Tender For Estimate For Provide 14 No House Hold Connection In Habitation (Adiwasi Basti) At Village Lchoniya Under Pvtg Scheme At Rannod D/C Under O&M Dn Ii Shivpuri (75274) Estimate For Provide 10 No House Hold Connection In Habitation (Adiwasi Basti)At
Tender Value
3.49 Lakhs
Estimated cost
Bid Submission
14 Mar 2024
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rannod → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For Provide 14 No House Hold Connection In Habitation ( Adiwasi Basti ) At Village Lchoniya Under Pvtg Scheme At Rannod D / C Under O&M Dn Ii Shivpuri ( 75274 ) Estimate For Provide 10 No House Hold Connection In Habitation ( Adiwasi Basti ) At Village Bedmau Under Pvtg Scheme At Rannod D / C Under O&M Dn Ii Shivpuri ( 75311 )
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Mar-2024 | Corrigendum for date extend | Date | 14-Mar-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 2 | Labour Charge for installation (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 3 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 4 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 5 | Transformer Belting Set 50X50X6 MM Angle with Two cross fixing channel |
| 6 | 140KG 8 mtr long PCC Pole |
| 7 | Labour Charge for digging and erection of 140KG 8 mtr long PCC Pole for |
| 8 | LT XLPE cable arial Bunch 3x25+1x16+1X25 Sq mm with aluminium alloy bare messenger wire |
| 9 | Labour Charge for stringing of LT XLPE cable arial Bunch 3x25+1x16+1X25 Sq mm with aluminium alloy bare messenger wire |
| 10 | PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 11 | Labour Charge for PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 12 | XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 13 | Labour charge for XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 14 | AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 15 | Labour Charge for stringing AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 16 | 11 KV D.O. Fuse unit Polymer type |
| 17 | Labour Charge for fixing of 11 KV D.O. Fuse unit Polymer type |
| 18 | Stay Insulator 90X65 |
| 19 | 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 20 | Labour charge for 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 21 | D.O. Mounting Channel 75x40x6 mm |
| 22 | Labour Charge for fixing ofD.O. Mounting Channel 75x40x6 mm |
| 23 | 11 KV Composit Polymer Disc insulator |
| 24 | Labour Charge for fixing of11 KV Composit Polymer Disc insulator |
| 25 | 11 KV Strain Hardware (T&C type) fittings |
| 26 | Labour Charge for fixing of11 KV Strain Hardware (T&C type) fittings |
| 27 | 11 KV polymer Pin Insulator |
| 28 | ( Labour Charge)11 KV polymer Pin Insulator |
| 29 | 11 KV V Cross Arm 65x65x6 mm Angle type |
| 30 | Labour Charge for 11 KV V Cross Arm 65x65x6 mm Angle type |
| 31 | 11 KV top Clamp 65x65x6 mm Angle type |
| 32 | abour charge for 11 KV top Clamp 65x65x6 mm Angle type |
| 33 | D.C. Cross arms 8\" Center to center(100x50x6mm) channel |
| 34 | Labour Charge for fixing ofD.C. Cross arms 8\" Center to center(100x50x6mm) channel |
| 35 | Transformer mounting Channel (100x50x6 mm) |
| 36 | Labour Charge for fixing Transformer Mounting Channel (100x50x6 mm) |
| 37 | D.C. Cross arms 4\" Center to center(100x50x6mm) channel along with Disc & Hardware |
| 38 | Labour Charge for fixing ofD.C. Cross arms 4\" Center to center(100x50x6mm) channel |
| 39 | Horizontal and cross bracing 8\" center (50x50x6mm) along with Disc & Hardware |
| 40 | Labour charge for fixing of Horizontal and cross bracing 8\" center (50x50x6mm) |
