|
| 1 | Sub Head I:- EI, FANS & ACRoutine Maintenance all electrical installation internal and external, compound light, electrical panels and switch gears, pumps, provision of fans and fittings, lamps of all sizes etc repairing of panel board, street lights etc as reqd. |
| 2 | Wireman- 2 Nos. (6:00AM to 2:00 PM & 2:00 PM to 10:00 PM) |
| 3 | Khallasi - 2 Nos.(6:00AM to 2:00 PM & 2:00 PM to 10:00 PM) |
| 4 | Following material /electrical accessories shall be supply by agency suitable for existing different type switch box / fitting and existing man power shall be used for replacement on day-to-day maitenance works etc as required. (Labour already included in Item No. 1 o Sub Head - I : EI & FANS & AC ) |
| 5 | S.P. 5/6 amps, one way switch, piano type ISI marked |
| 6 | S.P. 15/16 amps, one way switch, piano type ISI marked |
| 7 | 3 pin 5/6 amps socket outlet, piano type ISI marked |
| 8 | 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked |
| 9 | Bell push, piano type |
| 10 | Telephone Socket outlet piano type |
| 11 | T.V. Socket outlet piano type |
| 12 | Ceiling rose, 3 pin, 5 amps ISI marked |
| 13 | Call bell/ buzzer, single phase |
| 14 | 3 mm thick phenolic laminated sheet i/c cutting ofsuitable size & fixing on existing switch board with fixing of all existing switch/socket/ Fan regulator. |
| 15 | 6 to 32 Amp SP MCB, \"C\" curve, 10 kA breaking capacity |
| 16 | 6 amps. to 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity |
| 17 | 6 amps. to 32 amps. ratings , TP MCB, “C” curve, 10 KA breaking capacity |
| 18 | 6 amps. to 32 amps. ratings , TPN MCB, “C” curve, 10 KA breaking capacity |
| 19 | 3 pole MCCB, 100A, 16KA |
| 20 | 3 pole MCCB, 200A, 25KA |
| 21 | 1.5 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable |
| 22 | 2.5 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable |
| 23 | 4.0 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable |
| 24 | 6.0 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable |
| 25 | 10 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable |
| 26 | 2.50 mfd capacitor |
| 27 | Medium Step Fan Regulator piano type |
| 28 | 1200 mm sweep Ceiling fans |
| 29 | 300 mm sweep heavy duty exhaust fans |
| 30 | 250 mm sweep PVC Air Ventilation fans |
| 31 | Geyser heating element for 15/25 ltr, 2 KW rating |
| 32 | Geyser Auto Cut-off Thermostatefor 15/25 ltr |
| 33 | Desert cooler submersible pump. |
| 34 | 15/16 A 3 Pin Plug Top |
| 35 | Supply of surface / recess mounted Round / Square LED Downlighter having minimum system lumens output 1200 & system efficacy = 100 lumens/watt and colour temperture of 4000-6600 kelvin, CRI =80%,having power factor=0.95, THD =10%. |
| 36 | Supply of IP 65 Surface mounted LED bulkhead type fittingfor having minimum system lumens 1000 & system efficacy =80 lumens/watt in 5000-6000 K CCT etc. as reqd. |
| 37 | 600 mm long nominal size LED batten mirror light fitting made out zwith Aluminium die cast housing and Poly carbonate diffuser with all accessories having rating not more than 10 W, System Ef?cacy not less than 100 lm/W, lumens output not less than 1000, CRI >80 complete etc. as required. |
| 38 | Supply of recess mounted 2\" x 2\" (Nominal size) LED panel, made out of CRCA powder coated enclosure with suitable glear free diffuser having system lumens output not less than3600, efficiency =100lumens/watt, power factor of =0.95, CRI of =80%, THD =10%, CCT 4000- 6600K(as required), suitable for 230 V, 50 Hz,1-¢ AC supply etc. as required. |
| 39 | Supply of energy efficient LED flood light fittings made of pressure die cast aluminium with LED source having following minimum lumens with system efficacy = 100 Lm/Watt & CCT = 4000K, CRI=70 surge protection device, IP 66 housing, electronic driver suitable for 1-¢, 230 V, 50 Hz, AC supply. |
| 40 | Having 8400 minimum lumens |
| 41 | Supplying of following Ltr capicity, vertical type ,5 star rating, storage type water geyser i/c thermostat, high temp. Cutt off complete with inlet & outlet pvc connection, 15 A 3-pin plug top etc as reqd. |
| 42 | 15 Ltr |
| 43 | 25 Ltr |
| 44 | Annual comprehensive maintenence and routine servicing of the water coolersi/c gas charging & replacement of capacitors, fan motor, thermostat, freezer coil , cards, compressor and any other accesories in the water cooler are required etc complete as reqd exclusion-replacement of water cooler body etc as required. (80/120 Ltrs Storage Capacity water Coolers - 5 Nos) |
| 45 | Supply, Installation, Testing and Commissioning of surface/recess type wall mounted integrated LED 4 feet fitting with aluminium channel housing for having minimum system lumens 2000 & system efficacy = 100 lumens / watt self Ballastedwith PC diffuser having, power factor of =0.95, CRI of =80, THD =10%, CCT 3000- 6500K(as required), suitable for 230 V, 50 Hz,1-¢ AC supply. |
| 46 | SITC of weather proof pole box made out of hot moulded SMC sheet with clamp /fastner neutral link strip, gland thimble and 1 No. 6 Amps SPMCB Complete with inter connection with copper wire, earthing (Box Size - 300mm x 200 mm x 105 mm) |
| 47 | Supplying and Laying of following size XLPE insulated PVC outer sheathed armoured cable with aluminium Conductor suitable for rated voltage of 1100 Volts ISI marked conforming to IS : 7098-1988 with upto date amendments i/c laying in following way, connection complete etc. as reqd. |
| 48 | 3 X 10 Sq.mm ( laying in pipe) |
| 49 | 3 X 10 Sq. mm (on surfsce) |
| 50 | 3.5 X 35 Sq. mm ( on surface) |
| 51 | 3.5 X 50 Sq. mm (on surface) |
| 52 | 3.5 X 50 Sq. mm ( laying in pipe) |
| 53 | Providing and fixing/laying 6 SWG dia G.I. wire on surface/recess/ in pipe for loop earthing along with existing cable as required. |
| 54 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (40 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 55 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 56 | Rewinding of 1200 mm ceiling fan complete with super enemelled copper winding wire i/c varnishing backing testing commissioning and without returning of scrop copper wire etc. as reqd. |
| 57 | Rewinding of 250 mm to 450mm Exhaust fan/ Desert cooler fan complete with super enemelled copper winding wire i/c varnishing backing testing commissioning andwith credit of scrap copper wire etc. as reqd. |
| 58 | Rewinding repair and servicing of following monoblock/Submersible pump set suitable for run 3 phase, 440 volt, 50 Hz AC supply i/c cartrdge (to and fro) testing, commissioning with credit of scrap copper wire etc.as required. |
| 59 | 3/5 HP monoblock pump set |
| 60 | 3/5 HP submersible /mono subermisible pump set |
| 61 | Withdrawing of all capacity submersible /mono submersible pump set with motor with GI pipes from the existing borewell with the help of chain pully block, tripod and supplying clamp i/c dismentalling ofGI pipe lengths by opening the nut & bolts, stacking the same etc as reqd |
| 62 | Lowering of all capacity submersible / mono subermisiblepump set with motor with GI pipes from the existing borewell with the help of chain pully block, tripod and supplying clamp i/c dismentalling of GI pipe lengths by opening the nut & bolts, stacking the same etc as reqd |
| 63 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 64 | Group C |
| 65 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 66 | Group C |
| 67 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. |
| 68 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 69 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 70 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 71 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 73 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 74 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 amps modular socket outlets and 2 nos 5/6 amps modular switches, connection etc. as required. |
| 75 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, ainting etc. as required. |
| 76 | Complete Servicing of existing installed WTAC /STAC of 1.5 TR & 2.0 TR capacity AC i/c indoor & outdoor units, checking for unit, inspection, greasing, oiling etc i/c chemical cleaning of the condensing coil with high pressure pump changing the air filter, checking & tightening all electic connection, testing the machine etc as reqd. |
| 77 | Supplying & charging of M-22/R22/R-32/R-410A gas in the exising WTAC / STAC of following capacity unit i/c pressure testing, flushing the system & gas charging complete etc as reqd. |
| 78 | 1.5 TR |
| 79 | 2 TR |
| 80 | Repair of damaged PCB of indoor and outdoor unit i/c tightening the loose connection, testing the machine etc as reqd. . |
| 81 | Supplying and fixing of 1.5 / 2 TR capacity WTAC/ Split AC cooling coils i/c pressure testing after removing the leakage with brazing, flashing the system , vaccuming the system, checking & repairing nterconnection complete in all respect as required at site. i.c dismantled of old material etc. as reqd. |
| 82 | Supply & Replacement of 1.5 / 2 TR WTAC / STAC burnt out / defective copper condenser coil with new one of the same size and design suitable for 1.5 / 2 TR Split type AC Out Door unit i/c breezing the all copper pipe with all distribution joint\"s and make sure the connections with capillary tube linking dryer duly proper etc. Nightrogen pressure testing, leak detections, vaccumizing the unit, complete as reqd. i/.c dismantled of old material etc. as reqd |
| 83 | Supplying & fixing of following capacity compressor in the existing WTAC / Split AC making copper pipe connection, brazong pressure testing and supplying and charging M-22/R-32/R-410A refrigerant gas charging i/c cutting the copper piping dismantling of the old compressor complete as reqd. |
| 84 | Compressor - 1.5 TR |
| 85 | Compressor - 2 TR |
| 86 | Providing and fixing WTAC /STAC fan motor capcity 1/4 to 1/8 HP i/c dismantling the burnt out motor from the existing unit & fixing of new motor making onnection, testing complete etc as reqd. |
| 87 | Supplying & fixing of copper refrigerant pipe of size 1/4\", 1/2\" or 5/8\" (as per suitable) with insulation and copper wire 3core 80-20 (2.5 sqmm) i/c all connection in the existing AC units i/c dismantled as per reqd at site. |
