Tender For 16) Construction Of Anganwadi Building At Undarapatti H/O Kongur Panchayat
Tender Value
16.50 Lakhs
Estimated cost
Bid Submission
12 Mar 2024
0 days left
EMD
16500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
16 ) Construction Of Anganwadi Building At Undarapatti H / O Kongur Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | 1 . Construction of Anganwadi Building at Undarapatti H/o Kongur Panchayat |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B |
| 3 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 4 | Refilling with Excavated Earth in all etc |
| 5 | Collection and supply of gravel filling in to the basement including cost and conveyanceto the siteand all labour charges for filling |
| 6 | Filling in basement with sand in layers not more than 15cm thick and well rammed, watered and consolidated including all labour charges as per standard specification. |
| 7 | Brick work in C.M 1:5 mix using country bricks ground moulded of size 23x11x7 cu.cmincluding cost & conveyance of all materials to site and all labour charges etc., complete. |
| 8 | Basement :- |
| 9 | Super Structure :- |
| 10 | Supplying and erecting centering for sides & soffits including supports and strutting up to 3.29m height for plane surfaces in all floors with all cross bracing using mild steel sheets of size 90cm x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood poists of size 10cm x 6.5cm dia spaced at about 90cm center to center etc., complete complying with std. Specifications and as directed. For RCC floor slab, roof slab, rectangular, square Tee or Ell beams, lintel, staircase waise slab, landing slab, landing beam,portico beam, etc., |
| 11 | Below Ground Level :- |
| 12 | For Coloumn Post :- |
| 13 | Rate for Sunshade :- |
| 14 | Rate For Roof Slab , Lintel beam :- |
| 15 | Supplying ,fabricating and placing in position of mild steel or ribbed for steel rods and all RCC works as per the design given including cost of steel and binding wire in all floors etc., & conveyance of steel as per std. Specification etc.,complete complying with std. Specifications and as directed. |
| 16 | RCC 1:1 1/2:3 mix using 20 mm ISS HBG metal for RCC items of works excluding cost of reinforcement and fabricating charges and centering and shuttering charges but including curing providing fixtures like fan clamps in the RCC floor or roof level wherever neccessary and bearing surfaces of walls, sides and bottom of slab,beams etc., complete |
| 17 | Plastering with cement mortar 1:3 mix to 10mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete. |
| 18 | Plastering with cement mortar 1:5 mix to 12mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete. |
| 19 | Paving the FLOORING with scratch proof Printed VERTIFIED TILES of approved quality and colour of size 600*600*8 mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 4.00 kg/m2 etc., complete complying with standard specification. |
| 20 | Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum |
| 21 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete |
| 22 | Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm |
| 23 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 24 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stoneM.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 25 | Exterior Emulsion painting two coats with best approved quality and colourpaint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 26 | Distembering two coats with best approved distemberincluding cost and conveyance of all materials to site and all labour charges etc complete |
| 27 | Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 28 | Labour Charges for Fixing of doors along with frames in position |
| 29 | Supplying and fixing in Position European type water Closet of best quality and approved make with 100mm \" p\" or \"s\" trap with double flapped rigit P.V.C Seat level flusing etc |
| 30 | Labour Charges for Fixing of Windows along with frames in position |
| 31 | Supplying and fixing in Position Ordinary colour glazed indian type water closet quality and approved make with 100mm \" p\" or \"s\" trap with double flapped rigit P.V.C Seat level flusing etc |
| 32 | Supply and Fixing of RCC jolly in Position |
| 33 | Supply and Fixing of RCCPrecast slab for septic tank manhole in position |
| 34 | Supplying and fixing P.V.C rain water dowm fall pipe110mm dia with necesaary shoes , bends & clamps etc |
| 35 | Supply and Fixing of Cuddapah slab of 20mm thick for Shelf arrangements including cost and conveyace of all materials to site and all labour charges etc complete |
| 36 | Supply and Fixing of Cuddapah Sink and all labour charges etc complete |
| 37 | Plastering with cement mortar 1:3 mix to 20mm thick including curing, cost and conveyance of all materials & all labour charges etc., complete. |
| 38 | Fabricating supply and fixing and position MS Door , Windows et |
| 39 | Door size 1.10m x 2.10m |
| 40 | Door size 0.75m x 2.10m |
| 41 | Door size 1.00m x 2.10m |
| 42 | Window size 1.20m x 1.30m |
| 43 | Ventilator size 0.90 x 0.45 |
| 44 | ELECTRIFICATION |
| 45 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) SD 25 |
| 46 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD 38 |
| 47 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mainsSD 65 |
| 48 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70 |
| 49 | Supply and fixing of single box type 4\"36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87 |
| 50 | Supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps SD 112 |
| 51 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD 125 |
| 52 | Supply and fixing of 15A aerial fuse unit (500A) on suitable 100 x 100mm TW concealed box with hylem sheet on the tapping pole with necessary clampsSD 128 |
| 53 | Supply and delivery of PVC Water Tank |
| 54 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Mar 06, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 12, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 12, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender