Delhi Jal Board-DJB has published Repairing/Strengthening Of Conveyor Belt With Other Allied Works At Inlet Of 45 Mgd Okhla Stp.. Submission Date for this Tender is 12-03-2024. Conveyors and Accessories Tenders in okhla Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling/ Cutting of worn out/ corroded M.S. sheet of conveyer belt, angle Iron along with bottom sheet with the help of gas cutter, all tools & tackles with safety equipment as per requirement at site. |
| 2 | Fabrication of outer structure along with base with the M.S. Angle Iron of sizes 100 x 100 x 8 mm approx. 40 meter & M.S. Sheet 8 mm thick plate as per existing size approx. 5.5 meter length and 01 meter width for base plate. Fabrication & making side structure with M.S Sheet of 8 MM. approx. 40 meter and 2 nos. front & back side. Making half round on both side along with fixing of hinges as required for fixing the rollers by M.S angle 65x65x6 mm approx. 20 meter. |
| 3 | Fabrication the chamber box for lifting the floating material from conveyer belt to floating chamber with the help of M.S Angle 50x50x5 mm and M.S Sheet 5 mm thick. |
| 4 | Fabrication the comb for cleaning the bar screen with the help of M.S pipe 25 mm thick approx. 10 meter and M.S Angle 40x40x5mm approx. 0.5 meter and M.S Bar 20 sq mm approx. 1.5 meter. |
| 5 | Dismantling and repairing of both side rollers of size approx. 0.5 meter with replacement of bearing, shaft as per existing size and greasing, overhauling and assembling and fixing at side with required material for smoothly running. |
| 6 | Providing of roller as per existing size /approx. 12’’ for shifting the floating material from conveyer Belt to chamber. |
| 7 | Providing of conveyer belt 0.5 meter wide and 16 meter long for shifting the floating material hard black rubber material is a blend of neoprene, nitrile, and styrene butadiene rubber (SBR) and comes inserted with a cloth fabric. |
| 8 | Dismantling of 0.5 HP 415 volts 3 phase 960 RPM Crompton Greaves make induction Motor. The work includes separating stator & rotor, varnishing, baking with Dr. Back Varnish, replacement of connection Leads, connection plate & Box. Assembling the complete motor and Put on the foundation, tightening on the Nut Bolts, i/c providing/fixing of new tyre coupling. |
| 9 | Dismantling and overhauling of gear box with required of worm Gear, Pinion, Bushes, Bearings Fabricated as per standard in respect of size, finishing as per sample of primary gear box |
| 10 | Assembling & fitting of the complete unit/ components/ structure with necessary Civil Works at site. Alignment/ Testing/ Commissioning of the mechanical Bar Screen after making connections of Electric Motor and general servicing of starter. |
| 11 | Painting of the complete system from both side with one coat of Red oxide and two coat of enamel black paint. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
