Military Engineer Services-MES has published Tender For Repair/Maintenance Of Work Wooden Furniture Steel Furniture Including Painting And Polishing Of Items At Mil Stn Suranussi Under Age (I) Suranussi. Submission Date for this Tender is 25-03-2024. Painting Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-03-2024 |
| Sl. No. | Item Description |
| 1 | REPAIR & PAINTING TO CHAIR CB STEEL WITH ARMS Removing of old unserviceable bottom seat and S&Fnew seat of teak woodof adjusting size duly canned and polished with nut and bolt complete all asspecified and directed. FD-75(M) |
| 2 | All as per Srl item No 1 above but back of Seat. FD-75(M) |
| 3 | Removing of old unserviceable arms and S&Fnew arms rest ofteak woodincludingpolishing completeall as specified and directed. FD-75(M) |
| 4 | M & L for Painting of one coat of synthetic enamel paint OGto chair complete incl preparation of old painted surface complete all as specified and directed. FD-75(M) |
| 5 | S&Fmild steel flat iron 15 x 3x 500mm at front and rear side for stay of seats with two holes forfixingof seat duly welded and painted with two coats of syntheticenamel OG paintover a coat of red oxide primer complete all as specified directed. FD-75(M) |
| 6 | M&L replacement of PVC caps on 25mm conduit pipe of chairs complete all as specified and directed FD-75(M) |
| 7 | REPAIR & PANTING TO CHAIR CB STEEL WITH OUT ARMS Removing of old unserviceable bottom seat and S&Fnew seat of teak woodof adjusting size duly canned and polished with nuts, and bolts, complete allas specified and directed. FD-75 |
| 8 | All as per Srl item No. 7as above but back of seat FD-75 |
| 9 | M & L for painting of one coat of synthetic enamel OG painting to chair complete incl preparation of old painted surface complete all as specified and directed. FD-75 |
| 10 | S&Fmild steel flat iron 15 x 3 x 500mm at front and rear side for stay of seats with two holes for fixingof seat duly welded and painted with two coat of syntheticenamel paint over a coat of red oxide primer complete all as specified anddirected. FD-75 |
| 11 | S&F in replacement PVC caps on 25mm conduit pipe of chairs complete all as specified and directed. FD-75 |
| 12 | REPAIR & PAINTING TO TABLE 900X600X760 MM STEEL WITH ANDWITHOUT DRAWERRemoving of Unserviceabletopof thetableandS&F new topof thetablemade out of 18mm thickpre-laminated Partical Board natural teak shade including 3mm thick teak wood edging completeall asspecified & directed. FD-1007. Make: Century/Greenply/Action Tesa |
| 13 | Removing of oldunserviceablelegs /stiffenerandS&F newlegs / stiffenerout of25mmsq tube1.6 mm thickand fixingin position complete all asspecified and directed.FD-284/55/223/42/221/1007 /1008 |
| 14 | M&Lfor painting of tablewith drawer with one coatof synthetic enamel paint overa coat ofcomplete all as specified and directed.FD-1007 |
| 15 | Repair to broken drawer complete all asshown on Drg and specified and directed.FD-1007 |
| 16 | S&Fhard rubbershoeof best approvedquality (as per existing size) specified and directedFD-1007 |
| 17 | REPAIR & PAINTING TOALMIRAH STEEL LARGERemoving of old unserviceable shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixingin position complete all as specified and directed. FD-1031 |
| 18 | Removing of old unserviceable / broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and specified and directed. FD-1031 |
| 19 | Removing of old unserviceable locks and S&F new locks to steel almirah large. FD-1031 Make:Godrej/Harrison |
| 20 | All as per Srl item No 17 above but CP handle (as per existing size) FD-1031 Make:Godrej/Harrison |
| 21 | Removing of old unserviceable paints and painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all asspecified and directed. FD-1031 |
| 22 | REPAIR & PAINTING TOALMIRAH STEEL MEDIUMRemoving of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheetshelves andfixingin position complete all as specified and directed. FD-1032 |
| 23 | Removing of old unserviceable / broken legs and S&Fnew legs out of 1.00 mm thickPBI Sheet completeall as shown on drg and specified and directed. FD-1032 |
| 24 | Removing of old unserviceablelocks and S&F new lockstosteel Almirah medium. FD-1032.Make:Godrej/Harrison |
| 25 | All as perSrl item No 22abovebutCP HandleMake:Godrej/Harrison |
| 26 | Removing of oldpaintsandpaintingof steelAlmirah medium with two coatsof synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and directed. FD-1032& 109 |
| 27 | CHAIR EASY Replacement of old unserviceable legs with new Shisham wood legswell seasonedfree from shakeand knots complete all as per drg, as specified and directed FD-17/229/1108 |
| 28 | All as per Srl item No 27abovebut side/front/rear rails of cane seat with 3mm dia hole for Recanning. FD-17/229/1108 |
| 29 | All as per Srl item No 27 abovebutback bottomsize- 480 x20 x100mm. FD-17/229/1108 |
| 30 | All as per Srl item No 27 here-in-before butstiffener of sizes50 x 25 x 500mm. FD-17/229/1108 |
| 31 | All as per Srl item No27 here-in-beforebut arms of size asshown on drg. FD-17/229/1108 |
| 32 | M&L formelamine polishing to chair easy complete all as per drg,as specified and as directed. FD-17/229/1108 |
| 33 | Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified. FD-17/229/1108 |
| 34 | TABLE CENTRE Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak wood edging all roundcomplete all as per drawing, as specified and as directed FD-377/274. Make: Century/Greenply/Action tesa |
| 35 | Replacement of old unserviceablelegswith newShishamwoodleg wellseasoned free from shakes and knotscompleteallas per drg and as directed and as specified. |
| 36 | All as per Srl item No 34 abovebut long rail. FD-377/274 |
| 37 | All as per Srl item No 34 abovebut short rail. FD-377/274 |
| 38 | M&L for melamine polishing to tablecentre complete all as shown on drg, as specified and as directed FD-377/274 |
| 39 | TABLE PEG Replacement of old unserviceable top byproviding new top of 18/19mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak wood edging all roundcomplete all as directed, asspecified and as shown on drawing.FD-384/236 |
| 40 | Replacement of old unserviceablelegswith newShishamwoodlegs well seasoned free from shakes and knotscompleteallas per drg and as directed and as specified.FD-384/236 |
| 41 | All as per Srl item No 39 above butlong rail. FD-384/236 |
| 42 | All as per Srl item No 39abovebut short rail.FD-FD-384/236 |
| 43 | M&L for melamine polishing to tablepegcomplete all as shown on drg, as Specified and as directed.FD-384/236 |
| 44 | TABLE DINNING6 Person Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak woodedgingaroundcompleteall as shown on drg as Specifiedand as directed FD- 30,273, 239 & 1115 |
| 45 | Replacement of old unserviceable leg with new shisham woodleg well seasoned free from shakeand knots complete as perdrg, as specified and as directed. FD-30,273, 239 & 1115 |
| 46 | All as per Srl item No 44 above but top long rail.FD-30,273, 239 & 1115 |
| 47 | All as per Srl item No 44 above but top short rail.FD-30,273, 239 & 1115 |
| 48 | M&L for malemine polishing of table dinning for 6 persons complete as shown on drg, as Specified and as directed. FD-30,273, 239 & 1115 |
| 49 | CHAIR DINING Removing of old unserviceable front leg & S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, as specified and as directed. FD-1105,279 & FD-22 |
| 50 | All as per Srl item No 49 here in before but rear leg -ditto-FD-1105,279 & FD-228 |
| 51 | All as per Srl item No 49 abovebutside /front /rearrailsof caneseat with3mmdiaholefor re-canning FD-1105,279 & FD-22 |
| 52 | All as perSrl item No 49 here-in-beforebutstiffener -ditto- FD-1105,279 & FD-22 |
| 53 | M&L for malemine polishing of chair dinning complete all as per drg, as specified and directed. FD-1105,279 & FD-22 |
| 54 | Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified FD-1105,279 & FD-22 |
| 55 | TABLE 900 X 600 X 760 MM WITH OR W/O DRAWERS WOODEN Replacement of old unserviceable top by providing new 18/19mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak woodedgingallroundcompleteall as shown on drg as specified and as directed. FD-223, 224 |
| 56 | Replacement of old unserviceableleg with Shisham woodleg wellseasonedfree from shakesand knots all as per drg, as specified and as directed. FD-223, 224 |
| 57 | All as per Srl item No 55abovebuttop long rail FD-223, 224 |
| 58 | All as per Srl item No 55 abovebuttop short rail. FD-223, 224 |
| 59 | All as per Srl item No 55 abovebutstiffener. FD-223, 224 |
| 60 | Replacement of old and broken drawers of table by providing newdrawers completeall as per drgand specified and as directed made out of18/19mm thick pre-laminated particle board natural teak shade atthe sides andthe bottom of the drawers shall be of 6mmplywood commercial type complete duly fitted with fancy type approved knobs completeall as specifiedand as directed and as shown on drawing. FD-223, 224 |
| 61 | M&L for melamine polishing to table900X 600X760mmwithout or with drawer complete all as specified, as directed and as shown on drawing. FD-223, 224 |
| 62 | TEAPOY Replacement of old unserviceable top by providing new top of18/19mm thick pre-laminated Partical Board natural teak shade including 3mm thick teak wood edging all-roundcomplete all as per and as directedFD-278/382 |
| 63 | Replacement of old unserviceable legswith newShishamwoodlegs duly smoothed, size and shape as shown on drg,asspecified and as directed. FD-278/382 |
| 64 | All as per Srl item No 62 abovebut long rail. FD-278/382 |
| 65 | All as per Srl item No 62 above but short rail. FD-278/382 |
| 66 | M&L formelamine polishing to tableTeapoycomplete all as shown on drg, as Specified and as directed FD-278/382 |
| 67 | BED PLYWOOD TOP Removing of old unserviceable head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood including 4 Nos FMN clamps and polishing complete all as specified as shown on drg and as directed FD-246 |
| 68 | All as per Srl item No 67 above but foot board complete. FD-246 |
| 69 | Removing of old unserviceable long rail and S&F new Shishamwood long rail of suitable size complete all as shown on drg and as specified and as directed FD-246 |
| 70 | Removing of old unserviceable top and S&F new top of 12mm thick ply wood commercial with screws as directed by Engr-in-charge. Plywood shall be ISI marked and shall be of Make - Duraply/Kitply/Century/Greenply/Archid.FD-246 |
| 71 | S&F in replacement MS clamps of size 40mm width x4mm thick x 300mm long manufacturing in L shape incl 2 holes on both sides for fixing to locking the head/foot board with long rails complete all as specified and as directed FD-246 |
| 72 | CHAIR VARANDAH Recanning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to Chair Varandah complete all as specified and directed (Painting to chair will be carried out before recanning) FD-256 |
| 73 | S&F hard rubber shoes suitable for chair Varandah complete, all as specified and directed. FD-256 |
| 74 | M&L for welding to Chair Vareandah where required n.exc 2.5cm in length complete all as specified and directed. FD-256 |
| 75 | CHARPOY GI PIPE WITH PLYTOP (Drg No FD-220) S&F in replacement, long rail, 1.88 m long made out of 32mm dia,GIpipe,mediumgrade,cuttorequiredlength, threading both ends and including taking out old unserviceable long rail from GI charpoy frame complete all as specified. |
| 76 | Fixing only,in replacement, short rail, 0.815 m long made out fromoldlongrail32mmdia,retrievedfromSrlitemNo75 here-in-beforeincludingcuttingandthreadingbothends& fixinginpositionincludingtakingoutoldunserviceableshort rail from GI charpoy frame complete all as specified. Note:-LongrailsretrievedfromSrlItemNo75shallbe converted into two short rails and credit recovered for balance unservicable pipe. |
| 77 | S&FGIchecknut dulythreaded(ISImarked)suitablefor 32mm dia GI pipe includingtaking out old unserviceable elbow from GI charpoy frame complete all as specified. |