| 41 | Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 42 | Labour charge for Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 43 | Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 44 | Labour Charge for fixing of Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 45 | Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 46 | Labour Charge for Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 47 | Meter instalation Structure (50x50x6 mm angle Type) for Kaccha house |
| 48 | Labour Charge for Febrication & instalation of Meter Structure (50x50x6 mm angle Type) for Kaccha House |
| 49 | Concreting of (50x50x6 mm) angle meter structure for kaccha house (0.05 cmt per structure) |
| 50 | Labour Charge for Concreting of (50x50x6 mm) angle meter structure for kaccha house(0.05 cmt per structure) |
| 51 | Stay set complete without Stay wire 16 mm (Painted) |
| 52 | Labour Charge for fixing ofStay set complete without Stay wire 16 mm (Painted) |
| 53 | Stay wire 7/3.15 MM (7/10 SWG) |
| 54 | G.I. Wires 3.15 MM (10 SWG) |
| 55 | G.I. Wires 4.0 MM (8SWG) |
| 56 | G.I. Strip 25x3 mm1 |
| 57 | Labour Charge for G.I. Strip 25x3 mm1 |
| 58 | G.I. Pipe 40 mm Dia c Grade type |
| 59 | Labour charge for G.I. Pipe 40 mm Dia c Grade type |
| 60 | Bentonite compound powder |
| 61 | Clamp for 140 KG PCC pole MS Flat 50x6 mm MS Flat ( 65x8 mm) |
| 62 | Back Clamp for 140 KG Pcc Pole MS Flat ( 50x6 mm) |
| 63 | Stone Block/Per cast block for base pedding(450x450x75mm) |
| 64 | Back Filling of pole with boulders |
| 65 | Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 66 | Labour Charge for Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 67 | Concreting of structure & amp foundation (1:3:6) |
| 68 | Labour Charge for Concreting of structure & amp foundation (1:3:6) |
| 69 | Meter cum protection box for 25 KVA DTR |
| 70 | Labour Charge for Meter cum protection box for 25 KVA DTR |
| 71 | Red oxide paint |
| 72 | Labour Charge forRed oxide paint |
| 73 | Aluminium paint |
| 74 | Labour Charge for Aluminium paint |
| 75 | M.S.Nuts and Bolts |
| 76 | Galvanized nut & Bolt with washar |
| 77 | Danger Board Enamelled 11 KV |
| 78 | Labour Charge forDanger Board Enamelled 11 KV |
| 79 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr. Lead of 4.0 MM G.I. Wire |
| 80 | Earthing for PCC pole 4.00 mm-8 SWG G.I. wire 0.8 KG per pole |
| 81 | jointing sleeves suitable for rabbit (55Sq.mm Al .Eq) AAAC conductor |
| 82 | Aluminium binding wire and tape |
| 83 | Miscelleaneous Charges For New Service Connection |
| 84 | MCB OF 16 AMP |
| 85 | PVC/Rubber Bushes |
| 86 | 3 pin 5A socket ( Two no piano type switch bulb bakelite holder with wiring & amp E) |
| 87 | Switch Board |
| 88 | Wooden Board 10\"\"x8\"\" |
| 89 | Rack Bolt/Screw |
| 90 | LED Lamp with 9 watt (Complete) |
| 91 | A.B Cable hanging clamps/ tension clamps (Galvanized) as perenclosed Drawing |
| 92 | Labour Charge for fixing of A.B Cable hanging clamps/ tension clamps (Galvanized) as per enclosed Drawing |
| 93 | SUSPENSION CLAMP FOR LT AB CABLE |
| 94 | Labour Charge for fixing ofSUSPENSION CLAMP FOR LT AB CABLE |
| 95 | Clamps for neutral for AB Cable |
| 96 | PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 97 | Labour Charge for PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 98 | PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 99 | Labour Charge for PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 100 | single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 101 | Labour Charge for installation single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 102 | SGST @ 9% |
| 103 | CGST @ 9% |
AI Tender Summary
Tender Timeline
Mar 12, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 14, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 14, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 14, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender