Drinking Water And Sanitation Department has published Repairing And Overhauling Of 11 Kv Electro-Mechanical Equipments At Wtp Jamdova Dhanbad Urban Water Supply Scheme ( Jnnurm ) Under D.W. & S. Mechanical Division, Dhanbad. Submission Date for this Tender is 14-03-2024. Electromechanical Machinery Tenders in dhanbad Jharkhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | 11 KV Incommer Pannel Cost for overhauling of 11KV incoming pannel, checking and changing of its damaged spares such as |
2 | Vaccum contactor of 630A (BVB) - 2 Set |
3 | Glass insulater |
4 | Port insulator |
5 | Current transformer [Ratio200/1A] moulded type |
6 | Earth Protection relay [ REJ601 Model] |
7 | Motor Protection relay [ Model REN-610] |
8 | Auxary Relay [Model CRM-110 DCA] |
9 | 2 Pole MCB |
10 | 11KV port insulator for 11KV make ABB |
11 | Cost for supplying and laying of 400 mm sq. x 3 core 11KV grade armoured Aluminium conductor PVC insulated and PVC sheathed (for connection of APFC panel) |
12 | Cost for S/F of 11KV Termination kit for 400 mm sq. x 3 core Aluminium cable with lugs insulating materials, heat srinkage type with materials and labour charges |
13 | 11 KV Soft Starter |
14 | Cost for supplying fitting testing and commissioning of soft starter (Jaishree make) HFSR soft starter rating 300KW, voltage-11KV, control supply voltage-110V, Auscibay supply voltage-230V, type HFSR-2012-NS-R and doing all line connection and testing on full load (Operating range 40-60Amp.) |
15 | Cost for supplying and fitting of CTMR relay type-9601, relay setting 30/60sec of 24V DC for soft starter |
16 | 300 KW Pump Set |
17 | Cost for repairing and overhauling of 300KW [Jyoti make] HSC C/F Pump set and changing of its bearing No.-22212-02 Nos, gland sleeve, check nut,pump shaft, bearing housing, nut bolt etc and doing complete assembly and testing on load. |
18 | Cost for all labour tools and technician for dismentlingof 300 KW HT motor operated on 11KV 3 phase, 50c/s, rpm 1480 induction motor as per following scope of work:- Dismentling of motor , Stripping winding from startor core & cleaning of startor slots Hot spot test of startor core ,Restagging of startor laminations , Restagging of startor laminations , Startor rewinding , VPL of startor winding , Rotor dynamic balancing at rated RPM ,Motor reassembly , Routing testing at rated voltage ,load testing of the motor at rated voltage |
19 | Cost for taking out both side bearing and S/F & changing of DE bearing NU 324M and NDE bearingNo 6324M-1no, filling of grease etc all complete with materials and labour charge for 300 KW H.T. Motor |
20 | Cost for complete dismantling checking and doing complete rewinding of 300KW/400 HP (11KV) motor with required materials including labour charges after deducting scrap materials including transportation charges up & down. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail