drawn steel spring overall length of cover plate 140mm,fixed in floor complete all as specified anddirected. |
| 35 | S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed. |
| 36 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as secified and as directed |
| 37 | M&L for MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165and similar workcomplete all as specified and directed. |
| 38 | S&F Mild steel screw bolts Diameter of neck in 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 10cm and n exc 15cm longcomplete all as specified and directed. |
| 39 | M&L forMild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 40 | M&L forTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 41 | M&L forTMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 42 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed. |
| 43 | S&F MSframed work confirming to Fe 410 -W quality Aas in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 44 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (each line wire to be measured) |
| 45 | M&Lfor 1.25mm thickpressed steel door frame of size 105mm x 60mm with one or more rebates including necessaryfixing lugs , hinges, lock strike plate etc complete all as specified and directed. |
| 46 | M&L for Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed. |
| 47 | M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.)complete all as speecified and directed. |
| 48 | M&L for anodised aluminium snap grid (SIZE-605x605MM) frame work for false ceiling complete all as specified and directed. |
| 49 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 50 | S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 51 | S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding towall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed. |
| 52 | M&L for 18/19mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing fixed with screws to timber frame work complete all as specified and directed. |
| 53 | M&L for Granite (of any type) tiles 16mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 20mm thick bedding layer in cement mortar 1:6 including grinding and polishing complete all as specified and directed. |
| 54 | M&L for 75mm thick PCC 1:3:6 type C2(Using 40mm graded stone aggregate) as in plinth protectionfinishedeven and smoothusing extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed. |
| 55 | M&L for 75mm thick PCCtype D2,1:4:8 using 40mm graded stone aggregateas in sub base of PCC floorcomplete all as specified and directed. |
| 56 | M&Lfor preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 57 | M&L fortwo coats of synthetic enamel paint on false ceiling including preparation of newsurfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 58 | M&L for one coats of synthetic enamel painton oldtreated steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 59 | M&L for two coats of synthetic enamel paint over one coat of red oxideon new steel surfaces of any description over 10cm in width or girthincluding preparation of surfaces complete all as specified and directed. |
| 60 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 61 | S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified anddirected. |
| 62 | S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top (thereated) including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and directed. |
| 63 | S&F Bib taps,15mmcast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or for CPVC pipes and fixed complete all as specified and directed. |
| 64 | S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 65 | S&Ffancy type, chromium platedstop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 66 | S&F in repair fancy type stop valve/angle valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed. |
| 67 | S&F in repairGun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20mm bore and fixed as in repair complete all as specified and directed. |
| 68 | S&FGun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20mm bore and fixedcomplete all as specified and directed. |
| 69 | S&F Ball brass valves, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20mm bore complete all as specified and directed. |
| 70 | S&F 32mm waste fittings,brass,chromium plated for glazed ware sinks,basin,etc with long screwed shanks and fly-nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 71 | S&FPVC connectionspipe ,15mm dia size with PTMT nuts of length 600mm complete all as specified and directed. |
| 72 | S&F 75mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 73 | S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring jointslaid in trenches or in floors complete all as specified and directed. |
| 74 | S&F 110mm PVC (SWR)pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed. |
| 75 | S&F 75mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 76 | S&F110mm bore PVC (SWR) bends with rubber ring joints any radius complete all as specified and directed. |
| 77 | S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 78 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 79 | S&F PVC (SWR) floor trap 75mm dia , plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 80 | S&FPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed. |
| 81 | S&F sinks made of stainless steel01mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 82 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | Dimantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified anddirected |
| 84 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed. |
| 85 | M&L for powder coated(minimum thickness of powder coating 50 micron)anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed.Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment.(ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid. |
| 86 | M&L for powder coated(minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.)complete all as speecified and directed. |
| 87 | M&L 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws as in ceiling flat or sloping complete all as specified and directed. |
| 88 | M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface etc complete all as specified andand directed. |
| 89 | M&Lfor Non Skidceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to matchover and including screed bed or bedding layer 20mm thick in cement mortar 1:6for laying floor finishes etc complete all as specified and directed |
| 90 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 91 | M&L forrendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC will be measured and paid separately under respective item of this schedule. |
| 92 | M&L for preparing new plastered surface of walls with 1 coat ofBirla/Asian wall care putty 3mm thick and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed. |
| 93 | M&L preparation of new plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed. |
| 94 | M&L for preparation of surfaces and applying 1mm thick wall care putty and two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 95 | M&L for preaparation of new surface and apply two coat of oil bound distemer white or tint on walls complete all as specified and directed. |
| 96 | M&L fornewly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including 01mm thick wall care putty etc complete all as specified and as directed. |
| 97 | M&L for sheet glass, 4.8mm thick, ordinary quality and glazing with oil putty/aluminium beading in squares exc. 0.50 Sqm each paneground or obscured or frosted, on one side complete all as specified and directed. |
| 98 | Cutting existing steel tubing bore of pipe 15mm for alterations or additions (Each cut measured), Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) done in position without taking down complete all as specified and directed. |
| 99 | S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 100 | S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 101 | S&F 15 mm bore pillar taps fancy type (long neck) cast copper alloy with hot & cold mixturechromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and directed. |
| 102 | S&F Toilet paper holderbrass chromium plated fixed with and including chromium plated brass screwswith wooden plugs complete all as specified and directed. |
| 103 | S&FVitreous china wash down water closet European type (pedestal pattern) (excluding flushing cistern and flush pipe) Seat and cover for pedestal panincluding connection to outgoing pipe and seat cover and flushing pipe complete all as specified and directed. |
| 104 | Suppy and fixing Vitrious china urinals bowl type (Back or corner wall type ) complete including providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement with brackets ,flush pipes ,grating and union for discharge pipe etc complete all as specified and directed. |
| 105 | S&F in repair vitreous china wash hand basin in repair oval special type 510x410mm including CP fancy type 15 mm pillar taps including 32mm dia PVC waste pipe, and32 mm dia brass CP waste coupling complete all as specified and directed. |
| 106 | S&Fvitreous china wash hand basin in repair oval special type 510x410mm including CP fancy type 15 mm pillar taps including 32mm dia PVC waste pipe, and32 mm dia brass CP waste coupling complete all as specified. |
| 107 | S&F Shelf glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified anddirected. |
| 108 | S&F Soap dish brass chromium plated fixed with chromium plated brass screwscomplete all as specified and directed. |
| 109 | S&F PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all asspecifiedand directed. |
| 110 | M&L for providing and fixing Designer PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T- section of sizes 1\"x1\" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2\"x2\"(600x600mm). the aluminium frame work is supported from the ceiling with the help of \"J\" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminium framework is supported on side wall withthe use of aluminium L-section of size 1\"x1\"(25x25mm) angles etc. complete as specified by manufacturer & drawing and directed by GE. |
