Invitation Of Rates For Piece Rated Works With Material For Remaining Works Of Raja Todermal Survey And Bhulekh Training Institute Hardoi U.P. As Per Nit And Tender Document , Dismantiling Existing Plaster Including Disposal Of Refuse As Directed By The Engineer-In Charge With In A Distance Of 50Metre , Dismantiling Stone Flagged Or Tiledfloor Including Base Concrete And Including Stacking Of Dismantled Material As Directed By The Engineer-In Charge With In A Distance Of 50Metre , Dismantiling Door & Window Leaves & Including Stacking Of Dismantled Materials As Directed By The Engineer-In-Charge With In A Distance Of 50 Mtr , Scraping Old White Or Color Wash Including Disposal Of Refuse As Direced By Engineer In Charge With In A Distance Of 50Meter , Cleaning Jungle Including Uprouting Of Trunk Vegetation Grass , Bush , Wood, Tries & Sapling Of Girth 30 Cm. Measured At A Height Of 1 Mtr Above Ground Level And Removal Of Rubbish Up To Distance Of 50 Mtroutside The Periphery Of Area Cleared , Providing & Laying In Cement Concrete 1 :2:4 ( 1 Cement :2 Course Sand: 4 Graded Stone Aggregate 40 Mm Nominal Size ) And Curing Complete, Including Cost Of Form Work In Foundations & Floors. , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With4.0 Mm Thick Glass Panes , Mild Steel Or Iron Work Of Heavy Sizes And Sections Such As Trusses Built Up Gates, Door Frames, Record Racks , Window Frames, Gatesetc. Wrought To Required From Including Drilling Reveting & Welding And Including Supply Of Steel Including Cost Of Bolts, Nuts If Required For And Welding, Grinding And Making Holes As Required Completion Of Work , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete.Fixed To Steel Windows By Welding , Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windowsand Clerestory Windows Using Wire Gauge With Average Width Of Aperture1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete With 12 Mm Mild Steel U Beading , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of ( 1 Cement: 6 Fine Sand ) , 12 Mm Thick Cement Plaster With Cement And Fine Sand Of 1.25 Fm Mortar In 1:6 , Kota Stone Slab Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approvedmake, In All Colours, Shades Except Burgundy, Bottle Green, Black Ofany Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Stepsand Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm Of Approved Brand And Manufacturer Over The Plastered Wall Surface To Prepare The Surface Even And Smooth , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade. New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 2.2 Kg / 10 Sqm ) .Asian, Burger Etc , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacturer To Make An Even Shade One Or More Coats On Old Work ( Royal, Silk, Asian , Burger Etc ) , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Steel Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. , Painting Or Varnishing On Iron Work In Small Areas Or New Wood Work With One Coat Of Ready Mixed Priming Paint And One Coat Of Ready Mixed Superior Quality Paint With Synthetic Varnish Including Supply Of All Material , Labor , T&P Etc Paint Should Be Conformed To I.S.I.-103 1950 Same As Above But For Every Coat After First Coat , Painting Or Varnishing On Iron Work In Small Areas Or New Wood Work With One Coat Of Ready Mixed Priming Paint And One Coat Of Ready Mixed Superior Quality Paint With Synthetic Varnish Including Supply Of All Material , Labor , T&P Etc Paint Should Be Conformed To I.S.I.-103 1950Same As Above But For Every Coat After First Coat , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc Complete :250X10 Mm , Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 250X16 Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete :125 Mm , Providing 1.5 Mm Thick Aluminium Sheet Over Door , Providing And Fixing Chromium Plated Brass Curtain Rod Having Wall Thickness Of 1.25Mm With Two Chromium Plated Brass Brackets Fixed With C.P. Brass Screws And Pvc Sleeves Etc., Wherever Necessary Complete : 25 Mm Dia , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portion Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is:1868, Minimum Anodic Coating Of Grade Ac 15 ) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, ( I ) Single Socketed Pipes110 Mm Diameter , Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron / Cast Iron ( Spun ) Pipe Embedded In And Including Cement Concrete Blocks 10X10x10 Cm Of 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , Including Cost Of Cutting Holes And Making Good The Walls Etc. For 100 Mm Dia Pipe , Earthwork In Excavation For Structures Including Setting Out Construction Of Shoring &Bracing Removal Of Stump Material And Disposal Up To A Lead Of 50 M. , Providing & Laying In Cement Concrete 1 :4:8 ( 1 Cement :4 Course Sand: 8 Graded Stone Aggregate 40 Mm Nominal Size ) And Curing Complete, Including Cost Of Form Work In Foundations & Floors. , Brickwork In 1:4 Cement And C. Sand Ofmortar In Foundation And Plinth Including Supply Of All Material , Labor, T&P As Required For Completion Of Work , 40 Mm Thick Marble Chips Flooring Rubbed And Polished To Granolithic Finish, Under Layer 34 Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size ) And Top Layer 6Mm Thick With White, Black, Chocolate, Grey, Yellow Or Green Marble Chips Of Sizes From 1 Mm To 4 Mm Nominal Size, Laid In Cement Marble Powder Mix 3:1 ( 3 Cement : 1 Marble Powder ) By Weight In Proportion Of 4:7 ( 4 Cement Marble Powder Mix : 7 Marble Chips ) By Volume, Including Cement Slurry Etc. Complete :Dark Shade Pigment With Ordinary Cement , Providing And Fixing Glass Strips In Joints Of Terrazo / Cement Concrete Floors.40 Mm Wide And 4 Mm Thick , Marble Chips Skirting Up To 30 Cm Height, Rubbed And Polished To Granolithic Finish, Top Layer 6 Mm Thick With White, Black, Chocolate, Grey, Yellow Or Green Marble Chips Of Sizes From Smallest To 4 Mm Nominal Size, Laid In Cement Marble Powder Mix 3:1 ( 3 Cement : 1 Marble Powder ) By Weight In Proportion Of 4:7 ( 4 Cement Marble Powder Mix : 7 Marble Chips ) By Volume : 18 Mm Thick With Under Layer 12 Mm Thick In Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) :Dark Shade Pigment With Ordinary Cement , 40 Mm Thick 1:2:4 Plain Cement Concrete Flooring ( 1 Cement :2 Coarse Sand :4 Graded Stone Aggregate Of 2 Cm In Size ) Without Base Concrete Uniform Finishincluding Supply Of All Materials , Labour T&P Etc Required For Proper Completion Of Work , Felling Trees Of The Girth ( Measured At A Height Of 1 M Above Ground Level ) , Including Cutting Of Trunks And Branches, Removing The Roots And Stacking Of Serviceable Material And Disposal Of Unserviceable Material Beyond 120 Cm Girth Upto And Including 240 Cm Girth , Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: ( B ) Providing And Laying Brick Bats With Mortar Using Broken Bricks / Brick Bats 25Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 ( 1 Cement: 5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 ( 1 Cement:5 Coarse Sand ) Admixed With Water Proofing Compoundconforming To Is : 2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm. , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources ) ( Beam ) , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing & Fixing White Vitereous Chinawater Closet Squatting Pan Isi Marked ( Indian Type W.C. Pan ) With 100Mm Sandcast Iron P Or S Trap, 10 / 12.5 Litrspvclow Level Flushing Cistern With Fittings &Brackets 40Mm Dia C.P. Flushpipe With Fitting & Clamps, 20Mm Overflow Pipe With Specials And Mosquitoproof Coupling Of Approved Municipaldesign, Painting Wherever Requiredincluding Cutting & Making Good Thewalls & Floors Where Required.Orissa Pattern W.C. Pan Of Size580x440mwith Integral Type Foot Restsflush Pipe And Over Flow Arrangement. , Providing & Fixing White Vitreous Chinawash Basin With C.I. Brackets Paintedwhite, 15Mm C.P. Brass Pillar Taps, C.P.Brass Chain With Rubber Plug, 32Mmc.P.Brass Waste Of Standard Patternincluding Cutting & Making Good Thewalls Wherever Required.A ) Flat Back Wash Basin Size 550X400 Mmwith Single 15Mm C.P. Brass Pillar Tap. , Providing And Fixing Flexible P.V.C. Wastepipe For Sink Or Wash Basin Including Pvcwaste Fittings Complete.A ) 32Mm Dia , Providing & Fixing 600X450mm Bevellededge Mirror Of Superior Glass ( Ofapproved Quality ) Complete With 6Mmthick Asbestos Cement Sheet Ground Fixedto Wooden Cleats With C.P. Brass Screwsand Washers. , Providing And Fixing 600X120x5 Mm Glass Shelf With Edges Round Off, Supported On Anodised Aluminium Angle Frame With C.P. Brass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs Etc., Complete. , Providing And Fixing White Vitreous China Laboratorysink With C.I Brackets. C.P Brass Chain With Rubberplug 40Mm C.P Brass Waste And 40 Mm C.P Brasstrap With Necessary C.P Brass Unions Completeincluding Painting Of Fittings And Brackets. Cutting And Making Good The Wall Wherever Required. Size 600X450x200mm , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Ofsize 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pipe, Spreaders Withunions And Clamps ( All In C.P. Brass ) With Waste Fitting As Per Is :2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittings And Cutting And Making Good The Wallsand Floors Wherever Requiredsingle Half Stall Urinal With 5 Litre P.V.C. Automatic Flushingcistern , Providing & Fixing Cp Brass Bibcock ( Tap ) Of Approved Qualityconforming To Is 8931 A ) 15Mm Nominal Bore , Providing & Fixing C.P. Brass Long Bodybib Cock Of Approved Quality Conformingto Is Standards And Weighing Not Less Than 690 Gmsa ) 15Mm Nominal Bore , Providing & Fixing C.P. Brass Angle Valvefor Basin Mixer And Gyser Points Ofapproved Quality Conforming To Is 8931A ) 15Mm Nominal Bore , Providing & Fixing C.P. Brass Stop Cock ( Concealed ) Of Standard Design And Ofapproved Make Conforming To Is : 8931.A ) 15Mm Nominal Bore , Providing & Fixing C.P. Brass Shower Rose & Shower With 15 Or 20Mm Inlet.A ) 100Mm Diamter , Providing And Fixing Ball Floating Valve ( Brass ) Of Approved Quality Complete. ( High Or Low Pressure With Plastic Floats ) .A ) 25Mm. Nominal Bore , Providing And Placing On Terrace Polyethylene Waterstorage Tank, Is : 12701 Marked, With Cover And Suitable Lockingarrangement And Making Necessary Holes For Inlet, Outlet And Overflowpipes But Without Fittings And The Base Support For Tank.Capacity1000 Litre ( 5Nos ) , Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : ( B ) Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia , Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 ( 1 Cement : 1 Fine Sand ) Including Testing Of Joints Etc. Complete :100 Mm Diameter 150 Mm Diameter , Providing And Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design : 100 Mm Diameter S.W. Pipe150 Mm Diameter S.W. Pipe , Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size ( Inside ) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design:150 X 100 Mm Size P Type With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 , Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With R.C.C. Top Slab With 1:1.5:3 Mix ( 1 Cement : 1.5 Coarse Sand ( Zone- Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) , Foundation Concrete 1:4:8 Mix ( 1 Cement : 4 Coarse Sand ( Zone- Iii ) : 8 Graded Stone Aggregate 40 Mm Nominal Size ) , Inside Plastering 12 Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Designinside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame ( Light Duty ) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg ( Weight Of Cover 23 Kg And Weight Of Frame 15 Kg ) :With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 , P&F Sand Cast Iron Jali Grating For Gully Trap 100Mm Diamter , Providing And Fixing Soil, Waste And Vent Pipes : 100 Mm Dia Sand Cast Iron S&S Pipe As Per Is: 1729 , Providing And Fixing Plain Bend Of Required Degree. 100 Mm Dia Sand Cast Iron S&S As Per Is - 1730 , Providing And Fixing Ms Holder Bat Clamps Of Approved Design To Cast Iron ( Spun ) Pipe Embedded In And Including Cement Concrete Blocks 10 X10 X10cm Of 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) Including Cost Of Cutting Holes And Making Good The Walls Etc. For 100Mm Dia. Pipe , Providing And Fixing Trap Of Self Cleansing Design With Screwed Downor Hinged Grating With Or Without Vent Arm Complete, Including Cost Ofcutting And Making Good The Walls And Floors :Making Good The Walls & Floors.100 Mm Inlet And 100 Mm Outlet Sand Cast Iron S&S As Per Is: 3989 Each 1512.55 , Providing & Fixing Sand Cast Iron Coller. 100 Mmsand Cast Iron S&S As Per Is - 1729 , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including Allcpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe Withclamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittingswith One Step Cpvc Solvent Cement And Testing Of Joints Complete32 Mm Nominal Outer Dia Pipes , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approvedquality ( Screwed End ) :32 Mm Nominal Bore , Providing And Fixing Ball Floating Valve ( Brass ) Of Approved Quality Complete. ( High Or Low Pressure With Plastic Floats ) .A ) 25Mm. Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.80 Mm Diameter , 80 Mm Diameter , 65 Mm Diameter , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : , 80 Mm Diameter , 65 Mm Diameter , Constructing Masonry Chamber 60X60x75 Cm, Inside In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Fire Hydrants, With C.I. Surface Box 350X350 Mm Top And 165 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand:10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : , Providing And Laying Non-Pressure Np2 Class ( Light Duty ) R.C.C. Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In The Proportion Of 1:2 ( 1 Cement : 2 Fine Sand ) Including Testing Of Joints Etc. Complete : 150 Mm Dia. R.C.C. Pipe , ( A ) Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame ( Light Duty ) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg ( Weight Of Cover 23 Kg And Weight Of Frame 15 Kg ) : With Sewer Bricks Conforming To Is : 4885 , ( B ) Inside Size 120X90 Cm And 90 Cm Deep Including C.I. Cover With Frame ( Medium Duty ) 500 Mm Internal Diameter, Total Weight Of Cover And Frame To Be Not Less Than 116 Kg ( Weight Of Cover 58 Kg And Weight Of Frame 58 Kg ) : With Sewer Bricks Conforming To Is : 4885 , ( C ) Extra For Depth For Manholes Size 90X80 Cm With Sewer Bricks Conforming To Is : 4885 , ( D ) Extra For Depth For Manholes Size 90X120 Cm With Sewer Bricks Conforming To Is : 4885 , Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan ) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. , All Kinds Of Soil Upto 1.5M Depth , All Kinds Of Soil Above 1.5M Depth , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) : 4 Graded Stone Aggregate 40 Mm Nominal Size ) , Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Slab , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:4 ( 1 Cement: 4 Coarse Sand ) , Providing M.S. Foot Rests Including Fixing In Manholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) As Per Standard Design : With 20X20 Mm Square Bar , S.C.I. Tee At The Inlet & Outlet Of Septic Tank , Providing And Fixing Soil, Waste And Vent Pipes : 75 Mm Sand Cast Iron S&S As Per Is - 1729 , Providing And Fixing Terminal Guard : 75 Mm Sand Cast Iron S&S As Per Is - 1729 , Providing And Fixing In Position Pre-Cast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Quality M D - 10 Circular Shape 500 Mm Internal Diameter L D- 2.5 Circular Shape 450 Mm Internal Diameter , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 , Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Piano Type Switch, Phenolic Laminated Sheet, Suitable Size M.S. Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Same As In Item No. 1 But For Fans Andfresh Air Fans ( Light Duty Fan ) . , Wiring For Group Controlled ( Looped ) Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Midium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Supply & Wiring Of Sub-Main With 2 Nos 4Sqm Fr P.V.C. Insulated 1100 Volts Grademultistand Single Core Copper Conductor Cable In20 Mm Diameter Heavy Duty 2Mm Thick P V C Conduit Partly Concealed In Wall And Partlylaid In Slab Along With The Reinforcementbefore Concreting Complete With Onenumber 2.5Sqmm Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Continuty Drawn In Conduit Complete In All Respects. , Supply & Wiring Of Sub-Main With 2 Nos 4Sqm Fr P.V.C. Insulated 1100 Volts Grademultistand Single Core Copper Conductor Cable In20 Mm Diameter Heavy Duty 2Mm Thick P V C Conduit Partly Concealed In Wall And Partlylaid In Slab Along With The Reinforcementbefore Concreting Complete With Onenumber 2.5Sqmm Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Continuty Drawn In Conduit Complete In All Respects.Same As In Item No 7 But With 4 Nos.10 Sqm.M32 Mm Dia. , Constructionof Recess Distributionboard ( Swich Board ) Of 600Mm X 480Mm X 200Mm Sizesincluding Cutting Of Brick Work Providinglintel Ofsuitable Size& Thicknessplastering Etc.With Supply Of All Materials , Labours, T&P, Etc. Req.For Proper Completion Of Work. , Supply & Fixing Of Fabricatedm.S Box Inexiting Sunk With Godrej Type Almirah Coverwith Handle Etc. Fabricated From 18 Swgm.S Sheet Duly Painted With Red Oxideprimer Follwed By Two Coats Syntheticenamel Paint Completewith Necessaryconduit Entry A600x480x200mm , S / F Of Surface / Flush Mounting 4 Ways Tpndistribution. Board With Addutional Metal Door Without Mcb Complete In All Respect As Directed At Site.Cat A , Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length ( Upto 30 Cm ) With 1.5Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required.Complete In All Respects. , Installation Of Exhaust Fan In The Existing Opening , Including Making Good The Damage, Connection, Testingcommissioning Etc. As Required. , Supply & Fixing Of Power Plug With15a / 250V Flush Type Switch Type Socketin Suitable M.S. Box Of 175 Mm X 100 Mmx 50 Mm Size Bakelite Sheet Machinescrews & Cup Washers. , Add For Fixing Of Tube Fitting As Pendentwith Two Number19 Mm Dia. 16 Gaugerigid Steel Conduit Double Checknuts.Spring Loaded Flanges Or M.S. Hookfabricated From25 Mm X 3 Mm Flat Ironduly Grouted In The Ceiling Upto3.5 Heightof Ceiling, Including Painting With Synth-Eticenamel Paint. Alongwith Supply Ofall Materials, Labour, T & P Etc. Requiredfor Proper Completion Of Work. , Supply And Fixing Of Led Tube Light With Metal Heavy Duty Box Type Batten Light Fitting 1X22 Watt Suitable For Upto 1X22 Watt Led Polycarbonate Tube Light Complete Including Tube Suitable For Both Surface & Suspended Complete In All Respect.Category Aaa , Supply And Fixing Of Recess / Surface / Pendent Mounting Round 10 To 15 Watt Led Down Lighter Having Powder Coated Die Cast Aluminum Housing With Heat Sink , Diffuser / Reflecter And Driver Set Complet In All Respect Cat Aaa , Supply & Laying Of Aluminium Conductorpvc. Insulated Armoured, Served, Sheath-Ed Cable 1100 Volts Grade At 750 Mmbelow Ground Level Over A Cushion Of75 Mm Thick Sand Around & Protectedwith Brick On Sides & Top On Surface Thecable Run Shall Be Fixed On M.S. Clampsetc.Of Suitable Size Complete In Allrespect. The Armouring Of The Cable Shall Be Properly Connected With Theearth Conductor By Clamps Etc.35 Sq Mm 3 1 / 2 Core , Supply & Fixing Of Factory Wired Hpf Box Type Fluorescent Tubelight Fitting Suitable For 1X40 Watts Fluorescent Tubes Including Tubes Etc On Surface Complete In All Respect , S / F Of Ceiling Fitting Made Of Brass Fixed On Matching M.D.F.E.G. Board Base Including Connection With Existing Outlet The Base Of Ceiling Fitting Shall Be Fabricated Fromm 22 Gauge Crca Sheet Complete In All Respect , Supply & Carring Of 600 Mm X 600 Mm X3.0 Mm Copper Plate, Vertically For Earth- Ing With Its Top At Least 3 M Below Groundlevel Complete 20 Mm Dia. G.I. Pipe Andfunnel For Watering And Two Earthing Lead Ofno. 8 To 10 Swg G.I. Wire In 15 Mm Dia. G.I.Pipe Upto Switch Board ( From Apron Toswitch Board The Cost Of G.I. Pipe & Gi Wirewill Be Extra ) 300 Mm Square C.I. Box Withhinged Cover, Masonal Housing Alternatelayer Of Charcoal / Coke And Salt Atleast 150 Mm Thick Alround Etc. As Per The Directionof Engineer In-Charge Complete In All Respect. , Supply & Fixing Of6 To 32 Amp Spmcb 10 Kac Curvecat A , Supply & Erection Of Factory Fabricated And Wire Metal Clad Floor Mounting Electrical Control Panel With Tpn Mccbs ( Four Pole 36 Ka With Thermal Magantic Release ) Swithes Complete Outgoing -200 Amp 5 Nosmccb , Supply And Erection Of Ac 230 / 250 Volts 50 Hzceiling Fan With Regulater Standard Down Rod Bladesincluding Connection Etc. Complete As Required ( Crompton Greaves / Gec / Orient Or Equivalevt Mark ) ( A ) -1400 Mm Sweep ( B ) -1200 Mm Sweep , Supply And Erection Of Ac 230 / 250 Volts 50 Hzexhaust Fan Including Providing Nuts Boltsamounting Frame & Other Accessories Includingconnection Etc. Complete As Required ( Crompton Greaves / Gec / Orient Or Equivalevt Mark ) ( A ) -300 Mm Sweep Airs Fresh Fans ( Light Duty ) ( B ) -450 Mm Sweep , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 25Mmdia , S&F And Making Connecion Of 40 Amp 4 Pole 30 Ma Elcb / Rccb Of Din Rail Mounting Complete In All Respect As Per The Direction Of The Engineer In Charge , Supply And Fixing Of Single Light Wall Bracket On Matching M.D.F.E.G. Board Base Etc Complete In All Respect , Supply & Fixing Of Ceiling Fitting On Matching Mdfeg Board Base Including Connection With Exiting Outlet The Base Of Ceiling Shall Be Febricated From 22 Gauge Crcasheet In Square Shape Finished With Black Matt Surface Complete With 3 Mm Thick Ex , Constructionof Recess Distributionboard ( Swich Board ) Of 600Mm X 480Mm X 200Mm Sizesincluding Cutting Of Brick Work Providinglintel Ofsuitable Size& Thicknessplastering Etc.With Supply Of All Materials , Labours, T&P, Etc. Req.For Proper Completion Of Work. , Supply & Fixing Of Factory Wired Hpf Surface Type Fluorescent Tubelight Fitting With Mirror Optics Suitable For 2X40 Watts Fluorescent Tubes Including Tubes Etc On Surface Complete In All Respect Cat A , Supply & Fixing Of Aluminium Conductor Pvc Insulated Armoured Cable Of 1100 Volt Grade At Depth Of 750 Mm Below Ground Level 16 Sqmm 4 Core , Supply & Instalation Of Window Air Conditioner 2 Ton Capacity With Stablizer & Required Accessories And Specified Company Or As Per Direction Of Eng-In-Charge.
