Department of Local Administration has published Tender For Construction Of Shelter For Urban Homeless People At Sanarapet In Oulgaret Municipality, Puducherryy.. Submission Date for this Tender is 15-03-2024. PEB Tenders in Pondicherry Puducherry. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Code No.2.6.1 Earth work in excavation by mechanicalmeans (Hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5min width as well as 10sqm on plan)including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil. |
| 2 | Code No.2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil. |
| 3 | Code No.2.25 Filling available excavated earth(excluding rock) in trenches, plinth, sidesof foundations etc. in layers not exceeding20cm in depth, consolidating each depositedlayer by ramming and watering, lead upto50m and lift upto 1.5m |
| 4 | CODE NO. 2.26.1 Extra for every additional lift of 1.5m orpart there of in excavation / bankingexcavated or stacked materials - all kindsof soil. |
| 5 | CODE NO. 2.27 Supplying and filling in plinth with river sand under floors, including watering ,ramming consolidating and dressing complete |
| 6 | CODE NO. 4.1.10 Providing and laying in position cementconcrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) |
| 7 | CODE NO. 5.1.2 Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | CODE NO. 5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 9 | CODE NO. 5.3.1(PSR 2013-14)-{SE Approved Rate based on PSR(2020-21) Basic rate} Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves , chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluding the cost of centering ,shuttering, finishing and reinforcement , with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 10 | CODE NO. 5.8 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers , facias and eaves boards upto floor five level excluding the cost of centering , shuttering , finishing and reinforcement , with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | CODE NO: 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete |
| 12 | Code No.5.9.3 Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform |
| 13 | Code No.5.9.5 Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and cantilevers |
| 14 | Code No.5.9.6 Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts |
| 15 | Code No.5.9.7 Centering and shuttering includingstrutting , propping etc and removal ofform for - Stairs , (excluding landings) except spiral -staircases. |
| 16 | CODE NO.5.9.13 Centering and shuttering including strutting , propping etc and removal of form for - Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards |
| 17 | CODE NO.5.9.16.1 Centering and shuttering including strutting , propping etc and removal of form for - Edges of slabs and breaks infloors and walls - under 20 cm wide |
| 18 | CODE NO.5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 19 | CODE NO.5.22A.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto and above plinth level - Thermo - Mechanically Treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more |
| 20 | CODE NO.6.1.1 (Addendum) Brick work with common burnt clay F.P.S.(non modular ) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 21 | CODE NO.6.1.2 (Addendum) Brick work with common burnt clay F.P.S.(non modular ) bricks of class designation7.5 in foundation and plinth in - cementmortar 1:6 (1 cement : 6 coarse sand) |
| 22 | CODE NO.6.4.1(Addendum) Brick work with common burnt clay F.P.S (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 23 | CODE NO.6.4.2(Addendum) Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 24 | CODE NO.6.13.2(Addendum) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 25 | CODE NO. 6.15 Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry |
| 26 | CODE NO. 8.2.2.1 Providing and fixing 18mm thick gang sawcut, mirror polished (premoulded andprepolished) machine cut for kitchenplatforms,vanity counters,windowsills,facias and similar locations , ofrequired size, approved shade,colour andtexture laid over 20mm thick base cementmortar 1:4 (1 cement : 4 coarse sand),joints treated with white cement, mixedwith matching pigment, epoxy touch ups,including rubbing,curing, moulding andpolishing to edges to give high glossfinish etc. complete at all levels -Granite of any colour and shade - Area ofslab upto 0.50 sqm. |
| 27 | CODE NO. 8.13.1 Providing and laying Polished Granite stoneflooring in required design and patterns ,in linear as well as curvilinear portionsof the building all complete as per thearchitectural drawings with 18mm thickstone slab over 20mm (average) thick baseof cement mortar 1:4 (1 cement : 4 coarsesand) laid and jointed with cement slurryand pointing with white cement slurryadmixed with pigment of matching shadeincluding rubbing , curing and polishingetc, all complete as specified - PolishedGranite stone slab jet Black , Cherry Red ,Elite Brown , Cat Eye or equivalent. |
| 28 | CODE NO.9.1.2P Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Padak wood. |
| 29 | CODE NO. 9.21.1 Providing and fixing ISI marked flush doorshutters conforming to IS : 2202 (Part 1)non - decorative type, core of block boardconstruction with frame of 1 st class hardwood and well matched commercial 3 plyveneering with vertical grains or crossbands and face veneers on both faces of shutters - 35 mm thick including ISI markedStainless Steel butt hinges with necessaryscrews. |
| 30 | CODE NO 9.53 Providing 40 X 5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs andembeddings in cement concrete block 30 x10x 15 cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominalsize) |
| 31 | CODE NO 9.62.1R Providing and fixing ISI marked powdercoating sliding door bolts with nuts and screws etc.complte - 300 X 16 mm |
| 32 | CODE NO 9.76 Providing and fixing bright finished brass100 mm mortice latch and lock with 6 leversand a pair of lever handles of approvedquality with necessary screws etc complete |
| 33 | CODE NO 9.95.2 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 X 63 X 4 mm |
| 34 | CODE NO 9.95.4 Providing and fixing ISI marked aluminiumbutt hinges anodised (anodic coating notless than grade AC 10 as per IS : 1868)transparent or dyed to required colour orshade with necessary screws etc.complete -100 X 63 X 4 mm |
| 35 | CODE NO 9.97.1 Providing and fixing aluminium tower boltsISI marked, anodised (anodic coating notless than grade AC 10 as per IS :1868) ,transparent or dyed to required colour orshade , with necessary screws etc. complete - 300 x10 mm |
| 36 | CODE NO 9.100.1 Providing and fixing aluminium handles ,ISI marked , anodised (anodic coating notless than grade AC 10 as per IS : 1868)transparent or dyed to required colour orshade,with necessary screws etc, complete -125 mm |
| 37 | CODE NO 9.100.2 Providing and fixing aluminium handles ,ISI marked , anodised (anodic coating notless than grade AC 10 as per IS : 1868)transparent or dyed to required colour orshade,with necessary screws etc, complete -100 mm |
| 38 | CODE NO 9.123 Providing and fixing facory made door frame(single rebate ) made out of single pieceextruded solid PVC foam profile withhomogenous fine cellular structure havingsmooth outer integral skin having 62 mmwidth & 32 mm thickness , frame will bemitred & jointed with self driven selftapping screws of size 38 mm x 4 mm & PVCsolvent cement , including fixing the frame to wall with suitable dia & length anchorfastener as per manufacturer"sspecification |
| 39 | CODE NO 9.124.1 Providing and fixing factory made 30 mmthick door shutter made of solid PVC foamprofile . The styles & rails shall be ofsize 75 mm X 30 mm having wall thickness 5mm . The styles , top & bottom rails shallhave one side wall thickness of 15 mmintegarally extruded on the hinge side ofthe profile for better screw holding power.The styles and rails shall be reinforcedwith M.S. tubes of size 33 mm x 17 mm x 1 mm , painted with primer , all four cornersof reinforcement to be welded or sealed .Solid PVC extruded bidding (push fit type)will be set inside the styles and the railswith a cavity, to receive single piece extruted 5 mm PVC sheet as panel. Thestyles and rails will be mitred cut andjoint with the help of PVC solvent cement &self driven self tapping screws. Singlepiece extruded solid PVC lock rail of size100 mm X 30 mm with wall thickness 5 mm &15 mm integrally extruded in the middle ofthe lock rail & fixed with styles with the help of PVC solvent cement and self drivenself tapping screws of size 100 mm x 8 mmcomplete as per manufacturer"sspecifications – including all necessary fittings Non decorative finish |
| 40 | CODE NO.10.17 Providing and fixing M.S. fan clamp type Ior II of 16mm dia M.S. bar, bent to shapewith hooked ends in R.C.C.slabs or beamsduring laying , including painting theexposed portion of loop, all as perstandard design complete |
| 41 | CODE NO.10.25.2-Steel work welded in built up sections /framed work , including cutting,hoisting,fixing in position and applying a primingcoat of approved steel primer usingstructural steel etc. as required - ingratings, frames, guard bar, ladder,railings, brackets,gates and similar works |
| 42 | CODE NO.11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate |
| 43 | CODE NO.11.36B Providing and fixing 1st quality ceramicglazed wall tiles conforming to IS : 15622 (thickness to be specified by themanufacturer) , of approved make (Johnson /Asian / Somany / Nitco) in all colours ,hades of size 300 x 450 mm as approvedin skirting , risers of steps and dados,over 12mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand ) and jointing withgrey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 300x450 mm |
| 44 | CODE NO. 11.37.1 Providing and laying ceramic glazed floortiles of size 300x300 mm (thickness to bespecified by the manufacturer), of 1stquality conforming to IS : 15622, ofapproved make (Nitco / Kajaria) incolours such as white, Ivory, Grey, Fumered brown ,laid on 20mm thick cementmortar 1:4 (1 cement : 4 coarse sand),including pointing the joints with whitecement and matching pigment etc., complete |
| 45 | CODE NO. 11.41.2A Providing and laying fully vitrified floortiles of size 600 x600 mm (thickness to bespecified by the manufacturer) with waterabsorption less than 0.08% and conformingto IS : 15622 of approved make (Nitco / Rak/ Johnson /Asian ) in all colours andshades , laid on 20 mm thick cement mortar1:4 (1 cement : 4 coarse sand) , includinggrouting the joints with white cement andmatching pigments etc., complete - size oftile 600 x600 mm |
| 46 | CODE NO.12.15.1 Painting top of roofs with bitumen ofapproved quality @ 17kg per 10 sq.mimpregnated with a coat of coarse sand at60cudm per 10 sq.m including cleaning theslab surface with brushes and finally witha piece of cloth lightly soaked in kerosene oil complete - with residual typepetroleum bitumen of grade VG-10 |
| 47 | CODE NO.12.20 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete |
| 48 | CODE NO.12.20L Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with Parapet wall complete |
| 49 | CODE NO.12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter |
| 50 | CODE NO.12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend |
| 51 | CODE NO.12.42.6.1 Providing and fixing on wall faceunplasticised - PVC moulded fittings /accessories for unplasticised rigid PVCrain water pipes conforming to IS:13592Type A, including jointing with seal ringconforming to IS: 5382, leaving 10mm gapfor thermal expansion - shoe (plain) - 75mm shoe |
| 52 | CODE NO.12.43.2 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm |
| 53 | CODE NO.13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) |
| 54 | CODE NO.13.9.2 cement plaster 1:3 (1 cement : 3 coarsesand) finished with a floating coat of neatcement - 20mm cement plaster |
| 55 | CODE NO.13.9.2A 15 mm cement plaster on the rough side ofsingle or half brick wall of mix 1:5 (1 cement : 5 fine sand) |
| 56 | CODE NO.13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3fine sand) |
| 57 | CODE NO.13.21 Extra for providing and mixing water proofing material in cement plaster work inproportion recommended by the manufacturer |
| 58 | CODE NO.13.24.1 Extra for plastering done on mouldingcornices or architraves including neatfinish to line and level - in one coat |
| 59 | CODE NO. 13.37.1 White washing with lime to give an evenshade - new work (three or more coats) |
| 60 | CODE NO. 13.43.1 Applying one coat of water thinnable cementprimer of approved brand and manufactureron wall surface - water thinnable cementprimer |
| 61 | CODE NO.13.47.1 Finishing walls with premium acrylic smoothexterior paint with silicone additives ofrequired shade - New work (two or morecoats applied @1.43 ltr / 10 sqm over andincluding priming coat of exterior primerapplied @ 2.20 kg / 10sqm) |
| 62 | CODE NO.13.50.1 Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 63 | CODE NO.13.50.3 Applying priming coat - with ready mixedred oxide zinc chromate primer of approvedbrand and manufacture on steel galvanisediron / steel works |
| 64 | CODE NO 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work |
| 65 | CODE NO 13.80 Providing and applying white cement basedputty of average thickness 1mm of approvedbrand and manufacturer, over the plasteredwall surface to prepare the surface evenand smooth complete |