| 111 | S&F hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and as directed. |
| 112 | S&F curtain rails stainless steel with fancy type golden coloured bracket complete all as specified and directed. |
| 113 | E/M Items:-M & L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 25Sqmm 04 core laid in trench/pole/on wall completer all as specified and as directed. |
| 114 | M&L for sand cushioning for protection of underground cable, consolidatedand compacted with clean dry sand complete all as specified and directed. |
| 115 | M&L well burnt old size sub Class ‘B’ bricks, laid flat,in trenches for cable protection complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | M&L for 40mm dia GI pipe Light grade with all necessary fittings laid in trenches, fixed to wall/pole/under road/floor etc for cable protection complete all as specified and as directed. |
| 117 | S&F steel water tubes medium grade galvanised with all fittings laid in trenches bore of tube 15 mm complete all as specified and directed. |
| 118 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed for the followings: - |
| 119 | One light point/ Bell/ one fan point controlled by one switch |
| 120 | One 3 pin socket outlet, 6 Amp on the same board with other switches |
| 121 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed. |
| 122 | S&F Switch piano, flush type single pole, one way 6 Ampcomplete all as per specified and directed. |
| 123 | S&F Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single poleMCB 20Ampcomplete all as specified and directed. Make ABB/Legrand/Scheinder |
| 124 | S&F Sheet metal enclosure powder coatedfor MCB DB double door single pole & Neutral 4 way with 200Amp ratedcommon bus bar at incomming complete all as specified and directed.Make:- Legrand/havells/L&T/ABB. |
| 125 | M&L for earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below normal ground level with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanised iron earth strip 32x6mm by means of bolts, nuts and washers and check nuts of galvanised iron or steel GI earth strip protected by 40 mm medium grade galvanised iron pipe including of 20 mm dia medium grade GI water tubing sheet metal 4mm wire mash funnel, charcoal or coke and common salt in paint and testing on completion all as shown on electrical plate No.3 of SSR Part-I. including taking out unserviceable one and necessary earthwork complete all as specified and directed. |
| 126 | M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC casing capping complete all as specified and directed.Make :Polycab/Finolex/KEI.Note: For concealed sub-main wiring cutting chases will be included in quoted rate) |
| 127 | S&F Exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and wire mesh with aluminium based frame (as approved by GE)including antidust painting complete including making a holes in wall as required size, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed. |
| 128 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including cutting of wall complete all as specified and directed. |
| 129 | S&F in replacementMCB \"C\" series Single pole and neutral 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. |
| 130 | S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. complete all as specified and as directed. Make: Racold/Bajaj/Havells/USHA. |
| 131 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 132 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10/9 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 133 | S&F Switch socket combination 2 in 1, 6A flush type complete all as specified and directed. |
| 134 | S&F Switch socket combination 6A/16A, 5 in 1, flush type flush type complete all as specified and directed. |
| 135 | S&FCeiling rose, 3 way PVC insulated body complete all as specified and directed. |
| 136 | Supply, installation,testingand commissioningof silent Diesel Engine Generating set 415 volts 15 KVA / 12 KW -phase, 0.95 power factor 50 Hz, 1500 RPM@ 21.5 BHP at NTP with electronic governor, self excited self regulated brushless AC generator installed including accoustic enclosure suitable for ambient condition at Bengdubiand confirming to condition under engine as per IS:10001/ 10002 and Alternator as per IS: 13364, BS 5514/2613/5000ISO 8526/3046 Trolly mounted with the following:- |
| 137 | (i) The capacity of Generator set shall be net after all due derating factors as per relevant ISI standard.(ii) The quoted rate shall be deemed to be inclusive of first fill of oil and final successful acceptance test.(iii) The quoted rate shall be deemed to be inclusive of 12 hours test run at site including one hour on 10% overhead in presence of representative detailed by accepting Officer, all arrangements are to be made by the contractor for tests. |
| 138 | (A). Alternator :-Standard design alternator rated at 15 KVA net output at site after considering deratings as per site conditions at 0.95 (lag) power factor AC,3 - phase 4 - wire 415 volts 50 Hz, 1500 RPM, self exicited ,self regulated screen protected ,drip proof IP 23 enclosure ,brushless design with winding in pole faces, insulating class \"H\" and voltage regulation of± 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 2613/5000 and shall be in position to generate supply with frequecy regulation with in ± 1% tolerace. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/5000/ IS - 4722 with the followings:-(i) Insualation class - \"H\"(ii) Temparature rise Class - \"H\"(iii) Excitation : Self Excited (iv) Regulation performance: The voltage is kept constant with ± 1%, manual voltage adjustment within ± 5% .(v) Frequency regulation ± 1%Make : Stamford/Crompton Greaves/ Ashok Leyland |
| 139 | (B) Diesel Engine: - Adequate capacity of Diesel engine suitable for 15 KVA coupled driveindependently above alternator and after considering derating as per site conditons after generating and reducing power consumed by accessories ,directly coupled through flexible coupling ,multi cylinder multi stroke direct injection,cold starting 1500 RPM, as per relevant ISI/BS - 5514 with an overload capacity of 10% for one hour in 12 hours, continuous running complete with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under.(i) Fly wheel with housing (ii) Cooling system :- Mounted radiator with fan & belts.(iii) Cooling Water pump : - Centrifugal type belt driven. (iv) Exhaust System :- Exhaust System complete with exhaust piping of suitable as per manufacturer and standard withwith MS pipe light grade upto and away two meters hight from top of enclosure including angle iron frame supports from floor to the bottom of exhaust pipe from the enclosure covered with mineral wool of thickness 50MM wrapped with chicken wiremesh of size 2.25 mm and aluminium sheet of 24 SWG to be complete with within the enclosure for safe exhaust without transfering vibration to the walve of the enclosure.(v) Exhaust gas turbo charger type (vi) Exhaust manifold (vii) Silencer : Residential type BellowsMake : Kirloskar/ Cummins/ Ashok Leyland |
| 140 | iv) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch/ nozzles/ governer electronic type capable for 1% speed /frequecy regulation with Fuel filters and Fuel hosesv) Lub oil System :-Lub oil system shall be comprising with the Lubricating oil filter,Lubricating oil, pumpvi) Air Intake System :- Air Intake System shall be comprising with theAir intake Manifold and Air cleanler dry typevii) Starting System :- Electric Self starter with maintenance free batteries includingbattery charging alternator. |
| 141 | viii) Batteries :-1 Nos. Batteries of 12 VOLT 80 AH capacitycomplete with copper conductor multi stranded leads of suitable length fromself starter to the battary terminals complete with initial charge and initial fill of electrolite complete all as specified of Make as Proudced by original DG Set Manufacturer with the followings:-ix) (a) Starting System shall also comprising with Starter gear ring & Start and stop push button(b) Handling and operation : Salient features of accessories shall be with Radiator with blower fan,Corrosion inhibitor coolant,Paper element filters for fuel, lub oil and by pass & Fly wheel housing and fly wheel. |
| 142 | x)Generator Monitoring Panel: Comprising ofthe following (a) Cumim & power command ® PCC-1301 micro processor based integrator generator set monitories metering protuction and control system with built torque matched volts /H3 over load current.b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) c). Alternator protection parameters like under voltage, over current, under frequency, over frequency ( alarm & shut down)d). Relay drivers for remote annuciationse). Cyclic cranking f). Auto/manual start/ stop g) Alternator trim adjustment from the front key pad h). operates within a temperature range 0- 50 degrees C) and humidity upto 95% j). Genset metering parameters like lube oil pressure, coolant temperature, engine speed(rpm), run hours, DC voltage, inake manifold temperature, 3 phase volts and 3 phase amperes, frequeny, KW, KVA, power factor |
| 143 | xi) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine.xii) Coupling arrngement : - Flexiable coupling, fly wheel to suit flexiable coupling fly wheel housing.xiii) Accessories :- AVM Pads built or separately mounted to manufactuer base frames.xiv) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes. |
| 144 | xv) Fuel Tank :- Inbuilt service fuel tank of capacity for Eight Hrs continuesmade out of 3 mm thick HR sheet top and bottom with caliberated level indicating arrangement, stop cock, drain plug, fuel pump of suitable capacity complete on a common base within the acoustic enclosure is inclusive of the cost of DG set and is as per manufactures design.xvi)Deliverable :- confirms the norms stablished like CPCB. |
| 145 | (c). Auto Main Failure(AMF): Microprocessor based Cubical panel outdoor type made out of CRCA sheet of 2 mm thick conforming to IS 8623 totally enclosed dust and vermin proof with front and rear openings of 415 Volts, 3 phase , 4 wire, AC 50 Hz having copper bus bar capacity requiredto carry current at 110% load of 12 KW / 15 KVA DG set with three phase and half neutral colour coded, prewired with copper cable of suitable size all as per standard practice of manufacturer specifications with the following accessories. All controls indicators and standard fitting shall be as follow:- |
| 146 | a) Digital Ammeter with selector switch of suitable capacity with CTs - b) Digital Volt meter with slector switch- c) Digital Frequency meter - d) Digital KW meter - e) Digital KWH meter panel mounted type-f) Digital PF meter - Functions:- Supply Failure Timer, Restoration Timer & 3 Impulse automatic engine Start / Stop logic Annuciation with indication LED lamps for : (i) Low lub oil pressure. (ii) High Water Temparature. (iii) Engine over speed. (iv) Battery low voltage. Controls :- a) Load on Indication b) Load off indication c) Engine start push button d) Engine stop push button e) Fault accept / reset push button |
| 147 | Battery Charger :SMPS based unit with inbuilt auto/manual & float / boost facility (i) DC Volt meter(ii) DC Ammeter(iii) Charger rate selector switch.Protection :-(I)Over load relay- 01 No(ii)Earth fault Relay - 01 No (iii) Under Volt release- 01 No. |
| 148 | D.Acoustic enclosure: Enclosure is free standing floor mounted factory built and modular in construction to facilitate easy assembly at work site and will be drop over housing type. It will consist of acoustically treated panel housed in sheet steel will provide easy access for maintenance, repairs and operation. The enclosure is custom built to suit conditions, with the following features:-i) Custom built product for various equipments, with ensure the optimum performance without duration.ii) Rugged in construction maintenance free and modular designs which facilitate easy at site.iii) 16 SWG (1.6 mm) thick CRCA sheets to be used for enclosure panel to ensure longer life against weathering action. High quality acoustic insulation materials to be used as per IS 8183 for maximum sound absorption. Acoustic layers are supported by perforated sheetsiv) Sheet metal components of the enclosure should undergo various stages of surface treatment prior to painting which leads to be better life of the enclosure against weathering action.v) Special paint treatment with pure polyester powder / epoxy to be provided for better weather resistance.vi) Well designed ventilation system to be provided to pump up the heat in the chamber efficiently.vii) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used.viii) Working space is to be provided around the equipment for easy maintenance / repairs.ix) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. x) A see through transparent window (glass or acrylic) in front of engine panel to provided for monitoring the operation.xi) Ducting if required, bellows, mechanical hardware like locks, hinges fasteners etc to be provided.xii) Deliverables. 75 dBA @ 1mtr at 75% load under free field conditions. The temp inside the enclosure will be within 70cabove ambient temp.xiii) The enclosure should be provided with bulk head light fitting for inside illuminationxiv) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulatedplat form.xv) The DG Set should be provided with external Emergency stop push button.xxvi) The accoustic enclosure parts shall be of powder coated after pre treat ment process. The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade. |
| 149 | Make of AMF panel DG Set OEM make of Accoustic enclosure : DG set OEMOEM DG Set : M/s Powerica/ M/s Sudhir/ M/s Jackson/Authorised OEM for Cattor Piller. |
| 150 | The following itmes are deemed to be included in the rate quoted forDG sets:- (i) DHPP for testing purpose shall be supplied by the contractor with out any extra cost to Govt (ii)The contractor shall will arrange for artificial load for testing for final testing of DG Set at site(iii)Testing of sound level should be carried out at the site in presence of GE. (iv)Rubber matting :- 12mm thick of size 1 meter x 2 meter rubber mat having chequrred finesh in top ISI marked 1100 Volts grade and each shall be laid in front of control panel and DG Set.(v)Documents :Standard Documents as per manufactureer specifications such as maintenance & operation, mannual parts, catalogues, display chacts such as maintenance and oil change chart/board etc. |
| 151 | (Note : The Scope of Work contained in \"Sch of Credit\" amounting to Rs. 1,66,630.00 (refer Tender Srl Page No 35). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’ |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