| 88 | Supplying, installation, testing & commissioning of openwell/ mono-submersible pump set of 5.0 HP/ 3.7 kW rating operating on 3-¢ 50 Hz A.C. supply having discharge of (10.0 to 3.0) LPS at a head of (26 to 36) meter, complete withPVC insulated PVC sheathed Flat submersible copper conductor cable of standard length and suitable for DOL/star delta starter, Suction - 65, Delivery - 50 i/c lowering the same in existing sump/tank i/c providing GI nuts, bolts, washers, rubber gasket and connecting the pipe line and electrical cable with water proof joint, connection testing etc. as required. |
| 89 | Supplying and fixing of 3 x 4 sqmm flat submersible cable of copper conductor cable alongwith GI pipe line etc. as required. |
| 90 | Sub Head II:- Fire Fighting Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 91 | 25 mm dia |
| 92 | 80 mm dia |
| 93 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal / Stainless Steel cap and chain as required : |
| 94 | Single headed Stainless steel |
| 95 | Supplying and fixing single headed external yard hydrant valve with instantaneous FM Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 96 | Single headed Stainless steel |
| 97 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 98 | 80 mm dia |
| 99 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
| 100 | 80 mm dia |
| 101 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 102 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 103 | 80 mm dia |
| 104 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 105 | Stainless Steel (Grade 304) |
| 106 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 107 | Stainless Steel (Grade 304) |
| 108 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585.20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 109 | 30 mtr |
| 110 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 111 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. |
| 112 | 80 mm dia |
| 113 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 114 | Supplying & replacement of following accessories in existing 63/100 mm dia MS pipe line in fire fighting system i/c dismental existing & fixing new, leakage checking complete etc as required : |
| 115 | Nut bolt and washer (suitable to 63/100 mm dia Pipe) |
| 116 | 3 mm thick rubber gasket (suitable to 63/100 mm dia Pipe) |
| 117 | MS flange as per IS driling 16 mm thick(suitable to 63/100 mm dia Pipe) |
| 118 | Swinging type hose reel complete with 19mm x 40m Thermolplastic hose |
| 119 | 25mm dia gunmetel gate valve with 25mm dia socket/ union/ nipples |
| 120 | Providing and fixing glazing hose reel box,Hydrent box etc. with EPDM rubber / neoprene gasket etc. complete as per thedirections of engineer-in-charge . |
| 121 | With float glass panes of 4.0 mm thickness |
| 122 | Painting (two or more coats) on fire fighting pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. |
| 123 | 100 mm diameter pipes |
| 124 | SITC of Carbon Dioxide (CO2) gas type fire extinguisher of 4.5 Kg. capacitywith initial charge i/c discharge hose and horn, squeeze grip release valve, locking arrangement, bracket with two screw and sleeve i/c fixing on wall as required. (Fire extinguisher shall be ISI marked confirming to IS: 15683) |
| 125 | Supplying & fixing of powder type fire extinguisher (stored pressur type confirming to IS:15683:2006) 6 Kg. capacity with initial refill of ISI marked ABC power completed with squeeze grip, release valve, discharge pipe, pressure gauge, locking safety clip, mounting bracket etc. i/c fixing on wall as required. |
| 126 | Sub Head III:- Fire Alarm Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MSsheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system |
| 127 | 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. |
| 128 | Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. |
| 129 | Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. |
| 130 | Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. |
| 131 | Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set. |
| 132 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. |
| 133 | 4 Zone |
| 134 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 135 | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. |
| 136 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 137 | Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. |
| 138 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 139 | Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/ microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. |
| 140 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 141 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 142 | 25 mm |
| 143 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. |
| 144 | Sub Head - IV (Operation of Lifts)Operation and routine & preventive maintenance of following lifts installed at Old Age Home, Bindapur, New Delhion all day of the month i/c. Sundays & Holidays and cleaning as per terms and conditions attached and by providing following minimum staff. a) Lift- 1 &2 No.-Lift Operator-1 Nos. (9:00AM to 5:00 PM |