| 78 | S&FGIelbow3waydulythreaded(ISImarked)suitablefor 32mm dia GI pipe includingtaking out old unserviceable elbow from GI charpoy frame complete all as specified. |
| 79 | S&Finreplacement12mmthickplywood,7ply,commercial BWRtype,size1980x900mm fixedwith10nosbolts& nuts includingwashers(3nosonlongrail&2nosonshortrail each)includingS&Fflatironstiffeners/supports3nosmade out of 40x4mm flat iron, 850mm long, welded to long rails,gap betweenrailsandplywoodtoptobefilledwith4mmthick 40mm wide , stiffeners/supports also to be fixed with plywood top with 2 nos bolts & nuts provided to each stiffeners/supports including painting to mild steel work with synthetic enamel paint black, tightening of check nuts, elbows, rails, legs etc complete all as specified. |
| 80 | BEDHARDSTEEL(Drg.NoFD/E6/MAP/08(R)&Similar Drawings) Takingoutexistingbrokenplywoodfromthebedhardby loosening the nut bolts with washers and Supply and fixing new 12 mm thick BWR grade plywood fixed to bed hardframe with new GI Nut, bolts complete all as specified. |
| 81 | Taking out existing broken head board from bed hard steel and Supply and fixing new head board (shown all as per drg) made out of MS square pipe of size 38mm x 38mm square pipe (18 Gauge),size18mmx18mm(18Gauge),25mmx65mm(18 Gauge)and25mmx25mm(18Gauge)incl18mmthick exteriorgradeprelaminatedparticleboardinteakshadeor any shade approved by GE with 4mm thick teak wood beading inmatchingshadewithnewscrewsandalsoincludingone coat of red oxide primer and painting the steel frames with one ormorecoatofsyntheticenamelpaintblackcompleteall as specified. |
| 82 | Taking out existing broken foot board from bed hard steel and Supply and fixing new head board (shown all as per drg) made out of MS square pipe of size 38mm x 38mm square pipe (18 Gauge),size18mmx18mm(18Gauge),25mmx65mm(18 Gauge)and25mmx25mm(18Gauge)incl18mmthick exteriorgradeprelaminatedparticleboardinteakshadeor any shade approved by GE with 4mm thick teak wood beading inmatchingshadewithnewscrewsandalsoincludingone coat of red oxide primer and painting the steel frames with one ormorecoatofsyntheticenamelpaintblackcompleteall as specified. |
| 83 | Spray painting all steel surface with existing shade and colour orasapprovedbyGEafterapplicationofsandpaperand grinder to make thesurface smoothand evenover red-oxide primer complete all as specified and directed. |
| 84 | Material & Labourfor rubber shoe of approved quality to bed hard steel including Opening of and removal of old unsv shoe complete all as specified and directed by Engr-in-Charge. |
| 85 | Supply and fixing of stiffeners made of Square pipe 25 mm x 25 mm (18 Gauge) size including taking out the old unsv parts includingonecoatofredoxideprimerandpaintingthesteel frames with one or more coat of synthetic enamelpaint black/olive green complete all as specified and directed by the Engr-in-Charge. |
| 86 | Material&LabourforreplacementlongrailmadeoutofMS squarepipeof25mmx65mm(18Gauge)sizeallasper mentioned in drg including painting with two coats of synthetic enamelpaintoveracoatofred oxideprimer completeall as specified and directed. |
| 87 | CHARPOY IP HARD TOP (Drg.NoFD/MAP-II/01) Takingoutexistingbrokenplywoodfromthe charpoy IP by loosening the nut bolts with washers and Supply and fixing new 12 mm thick BWR grade plywood fixed to Charpoi IP frame with new GI Nut, bolts complete all as specified. |
| 88 | Taking out existing broken legs from Charpoy IP steel and Supply and fixing new legs (shown all as per drg) made out of MS square pipe of size 32mm x 32mm square pipe (18 Gauge), withnewscrewsandalsoincludingone coat of red oxide primer and painting the steel frames with one ormorecoatofsyntheticenamelpaintblackcompleteall as specified. |
| 89 | Supply and fixing of stiffeners made of Square pipe 25 mm x 25 mm (18 Gauge) size including taking out the old unsv parts includingonecoatofredoxideprimerandpaintingthesteel frames with one or more coat of synthetic enamelpaint black/olive green complete all as specified and directed by the Engr-in-Charge. |
| 90 | Material&LabourforreplacementlongrailmadeoutofMS squarepipeof25mmx65mm(18Gauge)sizeallasper mentioned in drg including painting with two coats of synthetic enamelpaintoveracoatofred oxideprimer completeall as specified and directed. |
| 91 | Material&LabourforreplacementshortrailmadeoutofMS squarepipeof25mmx65mm(18Gauge)sizeallasper mentioned in drg including painting with two coats of synthetic enamelpaintoveracoatofred oxideprimer completeall as specified and directed. |
| 92 | Spray painting all steel surface with existing shade and colour orasapprovedbyGEafterapplicationofsandpaperand grinder to make thesurface smoothand evenover red-oxide primer complete all as specified and directed. |
| 93 | REPAIR & PAINTING TOLOCKER STEELRemoving of old unserviceable shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixingin position complete all as specified and directed. FD-1029 |
| 94 | Removing of old unserviceable / broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and specified and directed. FD-1029 |
| 95 | Removing of old unserviceable locks and S&F new locks to steel almirah large. FD-1029 Make:Godrej/Harrison |
| 96 | All as per Srl item No 93 above but CP handle (as per existing size) FD-1029 Make:Godrej/Harrison |
| 97 | Removing of old unserviceable paints and painting ofLocker steel with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all asspecified and directed. FD-1029 |
| 98 | CHAIR WOODEN BOTTOM M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete. FD-225/56 |
| 99 | All as per Srl item No 98 here in before but rear leg |
| 100 | All as per Srl item No 98 here in before but front leg |
| 101 | All as per Srl item No 98 here in before but front/ side rails |
| 102 | All as per Srl item No 98 here in before but stiffner |
| 103 | Supply only cushion of foam size 500 x 525 x 100mm of density 32 with cover of cloth tapestry duly stitched, tapestry cloth should not be less than 135.00 per mtr Make Kurlon/sleep well.FD-225/56 |
| 104 | Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality qas approved by GE. FD-225/56 |
| 105 | Table office clerk steelS & F following parts of Table office clerk including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete as per drawing or as specified & directed by Engineer-in-charge. FD-84/381 |
| 106 | Lock 6 lever or brass with two keys |
| 107 | Table top made out of 18mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading around the top complete. |
| 108 | CHAIR VARANDAH (Drg No FD/E6/MAP/01 SHEET 1/1 Welding to leg joints any size, electric arc or gas welding, joints of welded portion finished smooth complete all as specified. |
| 109 | M&Lforbottom seat &Back replacementforchairvarndah includingremoving of old unserviceable bottom seat & back from the framecomplete all as specified. |
| 110 | M&Lforpreparationofoldsteelsurfacesofchairverandah andapplyingonecoatofsyntheticenamelpaint(white)with brushes complete all as specified. |
| 111 | CHAIR WRITING with cushion FD- 1107 Replacementof old unserviceablefrontleg by providing wellseasoned Shisham wood duly smoothed, size and shape as shown on drg,asspecified and as directed. FD-1107 |
| 112 | All as per Srl item No 111 abovebutrearleg. FD-1107 |
| 113 | All as per Srl item No 111 above but seat frame with cushion & S & F new seat frame with cushion bottom made of 1st class hard wood (Shisham) duly cane hole size and shape as shown on drg, as specified and as directed. FD-1107 |
| 114 | All as per Srl item No 111 above back seat frame with cushion & S & F new back seat frame with cushion bottom made of 1st class hard wood (Shisham) duly cane hole size and shape as shown on drg, as specified and as directed. FD-1107 |
| 115 | All as per Srl item No 111 here-in-before but stiffeners -ditto-FD-1107 |
| 116 | All as per Srl item No 111 here-in-before but arms. FD-1107 |
| 117 | M & L for malemine polishing of chair writingcomplete all as per drg, as specified and directed. FD-1107 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
