Annual Repair And Maintenance Of N G Drain Construction Of Platform For Fixing And Collecting Point For Arrangement Of Mechanical Conveyor Belt In Punjabi Bagh Store On Ng Drain, Delhi-Delhi
TDR : 42715601
Tender Notice
BOQ
Expired
Delhi
Delhi
Annual Repair And Maintenance Of N G Drain Construction Of Platform For Fixing And Collecting Point For Arrangement Of Mechanical Conveyor Belt In Punjabi Bagh Store On Ng Drain
Name of Work:-A/R & M/O N.G. Drain.Sub- Work:- Construction of Platform for Fixing and Collecting point for Arrangement of Mechanical Conveyor Belt in Punjabi Bagh Store on NG Drain.
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
2
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
3
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
4
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
5
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
6
Providing and laying RMC of M-30 grade By using minimum 400kg of cement(43 grade, OPC) per cum of concrete in roads / streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/ retard setting of concrete to improve workability with out impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction / expansion, construction of cross / longitudinal joints of size 10mm wide 50mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer in-charge. (Cost of joint filler & sealants shall be paid for separately under relevant items).Note:- Cement content considered in M-30 is @ 400 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately M-30 RMC by using minimum cement @400 kg/cum. Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer.
7
Supply of earthby mechanical transport at site including royalty, loading, unloading, stacking and bankingthe same in layers not exceeding 20 cm in depth, breaking clods, watering, rolling eachlayer with 1/2 tonne roller or wooden or steel rammers with lead upto 20 kmand lift up to 1.5m all complete
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