| 66 | CODE NO 16.1 Making plinth protection 50mm thick ofcement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20mmnominal size) over 75mm bed of dry brickballast 40mm nominal size well rammed andconsolidated and grouted with fine sand including finishing the top smooth |
| 67 | CODE NO. 16.96 Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete |
| 68 | CODE NO.17.3.2 Providing and fixing white vitreous chinapedestal type water closet (European type)with seat and lid,10 litre low level whitevitreous china flushing cistern & C.P.flushbend with fittings & C.I. brackets , 40 mmflush bend , overflow arrangement withspecials of standard make and mosquitoproof coupling of approved municipal designcomplete, including painting of fittingsand brackets , cutting and making good thewalls and floors wherever required - W.C.pan with ISI marked black solidplastic seat and lid |
| 69 | CODE NO.17.4.1 Providing and fixing white vitreous chinaflat back or wall corner type lipped fronturinal basin of 430x 260x350 mm and340x410x265mm sizes respectively withautomatic flusing cistern with standardflush pipe and C.P. brass spreaders withbrass unions and G.I.clamps complete,including painting of fittings and brackets, cutting and making good thewalls and floors wherever required - Oneurinal basin with 5 litre white P.V.C.automatic flusing cistern |
| 70 | CODE NO.17.7.4 Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps ,32mm C.P.brass waste of standard pattern ,including painting of fittings and brackets, cutting and making good the walls wherever required - white vitreous china flat backwash basin size 550x400 mm with single 15mmC.P. brass pillar tap |
| 71 | CODE NO. 17.25.1 Providing and fixing white vitreous chinawash basin including making all connectionsbut excluding the cost of fittings - flatback wash basin of size 630x450mm |
| 72 | CODE No.17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C.pan of size 580x440mm |
| 73 | CODE NO.17.14.1 Extra for using coloured W.C.pan instead ofwhite W.C.pan - Orissa pattern W.C.pan 580x440mm |
| 74 | CODE NO.17.16 Extra for using coloured pedestal type WCpan (European type) with low level cisternof same colour instead of white vitreouschina WC pan and cistern |
| 75 | CODE NO.17.28.1.2 Providing and fixing P.V.C. waste pipe forsink or wash basin including PVC wastefittings complete - semi rigid pipe - 40mmdia |
| 76 | CODE NO.17.32.4 - Providing and fixing mirror of superiorglass (of approved quality) and of requiredshape and size with plastic moulded frameof approved make and shade with 6mm thickhard board backing - rectangular shape1500x 450 mm |
| 77 | Code No.17.37.2 - roviding and fixing M.S.holder - batclamps of approved design to sand cast iron/ cast iron (spun) pipe embedded in andincluding cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size), including cost of cutting holes andmaking good the walls etc. - for 75mm diapipe |
| 78 | CODE NO.17.73.2 Providing and fixing PTMT towel railcomplete with brackets fixed to woodencleats with CP brass screws with concealedfitting arrangement of approved quality andcolour - 600 mm long towel rail with total length of645 mm, 78 mm wide and effectiveheight of 88mm, weighing not less than 190gms |
| 79 | CODE NO.17.78.1 Providing and fixing CP brass health faucetof approved quality - 15 mm nominal bore |
| 80 | CODE NO.18.9.11 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement andtesting of joints complete (Internal work exposed on wall)- 20 mm nominal outer dia pipes |
| 81 | CODE NO.18.9.12 Providing and fixing ASTM pipes includingall ASTM plain& brass threaded fittings i/cfixing the pipe with clamps at 1.00mspacing . This includes jointing of pipes &fitting with one step ASTM solvent cementand testing of joints complete (Internalwork exposed on wall ) - 25mm nominal outerdia pipes |
| 82 | CODE NO.18.9.14 Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/cfixing the pipe with clamps at 1.00mspacing . This includes jointing of pipes &fitting with one step ASTM solvent cementand testing of joints complete (Internal work exposed on wall ) - 40mm nominal outerdia pipes |
| 83 | CODE NO.18.17.1 Providing and fixing gun metal gate valvewith C.I.wheel of approved quality (Screwedend) - 25mm nominal bore |
| 84 | CODE NO.18.17.3 Providing and fixing gun metal gate valvewith C.I.wheel of approved quality (Screwedend) - 40mm nominal bore |
| 85 | CODE NO.18.18.3 Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic floats complete - 25mm nominal bore |
| 86 | CODE NO.18.19.3.1 Providing and fixing gun metal non -returnvalve of approved quality (screwed end) -40 mm nominal bore - Horizontal |
| 87 | CODE NO.18.21.2.1 Providing and fixing unplasticised PVCconnection pipe with brass unions - 45 cm length - 15mm nominal bore |
| 88 | CODE NO.18.32.1 Constructing masonry chamber 30x30x50 cminside , in brick work in cement mortar 1.4(1 cement : 4 coarse sand) for stop cock,with C.I.surface box 100x100x75 mm(inside) with hinged cover fixed in cementconcrete slab 1:2:4 mix (1 cement : 2coarsesand : 4 graded stone aggregate 20mmnominal size) , i/c necessary excavation ,foundation concrete 1:5:10 (1 cement :5fine sand : 10 graded stone aggregate 40mmnominal size) and inside plastering withcement mortar 1:3 (1 cement : 3 coarsesand) 12mm thick , finished with a floatingcoat of neat cement complete as perstandard design - with common burnt clayF.P.S (non modular) bricks of classdesignation 7.5 |
| 89 | CODE NO.18.33.1 Constructing masonry chamber 60x60x75 cminside , in brick work in cement mortar 1.4(1 cement : 4 coarse sand) for sluicevalve, with C.I.surface box 100 mm topdiametre, 160mm bottom diametre and 180mmdeep (inside) with chained lid and RCC topslab 1:2:4 mix (1cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size), i/c necessary excavation , foundationconcrete 1:5:10 (1 cement : 5 fine sand :10 graded stone aggregate 40mm nominalsize) and in side plastering with cementmortar 1:3 (1 cement : 3 coarse sand) 12mmthick , finished with a floating coat ofneat cement complete as per standard design - with common burnt clay F.P.S (Non modular ) bricks of class designation 7.5 |
| 90 | CODE NO.18.49.1 Providing and fixing C.P.brass bib cock ofapproved quality conforming to IS: 8931 -15 mm nominal bore |
| 91 | CODE NO.18.50.1 Providing and fixing C.P. brass long nosebib cock of approved quality conforming toIS standards and weighing not less than 810gms - 15mm nominal bore |
| 92 | CODE NO.18.53.1 Providing and fixing C.P.brass angle valvefor basin mixer and geyser points ofapproved quality conforming to IS: 8931- 15mm nominal bore |
| 93 | CODE NO.19.4.3.1 Providing and fixing square - mouthS.W.gully trap class SP -1 complete withC.I. grating brick masonry chamber with water tight C.I.cover with frame of 300x300 mm size (inside) the weight of coverto be not less than 4.50kg and frame to benot less than 2.70 kg as per standarddesign - 180x150mm size P type - withcommon burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 94 | CODE NO.19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarsesand) with R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size ), foundationconcrete 1:4:8 mix ( 1 cement : 4 coarsesand : 8 graded stone aggregate 40 mmnominal size), inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat ofneat cement and making channels in cementconcrete 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)finished with a floating coat of neatcement complete as per standard design -inside size 90x80 cm and 45 cm deepincluding C.I.cover with frame (light duty) 455 X 610 mm internal dimensions , totalweight of cover and frame to be not lessthan 38 kg (weight of cover 23 kg andweight of frame 15 kg) - with common burntclay F.P.S. (non modular ) bricks of classdesignation 7.5 |
| 95 | CODE NO.19.33.1 Providing and fixing on wall /column face unplasticed - PVC soil and waste pipes (type-B) conforming to IS:13592-1992including jointing with seal ring conformation to IS: 5382 leaving 10mm gap for thermal expansion - single socketed pipes 110mm diameter |
| 96 | CODE NO.19.33.1A Providing and fixing on wall face/column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm |
| 97 | CODE NO.19.33.1D Providing and fixing on wall face / columnface unplasticised - PVC mould fittings /accessories for unplasticisd - PVC soil andwaste pipes conforming to IS : 14735 - 1999including jointing with seal ringconforming to IS : 5382 leaving 10mm gapfor thermal expansion - bend with door 110mm |
| 98 | CODE NO.19.33.2 Providing and fixing on wall / column faceunplasticised - PVC soil and waste pipes(type B) conforming to IS :13592 - 1992including jointing with seal ringconforming to IS : 5382 leaving 10mm gapfor thermal expansion - Single socketedpipes 75mm diameter |
| 99 | CODE NO.19.33.2A Providing and fixing on wall / column faceunplasticisd - PVC moulded fittings /accessories for unplasticisd - PVC soil andwaste pipes conforming to IS :14735 -1999including jointing with seal ringconforming to IS : 5382 leaving 10mm gapfor thermal expansion - Single tee withdoor - 75x75x75mm |
| 100 | CODE NO.19.33.2C Providing and fixing on wall / column faceunplasticised - PVC moulded fittings /accessories for unplasticised - PVC soil andwaste pipes conforming to IS :14735 -1999including jointing with seal ring conforming to IS : 5382 leaving 10mm gapfor thermal expansion - Bend 75 mm |
| 101 | CODE NO.21.1.2.2 Providing and fixing aluminium work fordoors, windows, ventilators and partitionswith extruded built up standard tubularsections / appropriate Z sections and othersections of approved make conforming toIS:733 and IS: 1285, fixing with dashfasteners of required dia and size,including necessary filling up the gaps at junctions , i.e at top, bottom and sideswith required EPDM rubber / neoprene gasketetc. Aluminium sections shall be smooth,rust free, straight, mitred and jointedmechanically wherever required includingcleat angle, aluminium snap beading forglazing / paneling , C.P.brass / stainlesssteel screws , all complete as perarchitectural drawings (Glazing, panelingand dash fasteners to be paid forseparately) - for shutters of doors,windows & ventilators including providingand fixing hinges / pivots and makingprovision for fixing of fittings whereverrequired including the cost of EPDM rubber/ neoprene gasket required (fittings shallbe paid for separately) - Powder coatedaluminium (minimum thickness of powdercoating 50 micron) |
| 102 | CODE NO.21.3.1 Providing and fixing glazing in aluminiumdoor, window , ventilator shutters andpartitions etc. with EPDM rubber / neoprenegasket etc. complete as per thearchitectural drawings ( cost of aluminiumsnap beading shall be paid in basic item) -with float glass panes of 4.0 mm thickness |
| 103 | CODE NO.31.6B Providing and fixing water meter make(DASMESH) and stop cock in 25mm G.I pipeline including cutting and threading thepipe, making long screws, bolts, nuts,rubber insertions and testing the water meter etc. complete. |
| 104 | CODE NO. 31.252.1B Supplying and fixing of 100/125 Amps capacity cubical wall mounting panel board ofsize1300mm x 750mm x 225mm made of 16 gauge CR M.S. sheet painted with two coats of enamel paint, over zinc chromate primer, suitable arrangements for fixing switch disconnector, fuse switches, Voltmeter, Voltmeter Selector switch, Ammeter, Ammeter Selector switch, 3 Nos. of Indicator, 3 Nos. of Toggle switch, 3 Nos. of side lock fuses, 3 Nos. of C.T. Coil etc. The panel board shall include power mat, copper busbar, 3mm thick hylan sheet including internal wiring with provision for interlocking arrangements, copper flat for earthing arrangement linked with shutters and doors. The board shall be mounted on an angle frame of 30mm x 30mm x 6mm with legs.Supplying and fixing of 2 Nos. of TPN (CG/L&T/ Siemens/Standard make) 100/125 Amps, 415 V disconnector switch/cubical switch/fuse switch with fuse links complete.(1 No. for E.D. supply and 1 No. for Diesel Generatorsupply). Supplying and fixing of 2 Nos of 100 Amps, 415 V disconnector fuse switch/TPN Cubical switch (CG/L&T/ Siemens/standard make) with fuse links capacitor motor control complete. (1 number of power capacitor and 1 number of motor control), complete - 15HP to 30HP. |
| 105 | CODE NO. 31.265.1 Providing and fixing 50 mm dia GI pipe (Class B) conforming to IS 1239 (Part 1:1990) with GI fittings includingtrenching, refilling etc., complete for UG cable duct. |
| 106 | CODE NO. :31.275.1D Laying of under ground cable direct in ground including metal road cutting,excavation of earth, sand cushion, brick protection, back filling etc., complete. - upto 50 sqmm |
| 107 | CODE NO. :31.259.1B Supplying of 3.5/4x50 sqmm under ground cable (Paragon/suncab/Empire) complete.-suitable for (30HP to 40HP pumpset)/(upto 40KVA Genset). |
| 108 | El. PSR CODE NO.1.17.1 Supplying and drawing following sizes of FRLS PVCinsulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -1 X 1.5 |
| 109 | El. PSR CODE NO.1.17.2 Supplying and drawing following sizes of FRLS PVCinsulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -- 2 X 1.5 |
| 110 | El. PSRCODE NO.1.17.11 Supplying and drawing following sizes of FRLS PVCinsulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -2 x 2.5 sq.mm |
| 111 | El. PSR CODE NO. 1.17.20 Supplying and drawing following sizes of FRLS PVCInsulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -2 x 4 sq.mm |
| 112 | El. PSRCODE NO. 1.17.29 Supplying and drawing following sizes of FRLS PVCInsulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -2 x 63 sq.mm |
| 113 | El. PSRCODE NO.1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 20mm |
| 114 | El. PSR CODE NO. 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm |
| 115 | El. PSR CODE No.1.24.1 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required - 5/6 A switch |
| 116 | El. PSR CODE No.1.24.3 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required - - 15/16 A switch |
| 117 | El. PSR CODE No.1.24.4 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required - - 3 pin 5/6 A socket outlet. |
| 118 | El. PSR CODE NO.1.27.2 Supplying and fixing following size / modules , GI box per alongwith modular base & cover plate for modular switches in recess etc. as required - 3 module (100mm x 75mm) |
| 119 | El. PSR CODE NO.1.27.3 Supplying and fixing following size / modules , GI box per alongwith modular base & cover plate for modular switches in recess etc. as required -4 module (125 mm x 75 mm) |
| 120 | El. PSR CODE NO.1.27.4 Supplying and fixing following size / modules , GI box per alongwith modular base & cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 mm) |
| 121 | El. PSR CODE NO.1.27.5 Supplying and fixing following size / modules , GI box per alongwith modular base & cover plate for modular switches in recess etc. as required - 8 module (125 mm x 125 mm) |
| 122 | El. PSR CODE NO.1.28.1 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required - 1 or 2 modul |
| 123 | El. PSR CODE NO.1.28.2 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required -- 3 module |
| 124 | El. PSR CODE NO.1.28.3 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required -- 4 module |
| 125 | El. PSRCODE NO.1.28.4 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required -- 6 module |
| 126 | El. PSR CODE NO.1.33 Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box / wooden block including connection etc as required |
| 127 | El. PSRCODE NO.1.34 Supplying and fixing brass batten / angle holder including connection etc.as required |
| 128 | El. PSRCODE NO.1.35 Installation , testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS / CFL /LED lamps per fitting . Complete with all accessories including connections etc as required |
| 129 | El. PSR CODE NO.1.45 Installation , testing and commissioning of ceiling fan , including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper conductor ,single core cable , including providing and fixing phenolic laminated sheet cover on the fan box etc as required |
| 130 | El. PSR CODE NO.1.47 Supplying and fixing extra down rod of 10 cm length G.I.pipe , 15 mm dia , heavy gauge including painting etc . As required. (Note: More than 5 cm length shall be rounded to thenearest 10 cm and 5 cm or less shall be ignored) |
| 131 | El. PSR CODE NO.1.51 Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc as required |
| 132 | El. PSR CODE NO.1.58 Supplying and fixing PVC batten / angle holder including connection etc.as required |
| 133 | El. PSR CODE NO.2.1.2 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel , making connections ,etc , as required - 63 A TP&N |
| 134 | El. PSRCODE NO 2.3.4 Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earthbar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 16 way , double door |
| 135 | El. PSRCODE NO.2.10.3 Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. - Double Pole |
| 136 | El. PSRCODE NO.2.12.2 Supplying and fixing following rating , double pole , 240 V, Isolator in the existing MCB DB complete with connections , testing and commissioning etc.as required - 63A |
| 137 | El. PSRCODE NO.5.1 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal / coke and salt) as required |
| 138 | El. PSRCODE NO.9.1.8 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 3 x 16 sq.mm (25 mm) |
| 139 | El. PSRSl.No.1101CODE No.3132-O Providing and fixing 600mm-1400rpm heavy dut exhaust fan (900rpm-AI) make - Almonard/usha |
| 140 | El. PSRSl.No.1096 Code No.3127-O Providing and fixing 1200 mm sweep double ball bearing ceiling fan - make almonard and usha |
| 141 | El. PSR Sl.No.1211 Providing and fixing 60W LED street light fitting (orbit) |
| 142 | El. PSR Sl.No.77, Code No.1240 Supplying 20mm PVC junction box, two way |
| 143 | Code No. NPSR -SE(OM), LAD Approved Rate vide No.42/LAD/SE(OM)/AE(P)/OM-24/2022-23, dt: 20.05.2022 Providing and fixing LED tube light fitting Make -Philips |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
